• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.5
• /
• pp.28-36
• /
• 2001

The purpose of this study is to research the influence of soundscape in the preference of landscape. Specifically, standards type of communication are applied to the landscape such as positive scenery and negative scenery. The spatial image was analyzed by the variables of Kaplan\`s information process model. The level of visual preferences was measured by a type of acoustic information and visual information in the landscape, and this data was analyzed by multiple regression. The results of this study can be summarized as follows; The value of landscape preference was maximum value in Type I and minimum value in Type II from all fluent of coherence, mystery, and legibility to, except complexity, and it was not different from preference. These results clearly show the influence of sounds effecting decision of landscape preference. It was different by the type of acoustic information and visual information in landscape. The results of ANOVA among types of acoustic information were differences of mean between positive sound, no sound and negative sound from coherence, mystery, and legibility to, except complexity. These variables may be the major factors which must be considered in planning and designing as the functional basis for quantitative analysis.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.686-689
• /
• 2014

This paper studies energy-efficiency (EE) power allocation for cognitive radio MIMO-OFDM systems. Our aim is to minimize energy efficiency, measured by "Joule per bit" metric, while maintaining the minimal rate requirement of a secondary user under a total power constraint and mutual interference power constraints. However, since the formulated EE problem in this paper is non-convex, it is difficult to solve directly in general. To make it solvable, firstly we transform the original problem into an equivalent convex optimization problem via fractional programming. Then, the equivalent convex optimization problem is solved by a sequential quadratic programming algorithm. Finally, a new iterative energy-efficiency power allocation algorithm is presented. Numerical results show that the proposed method can obtain better EE performance than the maximizing capacity algorithm.

• Phonetics and Speech Sciences
• /
• v.14 no.2
• /
• pp.11-17
• /
• 2022

English vowels play an important role in verbal communication. However, Korean students tend to experience difficulty pronouncing a certain set of vowels despite extensive education in English. The aim of this study is to apply speech recognition software to evaluate Korean students' pronunciation of English vowels in minimal pair words and then to examine acoustic characteristics of the pairs in order to check their pronunciation problems. Thirty female Korean college students participated in the recording. Speech recognition rates were obtained to examine which English vowels were correctly pronounced. To compare and verify the recognition results, such acoustic analyses as the first and second formant trajectories and durations were also collected using Praat. The results showed an overall recognition rate of 54.7%. Some students incorrectly switched the tense and lax counterparts and produced the same vowel sounds for qualitatively different English vowels. From the acoustic analyses of the vowel formant trajectories, some of these vowel pairs were almost overlapped or exhibited slight acoustic differences at the majority of the measurement points. On the other hand, statistical analyses on the first formant trajectories of the three vowel pairs revealed significant differences throughout the measurement points, a finding that requires further investigation. Durational comparisons revealed a consistent pattern among the vowel pairs. The author concludes that speech recognition and analysis software can be useful to diagnose pronunciation problems of English-language learners.

• Journal of information and communication convergence engineering
• /
• v.3 no.3
• /
• pp.137-141
• /
• 2005

The paper presents some methods to improve characteristics of film bulk acoustic resonator (FBAR) devices. The FBAR devices were fabricated on Bragg reflectors. Thermal treatments were done by sintering and/or annealing processes. The measurement showed a considerable improvement of return loss $(S_{11})$ and quality factor $(Q_{s/p}).$ These thermal treatment techniques seem very promising for enhancing FBAR resonance performance.

• Journal of information and communication convergence engineering
• /
• v.4 no.3
• /
• pp.111-113
• /
• 2006

A new thin film deposition technique of piezoelectric ZnO film and its successful application for film bulk: acoustic resonator (FBAR) devices are presented. The two-step deposition used seems to be able to deposit ZnO film with a highly preferred orientation. The FBAR devices with the ZnO films show an excellent return loss of $35{\sim}50$ dB at $1.5{\sim}2$ GHz.

• Journal of Biomedical Engineering Research
• /
• v.27 no.6
• /
• pp.376-383
• /
• 2006

Noise induced hearing loss (NIHS), the well-known occupational disease, is caused by continuous excessive noise. The prevention of NIHS is very important, because it is unrecoverable. There are some kinds of hearing protection device (HPD), and those are effective in preventing NIHS. But workers in noisy environment often resist to wearing them. Because they are ready - made products, so workers feel uncomfortable to wear. Also, they didn't maintain the conversation frequency range, so workers are hard to communicate in wearing them. To prevent hearing loss effectively, it is important that workers keep wearing HPD. Therefore, a HPD is needed to be comfortable to wear and be effective not only in hearing protection but also in preserving communication ability. So we proposed a custom - made hearing protection device in which a small acoustic filter is inserted. We designed several kinds of small acoustic filters and carried out some acoustic experiments for measuring characteristics of filters. We confirmed that acoustic transmission characteristic can be adjusted from experimental results using designed small acoustic filters. And we researched for the actual efficiency of a new developed custom - made hearing protection device using a small size acoustic filter. Also, we found out that workers are more satisfied with the new development than a former protection device from a workers' response.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.373-383
• /
• 2012

The performance of underwater acoustic communication system is sensitive to the Doppler shift and ISI(Inter-Symbol Interference). Therefore, the simulation algorithm needs to consider time-spread due to multipath arrivals which cause the ISI, and time-varying Doppler shift along with moving source and receiver. For this purpose, VirTEX(Virtual Time series EXperiment) based on Ray model has been developed. In this paper, VirTEX is used to compare the characteristics of ocean waveguide from the experimental data and illustrate the performance. The CIR(Channel Impulse Response) that characterizes the multipath arrivals with representative time-spread due to multipath arrivals is compared between numerically simulated and experimental probe signal. Also, the communication performance analysis for BER(Bit Error Rate) is compared between numerically simulated and experimental data signal. As a result, VirTEX can be useful as a simulation tool for evaluating the performance of underwater acoustic communication system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.436-442
• /
• 2022

In this paper, the performance of the selective combining according to the channel selection decision method of frequency diversity is evaluated in the underwater frequency selective channel. The underwater acoustic channel in the shallow sea has a complex multipath characteristic by combining various environmental factors such as boundary surface reflection and sound wave refraction according to the water temperature layer. In particular, frequency selectivity due to multipath causes energy fluctuation in a communication channel, which reduces SNR (Signal to Noise Ratio) and deteriorates communication performance. In this paper, we applied the frequency diversity technique using multiple channels to secure the communication performance according to the frequency selectivity by multipath. For each channel, 4-FSK (Frequency Shift Keying) and selective combining were applied, the performance was evaluated by applying the maximum value, average value, and majority decision of the signal in order to decide the demodulation channel selection of the selective combining.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.366-374
• /
• 2007

In underwater wireless communication, needs for long distance communication using the high frequency are surpassing ones of short range communication by ultrasonic wave, and demands for transmitting and receiving various data such as voice or high resolution image data are increasing as well. In this work, we studied the effects on the real underwater communication depending on the difference of digital modulation methods. Simulation shows that only the performance of GMSK among many other PSK based modulation schemes(BPSK, QPSK, MSK, GMSK) is significant. Test condition simulates the oceanographic conditions along the 207-survey line, 15Km south of Busan and SNR is maintained 35dB or below. Simulated tests are composed of both transmitting image data($3{\times}10^5$ pixel, 4 bit per pixel) and voice communication($10^{-2}$BER, channel capacity of 1Kbps). Test results show that there are gain of about 7 seconds in transmission time in image transmission case, where channel capacity for BPSK, QPSK, and MSK and for GMSK were 65 Kbps and 45 Kbps, respectively and gain of about 8Km in distances in voice communication case.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.3E
• /
• pp.104-110
• /
• 2007

As the exploration of the seabed is extended ever further, automated recognition and classification of sonar images become increasingly important. However, most of the methods ignore the directional information and its effect on the image textures produced. To deal with this problem, we apply 2D Gabor filters to extract the features of sonar images. The filters are designed with constrained parameters to reduce the complexity and to improve the calculation efficiency. Meanwhile, at each orientation, the optimal Gabor filter parameters will be selected with the help of bandwidth parameters based on the Fisher criterion. This method can overcome some disadvantages of the traditional approaches of extracting texture features, and improve the recognition rate effectively.