• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.101-106
• /
• 2017

In this paper, we present Emergency exit signs are installed to provide escape routes or ways in buildings like shopping malls, hospitals, industry, and government complex, etc. and various other places for safety purpose to aid people to escape easily during emergency situations. In case of an emergency situation like smoke, fire, bad lightings and crowded stamped condition at emergency situations, it's difficult for people to recognize the emergency exit signs and emergency doors to exit from the emergency building areas. This paper propose an automatic emergency exit sing recognition to find exit direction using a smart device. The proposed approach aims to develop an computer vision based smart phone application to detect emergency exit signs using the smart device camera and guide the direction to escape in the visible and audible output format. In this research, a CAMShift object tracking approach is used to detect the emergency exit sign and the direction information extracted using template matching method. The direction information of the exit sign is stored in a text format and then using text-to-speech the text synthesized to audible acoustic signal. The synthesized acoustic signal render on smart device speaker as an escape guide information to the user. This research result is analyzed and concluded from the views of visual elements selecting, EXIT appearance design and EXIT's placement in the building, which is very valuable and can be commonly referred in wayfinder system.

• Ocean and Polar Research
• /
• v.27 no.3
• /
• pp.335-339
• /
• 2005

The underwater positioning system is important in interpreting data that are acquired from towing vehicles such as the deep-sea camera (DSC) system. Currently, several acoustic positioning systems such as long baseline (LBL), short baseline (SBL), and ultra short baseline (USBL), are used for underwater positioning. The accurate position of DSC, however, could not be determined in a R/V Onnuri unequipped with any of these underwater positioning systems. As an alternative, the DSC position was estimated based on the topography of towing track and cable length in the cruises before 1999. The great uncertainties, however, were found in the areas of flat bottom topography. In the 2003 and 2004 cruises these uncertainties were reduced by calculating the position of DSC with the cable length and seafloor depth below the vessel. The Japanese cruises for Mn-nodule used a similar estimation method for the DSC positioning system with a CTD sensor. Although the latter can provide better information for the position of DSC, the USBL underwater positioning system is strongly recommended for establishing better positioning of DSC and other towing devices.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.89-93
• /
• 2003

The Korea Research Institute of Ships and Ocean Engineering (KRISO), the ocean engineering branch of KORDI, has designed and manufactured a model of an autonomous underwater vehicle (AUV) to test underwater docking. This paper introduces the AUV model, ASUM, equipped with a visual servo control system to dock into an underwater station with a camera and motion sensors. To make a visual servoing AUV, this paper implemented the visual servo control system designed with an augmented state equation, which was composed of the optical flow model of a camera and the equation of the AUV's motion. The system design and the hardware configuration of ASUM are presented in this paper. A small long baseline acoustic positioning system was developed to monitor and record the AUV's position for the experiment in the Ocean Engineering Basin of KRISO, KORDI. ASUM recognizes the target position by processing the captured image for the lights, which are installed around the end of the cone-type entrance of the duct. Unfortunately, experiments are not yet conducted when we write this article. The authors will present the results for the docking test of the AUV in near future.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.151-162
• /
• 2020

This paper presents an acoustic inversion method for estimating the bubble size distribution. The estimation error of the attenuation coefficient represented by a Fredholm integral equation of the first kind is defined as an objective function, and an optimal solution is found by applying the Levenberg-Marquardt (LM) method. In order to validate the effectiveness of the inversion method, numerical simulations using two types of bubble distribution are performed. In addition, a series of experiments are carried out in a water tank (1.0 m × 0.54 m × 0.6 m), using bubbles generated by three different generators. Images of the distributed bubbles are obtained by a high-speed camera, and the insertion losses of the bubble layer are measured using a source and a hydrophone. The image is post-processed to glance a distribution characteristics of each bubble generator. Finally, the size distribution of bubbles is estimated by applying the inversion method to the measured insertion loss. From the inversion results, it was observed that the number of bubbles increases exponentially as the bubble size decreases, and then increases again after the local peak at 70 ㎛ - 120 ㎛.

• Geophysics and Geophysical Exploration
• /
• v.26 no.1
• /
• pp.8-17
• /
• 2023

Various sources, such as wind, waves, ships, and gas leaks from the seafloor, forms bubbles in the ocean. Underwater bubbles cause signal scattering, considerably affecting acoustic measurements. This characteristic of bubbles is used to block underwater noise by attenuating the intensity of the propagated signal. Recently, researchers have been studying the large-scale release of methane gas as bubble plumes from the seabed. Understanding the physical properties and distribution of bubble plumes is crucial for studying the relation between leaked methane gas and climate change. Therefore, a water tank experiment was conducted to estimate the distribution of bubble plumes using seismic imaging techniques and acoustic signals obtained from artificially generated bubbles using a bubble generator. Reverse time migration was applied to image the bubble plumes while the acquired acoustic envelope signal was used to effectively estimate bubble distribution. Imaging results were compared with optical camera images to verify the estimated bubble distribution. The water tank experiment confirmed that the proposed system could successfully image the distribution of bubble plumes using reverse time migration and the envelope signal. The experiment showed that the scattering signal of artificial bubble plumes can be used for seismic imaging.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.243-249
• /
• 2023

The occurrence of cavitation on the propeller is directly linked to the naval ship's survivability, and it is necessary to design a propeller shape that delays the cavitation inception. However, the propeller cavitation can occur under various operating conditions, thus it is important to identify whether the propeller cavitation exists during operation as well as in the design phase. To this end, it is necessary to use noise or vibration signals on board to monitor the cavitation inception. In this study, a hydrophone and an accelerometer were installed on the ship hull right above the propeller to compare the performance of analyzing cavitation inception between acoustic and vibration signals. Also, a high speed camera was used to visually observe the occurrence of cavitation through an observation window. The measured results showed that the spectral shapes between acoustic and vibration signals were different, but the level increases at each frequency band and the overall level of the frequency band from 1 kHz to 10 kHz showed a similar tendency. The Detection of Envelope Modulation On Noise (DEMON) analysis also showed similar results for both acoustic and vibration signals, confirming that both hydrophones and accelerometers can be utilized in the analysis of cavitation inception.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1491-1498
• /
• 2000

In recent years, CFRP composite materials have been increasingly used in various fields of engineering because of a high specific strength and stiffness properties. Drilling is one of the most impo rtant cutting processes that are generally carried out on CFRP materials owing to the need for the structural integration. However, delamination are often occurred as one of the drilling damages. Therefore, there are needs studying for the relationships between CFRP drilling and delamination in order to avoid low strength of the structures and inaccuracies of the integration. In this study, AE signals and thrust forces were used for the evaluations of the delamination from a drilling process in [0/900]s CFRP materials. And the drilling damage processes were observed and measured by a real time monitoring technique with a video camera. From the results, we found that the relationships between the delamination from drilling and AE characteristics and drill thrust forces for [0/900]s CFRP composites. Also, we proposed the monitoring method for a visual analysis of drilling damages.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.50-58
• /
• 1996

The authors carried out a field experiment to confirm the effect of underwater sound on the luring of fish schools in a setnet in the coast of Cheju Island. The effects of the acoustic emission on the luring of fish schools were observed using a manufectured underwater speaker in the setnet, and pure sound, of which frequency was 600Hz and the source level was 126dB, was emitted on and off at 5 minutes intervals in the set net during the night of ,July 29 and ,July 31. So we had recorded behavior of fish schools by the telesounder with two channel and shape of the setnet by underwater video camera and analyzed them. When the flood and ebb currents were around the setnet, the nets rised to the surface of water and it happened occasionaly at the stand of tide. Therefore, it was in the state that fish schools feel constraint to enter into the setnet, and was required a new design of the setnet stand up to strong tidal current. As the pure sound, of which frequency was 600Hz was emitted for the luring of fish schools in a setnet, the catch ammounts of fish, the young horce mackereWI'rachllrlls japonicus), was increased 4~6 times than not emitted.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.2 s.33
• /
• pp.142-150
• /
• 2007

Objectives : This study was carried out to investigate the latest study tendency in mouse model of skin pruritus published since 2005 and to arrange various experimental methods. Methods : We examined the journal(such as Experimental dermatology and British journal of dermatology) and in Pubmed since 2005, regarded pruritus and scratching behavior model as key words. Results and Conclusion : 1. BALB/c, hairless, NC/Nga and ICR mice were the most used in scratching behavior model. According to scratching-induced agents. we need to select experimental mice. 2. There are various methods inducing skin pruritus; by cohabitation with NC/Nga mice having severe skin lesions, by injection intradermally(or subcutaneously) with agent inducing inflammation, by inducing contact dermatitis with TNCB, TNFB, destruction of skin barrier and by transgenic mice. 3. Injection intradermally(or subcutaneously) with agent inducing inflammation is the most used out of methods inducing skin pruritus. Compound 48/80, histamine, substance P and others(chloroquine, serotonin, carrageenin, TPA etc.) were included in agents inducing inflammation and pruritus in skin pruritus model. 4. Video camera, SCLABA system, MicroAct and acoustic evaluation system were included in evaluation methods of scratching behavior mouse model.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.3
• /
• pp.253-260
• /
• 2014

conducted. In-situ measurements were conducted to investigate the noise characteristics in high-speed trains such as KTX and KTX-Sancheon. Binaural microphones and spherical microphone were adopted to record and evaluate the spectral characteristics and noise incidence characteristics at the seats in the passenger cars. Environmental elements were also recorded during the noise measurements using a camcorder and GPS application. In addition, auditory tests were conducted to investigate annoyance of interior noise of high-speed trains. Based on the objective measure and subjective responses on interior noise, statistical analysis such as correlation and regression analyses were carried out. From the results perception models for evaluating the interior noise of high-speed train were derived.