• 대한기계학회논문집A
• /
• 제40권9호
• /
• pp.767-773
• /
• 2016

산 및 알칼리 용액 속에 침지한 SiC 세라믹의 기계적 특성은 와이블 통계로 해석하였다. 시험편은 1373K에서 열처리를 행하였다. SiC의 부식은 KSL1607 방법에 의한 산 및 알칼리 용액 속에서 수행하였다. 부식된 균열치유재의 굽힘 강도는 부식되지 않은 균열치유재의 굽힘강도보다 산 및 알칼리 용액 속에서 각각 47% 및 70% 감소하였다. SiC 세라믹의 부식은 산 용액 속에서보다 알칼리 용액 속에서 더 빨랐다. 척도 파라미터 및 형상 파라미터는 모재와 부식재에서 평가하였다. 산 및 알칼리 용액에서 부식된 모재의 형상 파라미터는 산용액에서 크게 나타났다. 그러나 열처리재는 산용액에서 크게, 알칼리 용액에서 작게 나타났다. 모재 및 열처리재의 척도 파라미터는 산 및 알칼리 용액에서 모두 작게 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.323-323
• /
• 2010

Saw damage of crystalline silicon wafer is unavoidable factor. Usually, alkali treatment for removing the damage has been carried out as the saw damage removal (SDR) process for priming the alkali texture. It usually takes lots of time and energy to remove the sawed damages for solar grade crystalline silicon wafers We implemented two different mixed acidic solution treatments to obtain the improved surface structure of silicon wafer without much sacrifice of the silicon wafer thickness. At the first step, the silicon wafer was dipped into the mixed acidic solution of $HF:HNO_3$=1:2 ration for polished surface and at the second step, it was dipped into the diluted mixed acidic solution of $HF:HNO_3:H_2O$=7:3:10 ratio for porous structure. This double treatment to the silicon wafer brought lower reflectance (25% to 6%) and longer carrier lifetime ($0.15\;{\mu}s$ to $0.39\;{\mu}s$) comparing to the bare poly-crystalline silicon wafer. With optimizing the concentration ratio and the dilution ratio, we can not only effectively substitute the time consuming process of SDR to some extent but also skip plasma enhanced chemical vapor deposition (PECVD) process. Moreover, to conduct alkali texture for pyramidal structure on silicon wafer surface, we can use only nitric acid rich solution of the mixed acidic solution treatment instead of implementing SDR.

• The Korean Journal of Physiology and Pharmacology
• /
• 제21권2호
• /
• pp.215-223
• /
• 2017

The effects of acidic pH on several voltage-dependent ion channels, such as voltage-dependent $K^+$ and $Ca^{2+}$ channels, and hyperpolarization-gated and cyclic nucleotide-activated cation (HCN) channels, were examined using a whole-cell patch clamp technique on mechanically isolated rat mesencephalic trigeminal nucleus neurons. The application of a pH 6.5 solution had no effect on the peak amplitude of voltage-dependent $K^+$currents. A pH 6.0 solution slightly, but significantly inhibited the peak amplitude of voltage-dependent $K^+$ currents. The pH 6.0 also shifted both the current-voltage and conductance-voltage relationships to the depolarization range. The application of a pH 6.5 solution scarcely affected the peak amplitude of membrane currents mediated by HCN channels, which were profoundly inhibited by the general HCN channel blocker $Cs^+$ (1 mM). However, the pH 6.0 solution slightly, but significantly inhibited the peak amplitude of HCN-mediated currents. Although the pH 6.0 solution showed complex modulation of the current-voltage and conductance-voltage relationships, the midpoint voltages for the activation of HCN channels were not changed by acidic pH. On the other hand, voltage-dependent $Ca^{2+}$ channels were significantly inhibited by an acidic pH. The application of an acidic pH solution significantly shifted the current-voltage and conductance-voltage relationships to the depolarization range. The modulation of several voltage-dependent ion channels by an acidic pH might affect the excitability of mesencephalic trigeminal nucleus neurons, and thus physiological functions mediated by the mesencephalic trigeminal nucleus could be affected in acidic pH conditions.

• 한국환경과학회지
• /
• 제11권3호
• /
• pp.263-269
• /
• 2002

This study was conducted to know the removal characteristics of ammonia nitrogen by commercially available cation exchange resins. Eight acidic cation exchange resins were investigated in batch reactors. Among them, the most effective resin for ammonia removal in solution was PK228, which was a strong acidic resin of $Na^{+}$ type. PK228 was compared with activated carbon and natural zeolite. The effects of cation exchange capacity, ammonia concentration, resin amount, temperature and pH on ammonia removal by PK228 were investigated in batch reactor, and the effect of effluent velocity in continuous column reactor. Strong acidic resins of porous type were more effective than week acidic resins or gel type resins for ammonia removal in solution. PK228 was more effective than activated carbon and natural zeolite for ammonia removal in batch reactor. With increasing initial ammonia concentration, the amount of ammonia removed by PK228 increased, but the proportion of removed ammonia to initial ammonia concentration decreased. The effect or temperature on ammonia removal by PK228 was very slight. The ammonia removal to acidic solution was more effective than that at basic solution. With decreasing effluent velocity of solution through column, breakthrough point extended, and ammonia removal capacity increased.d.

• Journal of Pharmaceutical Investigation
• /
• 제27권4호
• /
• pp.313-321
• /
• 1997

Ion exchange resin complexes of famotidine have been prepared by the reaction of famotidine solution with activated ion exchange resins. Complex formation efficiency between famotidine and ion exchange resin was about $80{\sim}90%$ in average, calculated by HPLC determination. Drug release characteristics from the resin complexes were evaluated by the modified percolation method. Famotidine release was dependent on the type of ion exchange resins. In the case of weakly acidic resin complexes, the cumulative released amount of famotidine was more than 90% for 1hr in pH 1.2 buffer solution. However, in the case of strongly acidic resin complexes, it was less than 5% for 3hr in the same medium. Strongly acidic resins revealed some advantages over weakly, acidic resins for overcoming instability of famotidine in gastric juice. In addition, strongly acidic resin complexes showed controlled release of famotidine in pH 6.8 buffer solution, showing the result of about 60 to 70% of drug release for 5hr. After oral administrations of famotidine-resin complexes to rats as dose of 40 mg equivalent/kg, the pharmacokinetic parameters of famotidine were obtained by model independent analysis and compared with those of famotidine solution or suspension. $C_{max}$ of famotidine-resin complex was lower than that of famotidine solution or suspension. MRT, MAT, and MDT of the complexes were greater than those of famotidine solution or suspension. From these results, it was expected that famotidine was released slowly from the complexes and absorbed continuously into systemic circulation. It was recognized that drug release from the complexes was the rate-limiting step in drug absorption, since there were close correlations between in vitro drug release and in vivo pharmacokinetic parameters.

• 한국표면공학회지
• /
• 제39권4호
• /
• pp.190-197
• /
• 2006

The effects of blasting and acidic treatment on the corrosion characteristics of dental implant fabricated with Cp-Ti and Ti-6Al-4V alloy have been researched by using electrochemical methods. The fabricated implants were cleaned and sandblasted by $Al_2O_3$ powder and then acidic treatment was carried out in nitric acid solution. The surface morphology were observed using scanning electron microscope. The corrosion behaviors were investigated using potentiosat and EIS in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The potentio-dynamic test in 0.9% NaCl indicated that the corrosion potential of blasting and acidic treated implant was lower than that of non treated implant, but current density was higher than that of non treated implant. From the cyclic potentiodynamic test results of Ti implant, the passivation current density of blasting and acidic treated implant slightly higher than that of non treated implant. From A.C. impedance test results in 0.9% NaCl solution, polarization resistance($R_p$) value of blasting and acidic treated implant was lower than that of non treated implant. In case of blasting and acidic treated implant surface, the pits were observed in valley and crest of implant surface.

• 한국재료학회지
• /
• 제27권2호
• /
• pp.113-118
• /
• 2017

Natural and expandable graphites were chemically treated in acidic aqueous solutions such as acetic acid or mixtures of acetic acid and nitric acid. Structures and thermal conductivities of the as-treated graphites were characterized in detail. Both graphites were significantly oxidized in the mixed acidic solution of $H_2SO_4$ and $HNO_3$, which condition was generally used for the oxidation of carbon nanotubes. This considerable oxidation of graphites caused a depression of their thermal conductivity. The structural characteristics, obtained by XRD and XPS, show that the graphites treated in the relatively weak acidic conditions (acetic acid or mixture of acetic acid and nitric acid) were quite similar to the untreated graphites. However, the thermal conductivities of both acidic-treated graphites were remarkably increased.

• Journal of Ginseng Research
• /
• 제17권2호
• /
• pp.139-144
• /
• 1993

The method for colorimetric determination of acidic polysaccharide from Panax ginseng was investigated. It is possible to apply the method of carbazole-sulfuric acid to determination of pectin, and also to measure the amount of pectin in the mixture of various high molemlu compounds such as starch. cellulose and gum, etc. When the method of carbazole-sulfuric acid was applied to determine the amount of acidic polysaccharide, optical density at 525 nm increased linearly with an increase in the concentration of pure acidic polysaccharide. Effective extraction temperature with water for the determination of the amount of ginseng acidic polysaccharide (GAP) was $80{\circ}C$. In order to separate or concentrate GAP it was appropriate to precipitate the extract only once with 80% ethyl alcohol. GAP was very stable at $100{\circ}C$ for 4 hrs in aqueous solution and between pH values of 5.0~ 12.0.

• Food Science and Biotechnology
• /
• 제18권3호
• /
• pp.732-738
• /
• 2009

An acidic polygalacturonase (PG) from Aspergillus kawachii was produced by solid state fermentation employing a polyurethane foam support. The conditions used for the production of acidic PG were particle size of support (0.6 or 500 $mm^3$) and fermentation time. From the factors studied, the particle size had important influence on enzyme production. The best conditions for acidic PG production were $0.6\;mm^3$ particle size, 18 hr at $30^{\circ}C$ and initial pH of 5.0. In addition, pectin was extracted from citrus pomaces (grapefruit, lime, and tangerine) by acidic PG at $50^{\circ}C$ for 24 hr with citric acid solution. Infrared spectroscopy showed that lime pomace had more high-methoxylated (65%) endogenous pectin than was obtained than from grapefruit or tangerine pomaces. The enzymatically extracted pectin yield in dry basis (d.b.) for grapefruit and lime pectins were 6.95 and 4.25%, respectively. The citric acid solution alone also contributed to pectin extraction from citrus pomaces (7-9%, d.b.). Limited pectin extraction by acidic PG from tangerine pomace was most likely due to the presence of low-methoxylated endogenous pectin. The enzymatic method for pectin extraction using acidic PG from A. kawachii is a promising technique for releasing highly polymerized pectic substances from high-methoxylated lime or grapefruit pomaces.

• 전기화학회지
• /
• 제9권2호
• /
• pp.70-76
• /
• 2006

마이크로 전기화학 실험법인 비접촉식 미세방울셀이 산 용액에 노출된 저 크롬이 함유된 스테인리스강(STS 316)과 같이 젖음성이 높은 전기화학계에 사용되는데 어려움이 있었다. 음압의 인가, 방울의 크기 제어 그리고 소수성의 개스킷의 사용은 높은 젖음성을 지닌 표면에서 비접촉식 미세방울셀의 적용을 가능하게 하였다. 개선된 미세방울셀의 신뢰성을 확인하고자 3종류의 다른 계-산성염화용액과 고 크롬 페라이트 스테인리스강, 산성염화용액과 STS 316 그리고 중성염화용액과 STS 316-에 대하여 개선된 미세방울셀로 국부부식 연구를 수행하였다. 첫째 산성용액에서 고 크롬강의 양극 분극 결과는 $\alpha/\sigma$ 계면 근처에서 국부부식이 크롬 고갈층에 의한 것임을 보여주었다. 둘째 산성용액에서 STS316의 양극 분극실험이 개선된 미세방울셀에서 성공적으로 수행됨을 확인할 수 있었다. 특히, 미세방울셀에서 얻어진 국부 양극 분극곡선을 통해 STS316의 내식성에 미치는 $\delta$-라이트 영향을 밝힐 수 있었다. 마지막으로 중성염화 용액에서 STS316의 양극 분극곡선은 핏팅 저항성이 $\delta$-페라이트보다 개재물에 의존됨을 보여주었다.