• Journal of Microbiology and Biotechnology
• /
• 제19권8호
• /
• pp.845-850
• /
• 2009

Bioethanol derived from lignocellulosic biomass has the potential to replace gasoline. Cellulose is naturally recalcitrant to enzymatic attack, and it also surrounded by the matrix of xylan and lignin, which enhances the recalcitrance. Therefore, lignocellulosic materials must be pretreated to make the cellulose easily degraded into sugars and further fermented to ethanol. In this work, hydrothermal pretreatment on corn stover at $195^{\circ}C$ for 15 min with and without lower concentration of formic acid was compared in terms of sugar recoveries and ethanol fermentation. For pretreatment with formic acid, the overall glucan recovery was 89% and pretreatment without formic acid yielded the recovery of 94%. Compared with glucan, xylan was more sensitive to the pretreatment condition. The lowest xylan recovery of 55% was obtained after pretreatment with formic acid and the highest of 75% found following pretreatment without formic acid. Toxicity tests of liquor parts showed that there were no inhibitions found for both pretreatment conditions. After simultaneous saccharification and fermentation (SSF) of the pretreated corn stover with Baker's yeast, the highest ethanol yield of 76.5% of the theoretical was observed from corn stover pretreated at $195^{\circ}C$ for 15 min with formic acid.

• Journal of the Korean Wood Science and Technology
• /
• 제41권2호
• /
• pp.111-122
• /
• 2013

The steam explosion-chemical pretreatment is a more effective wood pretreatment technique than the conventional physical pretreatment by accelerating reactions during the pretreatment process. In this paper, two-stage pretreatment processes of hardwood were investigated for its enzymatic hydrolysis and the succinic acid yield from the pretreated solid. The first stage pretreatment was performed under conditions of low severity to optimize the amount of solid recovery. In the second stage pretreatment washed solid material from the first stage pretreatment step was impregnated again with chemical (alkaline or chlorine-based chemicals) to remove a portion of the lignin, and to make the cellulose more accessible to enzymatic attack. The effects of pretreatment were assessed by enzymatic hydrolysis and fermentation, after the two stage pretreatments. Maximum succinic acid yield (16.1 g $L^{-1}$ and 77.5%) was obtained when the two stage pretreatments were performed at steam explosion -3% KOH.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.45-50
• /
• 1997

This research was studied for dissolving pulp preparation as the raw material of viscose rayon from woody biomass by solvolysis pretreatment. In the change of pulp characteristic after solvolysis pretreatment, the following results were obtained. In the case of solvolysis pretreatment, we have obtained pulp that high purity cellulose, and degree of polymerization was inclined to decrease less than 440 on the phosphoric acid as catalyst. Comparing phosphoric acid and formic acid as catalyst in the solvolysis pretreatment, using on formic acid catalyst is superior to phosphoric acid catalyst for making dissolving pulp.

• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.149-158
• /
• 2010

Organosolv pretreatments which utilized sulfuric acid, sodium hydroxide and ammonia as catalysts were conducted to screen the effective catalyst for organosolv pretreatment of Liriodendron tulipifera. The enzymatic hydrolysis was achieved effectively with sulfuric acid (74.2%) and sodium hydroxide (63.7%). They were thus considered as effective catalysts for organosolv pretreatment of L. tulipifera. The organosolv pretreatments with sulfuric acid and sodium hydroxide showed a different behavior on the reaction mechanism. The pretreatment with sulfuric acid increased the biomass roughness and pore numbers. On the other hand, the pretreatment with sodium hydroxide enhanced the surface area due to the size reduction and minor defiberization which were caused by hemicellulose degradation at an initial stage and more defiberization by lignin degradation at a later stage. The organosolv pretreatment with sodium hydroxide was performed at several different conditions to evaluate effectiveness of sodium hydroxide as a catalyst for organosolv pretreatment. According to the results of enzymatic digestibility, the changes of chemical composition and the morphological analysis of pretreated biomass, it was suggested that the pretreatment time impacted primarily on enzymatic hydrolysis. Increase in surface area during the pretreatment was a major cause for improvement in enzymatic digestibility when sodium hydroxide was used as a catalyst.

• Korean Chemical Engineering Research
• /
• 제56권4호
• /
• pp.542-546
• /
• 2018

본 연구에서는 해양 거대조류 중 홍조류에 속하는 꼬시레기(Gracilaria verrucosa)로부터 malonic acid를 사용하여 열수 전처리 조건(전처리 온도, 촉매 농도, 고액비, 전처리 시간)에 따른 전처리와 효소가수분해를 통한 바이오슈거(환원당) 생산 가능성을 조사하였다. 300 mM malonic acid, 1:20 고액비 조건에서 $130^{\circ}C$에서 60분간 전처리를 수행하여 49.2%의 환원당 수율을 얻었다. 전처리 반응 후 이어진 효소 가수분해를 통하여 64.5%의 수율을 확보하였다.

• 유기물자원화
• /
• 제19권3호
• /
• pp.79-89
• /
• 2011

강원도에서 확보한 폐옥수수대는 글루칸 44.6 %, 자일란 23.8 %, 리그닌 23.8 %, 회분 4.5 %, 기타 8.1 %로 이루어져 있다. 묽은 황산을 이용한 전처리 공정을 통계적 방법인 완전요인배치으로 분석한 결과 온도가 가장 중요한 변수로 나타났으며 자일로스 수율 기준으로 처리 시간과 농도에 비해 각각 3.5배와 3.2배 큰 영향력을 보여주었다. 포도당 수율에 대해서도 온도의 영향력이 가장 큰 것으로 나타났지만 포도당 수율은 전체적으로 5 % 이내의 낮은 값을 나타내었다. 마이크로웨이브와 초음파 각각을 이용한 전처리 공정은 그 효과가 크지 않거나 미미하였으나 묽은 황산처리와 복합적으로 적용했을 때는 그 효과는 상당히 큰 것으로 나타났다. 특히 마이크로웨이브와 묽은 황산처리를 순차적으로 적용했을 때 자일로스 수율은 2배 넘게 향상되었다. 향후에는, 다양한 복합 전처리 공정에 대한 심도있는 연구와 더불어 전처리와 효소당화 공정의 최적화에 대한 연구를 수행할 계획이다.

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.96-104
• /
• 2015

This study examined the pretreatment effect, appropriate dyeing conditions, color fastness and functionality of cotton fabrics dyed with Zizania latifolia Turcz. Dye uptake was substantially increased by pretreatment and chitosan pretreatment was much more effective than tannic acid pretreatment. Optimal dyeing conditions were colorant concentration of 100%, dyeing temperature of $100^{\circ}C$, dyeing time of 80 minutes and dyebath pH of 5.5. Color fastness of chitosan pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 3(alkaline) and 3 respectively. Color fastness of tannic acid pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 4-5(alkaline) and 4 respectively. Deodorization rates of ammonia(NH3) were 99.9% in both cases. UV protection rate were 98.3% of UV-A and 98.5% of UV-B in case of chitosan pretreatment. UV protection rate were 98.2% of UV-A and 98.5% of UV-B in case of tannic acid pretreatment. UV protection factor(UPF) was 50+ in both cases. Reduction rate of Staphyloccus aureus were 99.9% in both cases. Therefore Zizania latifolia Turcz. could be used a new functional colorant.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.244.2-244.2
• /
• 2010

Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide into monomeric sugars. In this study, dilute sulfuric acid used as a catalyst for the pretreatment of rapeseed straw. Hydrolysis can be performed enzymatically, and with dilute or concentrate mineral acids. Dilute-acid hydrolysis of rapeseed straw was optimized through the utilization of combined severity. Evaluation criteria for optimization of the pretreatment conditions were based on high xylose recovery and low inhibitor contents in the hydrolyzates. In addition, this paper reports the compositional analysis of hydrolyzate liquors and solid residues, xylose and glucose mass balance closures, and digestibility results of the acid pretreated rapeseed straw.

• KSBB Journal
• /
• 제27권1호
• /
• pp.51-56
• /
• 2012

This research was to investigate the polyester preparation using waste ethylene glycol (EG) generated from the wastepaper pretreatment process. Waste EG was obtained from using EG five times repeatedly in the pretreatment of wastepaper. The hydroxyl value of the waste EG was 441 mg KOH/g and its composition was 0.68% cellulose, 6.5% hemicellulose, 6.1% lignin, and 86.7% EG. Maleic acid was used as carboxylic acid. The effect of reaction temperature and time except carboxyl group/hydroxyl group ratio on the crosslinkage of the prepared polyester was marginal. Citric acid, lithium hydroxide and dicumyl peroxide were used as additive or catalyst to enhance the crosslinkage of polyester. Among them, 10% of citric acid was found to be most effective. The crosslinkage was 86% when the polyester was prepared at an optimum condition such as $130^{\circ}C$ and 15 minutes, 1.5 of C/H ratio, and 10% of citric acid, and its insoluble percentage in boiling water for 6 hours was 47%. The weight loss of the prepared polyester was approximately 40% when it was buried in damp soil for 5 months, indicating that it is readily biodegradable. This results can provide some information for future development of wastepaper pretreatment by organic solvent.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.317-322
• /
• 2015

PURPOSE. The aim was to evaluate the effect of curing mode and different dentin surface pretreatment on microtensile bond strength (${\mu}TBS$) of self-adhesive resin cements. MATERIALS AND METHODS. Thirty-six extracted human permanent molars were sectioned horizontally exposing flat dentin surface. The teeth were divided into 12 groups (3 teeth/group) according to the dentin surface pretreatment methods (control, 18% EDTA, 10% Polyacrylic acid) and curing mode (self-curing vs. light-curing) of cement. After pretreatment, composite resin blocks were cemented with the following: (a) G-CEM LinkAce; (b) RelyX U200, followed by either self-curing or light-curing. After storage, the teeth were sectioned and ${\mu}TBS$ test was performed using a microtensile testing machine. The data was statistically analyzed using one-way ANOVA, Student T-test and Scheffe's post-hoc test at P<.05 level. RESULTS. For G-CEM LinkAce cement groups, polyacrylic acid pretreatment showed the highest ${\mu}TBS$ in the self-cured group. In the light-cured group, no significant improvements were observed according to the dentin surface pretreatment. There were no significant differences between curing modes. Both dentin surface pretreatment methods helped to increase the ${\mu}TBS$ of RelyX U200 resin cement significantly and degree of pretreatment effect was similar. No significant differences were found regarding curing modes except control groups. In the comparisons of two self-adhesive resin cements, all groups within the same pretreatment and curing mode were significantly different excluding self-cured control groups. CONCLUSION. Selecting RelyX U200 used in this study and application of dentin surface pretreatment with EDTA and polyacrylic acid might be recommended to enhance the bond strength of cement to dentin.