• 한국표면공학회지
• /
• 제37권2호
• /
• pp.92-98
• /
• 2004

The current efficiency and the microstructure of the trivalent Cr deposits plated in flow cell system were investigated according to additives in sulfate bath and current density. The current efficiency of the deposits plated in the formic acid complexed bath was noticeably higher than that of the deposits from glycine complexed bath. The current efficiency of the deposits from the complexed baths with boric acid buffer increased linearly with current density in the range of 60-100 A/dm$^2$, while that of the deposits from the baths with both Al sulfate and mixed buffers increased parabolically with current density. The nodular crystallite size of the deposits increased with current density, and the deposits plated in low current density region had relatively smooth surface appearance with fine grains. The structure of the deposits from the complexed baths with boric acid buffer changed from amorphous structure to crystalline one with strong (110)peak with increasing current density. The deposits from the baths with both Al sulfate and mixed buffers had generally amorphous structure.

• 한국환경과학회지
• /
• 제7권2호
• /
• pp.149-156
• /
• 1998

Enoronmental problems caused by certain geologic conditions Include pollution of soil by heavy metal, acidization of souls , acid mine drainage, Pound-water pollution, and natural radioactivity, as well as zoo-logical hazards such as landslide and subsidence. The acrid mine drainage contains large amount of heavy metals nO, therefore. cause serious pollution onto the nearby drainage systems and soils. In spite of this prospective environmental danger, few studies have been done on the acid mine drainage derived from non-metallic ore deposits such as pyrophyllitefNapseok) deposits. The sudo-bearing pyrophyllite ores, alteration zones, and mine talllngs of pyrophylllte deposits produce acrid mine drainage by the okidation of weathering. Compared to the fresh host rocks, the ores and altered rocks of pyrophyllite deposits produce acidic solution which contain higher amount of heavy metals because of OeP lower buffering capacity to acrid solution. The pus of urine water and nearby stream water of pyrophyllite deposits are 2.1~3.7, which are strong- ly acidic and much lower than that (6.2~7.2) of upstream water and than that (6.8~7.6) of the stream water derived from the non-mineralized area. This study reveals that this acrid mine drainage can affect the downstream area which is 8km far from the pyrophyllite deposits, even though the drain Is diluted with abundant non-contaminated river water This suggmists that not only acid mine drainage but also the sulfide-bearing sediments originated from the pyrophyllite deposits move downstream and form acidic water through continuous oxidation reaction. The heavy metals such as Pb, Zn, Cu, Cd, Nl, Mn and Fe are enriched In the mine water of low pH, and their contents decrease as the pH of mine water Increases because of the Influx of fresh stream wainer. SoUs of the Pyrophyulte deposits are characterized by high contents of heavy metals. The stream sediments containing the yellowish brown precipitates formed by neutralization of acid mine drainage occur in all parts of the stream derived from the pyrophyllite deposits, and the sediments also contain high amounts of heavy metals. In summary, the acid mine drainage of the pyrophyllite deposits is located in the upstream part of Hoidong water reservoir in Pusan contains large amounts of heavy metals and flows into the Holdong water reservoir without any purification process. To protect the water of Holdong reservoir, the acid mine drainage should be treated with a proper purification process.

• 한국표면공학회지
• /
• 제37권1호
• /
• pp.13-21
• /
• 2004

The deposition rate, the current efficiency and surface morphology of trivalent Cr deposits were investigated according to additives in sulfate bath and current density. The deposition rate of the Cr deposits plated from the formic acid complexed bath was noticeably higher than that of the glycine complexed bath. The current efficiency of the deposition from formic acid bath was higher than that of the glycine bath and increased with current density in the range of 20-50 A/d$\m^2$. The current efficiency of the deposition from the formic acid bath with boric acid buffer was higher than that of the bath with aluminum sulfate or boric acid-aluminum sulfate buffers. The nodular crystallite size of the Cr deposits increased with current density and the uniform and crack-free growth of the deposits for the aluminum sulfate was observed compared to the other buffers.

• 자원환경지질
• /
• 제19권spc호
• /
• pp.43-52
• /
• 1986

Kaolin-pyrophyllite are locally abundant in the three hydrothermal areas at Yangsan-Tongnae area, Hadong-Sancheong area and Haenam area, deposits are originally composed of acidic volcanic rocks and anorthositic rocks in Hadong-Sancheong area. The clay deposits are formed in the near shallow depths environment through acid hydrothermal alteration. Hadong-Sancheong halloysite deposits are formed by alteration of anorthosite. These differences are mainly on the various country rocks, geological structure and properties of hydrothermal solutions. Country rock is mostly underlain by rhyolitic tuffaceous and anorthositic rocks and a large number of clay deposits were formed during volcanic activity through upper Cretaceous-lower Tertiary. Intrusive rocks is broadly distributed in this area and clay deposits are variable in shapelayer and funnel typed. Zonal pattern of mineral assemblage is as follows, Yangsan-Tongnae deposits-kaolinite, pyrophyllite, dumortierite, andalusite and sericite, Hadong-Sancheong-mostly halloysite, and Haenam-dickite, pyrophyllite, alunite and diaspore. The difference in the zonal pattern of altered rock is considered to depend on differences in the initial acidity of related hydrothermal solution, initial acidity was controlled by the oxygen fugacity.

• 한국표면공학회지
• /
• 제24권2호
• /
• pp.103-113
• /
• 1991

Electroless Ni-Cu-P alloy plating of Al base hard disk was performed to investigate some properties according to the change of composition. It was found that the composition of Ni and Cu in deposits changed linearly with increasing the mole ratio of NiSO4.6H2O/CuSO4.5H2O. The increase in hardness by heat - treatment was confirmed to be associated with small size grained crystallization of the amorphous deposits. Acid resistance of all deposits layer. which had been heated up to 30$0^{\circ}C$, was found to be exellent when immersed in 1N-H2SO4 solution, and it showed more superior acid resistance with decreasing Cu content and with increasing P. The resistivity of the deposits heat treated became smaller at temperature more than 50$0^{\circ}C$, and it became largerly with increasing P content. Cu 44.1wt% alloy(C bath) showed the most superior non-magnetically stable characteristics after heat treatment. It was superiorly with higher temperature and with decreasing P content.

• 한국재료학회지
• /
• 제24권6호
• /
• pp.319-325
• /
• 2014

Cobalt nano-rods were fabricated using a template-free electrochemical-deposition process. The structure of cobalt electro-deposits strongly depends on the electrolyte composition and on the density of the applied current. In particular, as the content of boric acid increased in the electrolyte, deposits of semi-spherical nuclei formed, and then grew into one-dimensional nano-rods. From analysis of the electro-deposits created under the conditions of continuous and pulsed current, it is suggested that the distribution of the active species around the electrode/electrolyte interface, and their transport, might be an important factor affecting the shape of the deposits. When transport of the active species was suppressed by lowering the deposition temperature, more of the well-defined nano-rod structures were obtained. The optimal conditions for the preparation of well-defined nano-rods were determined by observing the morphologies resulting from different deposition conditions. The maximum height of the cobalt nano-rods created in this work was $1{\mu}m$ and it had a diameter of 200 nm. Structural analysis proved that the nano-rods have preferred orientations of (111).

• 자원환경지질
• /
• 제26권2호
• /
• pp.155-166
• /
• 1993

Gold contents with major and trace elements have been determined in 67 fresh igneous and altered wall rocks in the acid-sulfate alteration zone of the Ogmaesan-Seongsan pyrophyllite deposits in the Haenam area of the south-western part of Korean peninsula. The results are as follows; (1) Li contents have a tendency to show high value in dickite and altered rocks with dickite, while As, Mo and Sb contents have tendencies to show high values in alunite vein and silicified zone. F contents are higher in the altered rocks compared to fresh rocks. (2) Gold contents are enriched in alunite vein and silicified zone of the Seongsan deposit, but depleted in dickite and altered rock with dickite. Gold contents are especially concentrated in fault or conjunction area of two faults. (3) Gold contents are higher values in the mineral assemblages of alunite-quartz-pyrite and alteration zone of the Seongsan deposit among the studied deposits. (4) Gold contents in samples of silicified zones tend to show positive correlations with Ag, As, Co, Hg, Sb and V content, but negative correlations with Y and Zr contents, while on the other gold contents of silicified tuffs tend to show positive correlations with Hg and Sb contents. Therefore it is important to survey alunite vein and silicified zone at the conjunction of faults, and to analyze pathfinder elements such as Ag, As, Hg and Sb for geological and geochemical exploration of gold in the studied deposits.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2918-2925
• /
• 2021

The efficiency of decontamination of model spent ion exchange resins, contaminated with magnetite and hematite, with mineral acid solutions, and using electro-decontamination, was evaluated. It has been shown that effective hematite dissolution occurs in concentrated mineral acid solutions. However, the use of direct current increases the decontamination efficiency of spent ion exchange resins contaminated with hematite. It is determined that with increasing voltage and acid concentration, the dissolution efficiency of hematite deposits increases and can exceed 99%. It has been shown that hematite dissolution is accompanied by secondary adsorption of radionuclides due to ion exchange, which can be removed with sodium nitrate solutions.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.21-30
• /
• 2023

This work presents a correlation between the behavior of formic acid oxidation (FAO) on various Bi-modified Pt(poly) disk electrodes and their morphologies observed on Bi-modified Pt(111) disk electrodes using electrochemical scanning tunneling microscopy (EC-STM) to understand the effects of Bi on Pt. To distinguish the FAO activities of Bi on Pt and plain Pt around Bi, additional Pt was intentionally deposited using two different routes: direct route and iodine route. In direct route, Pt was directly deposited on Bi islands and plain Pt sites around Bi islands, while in iodine route, Pt was exclusively deposited on Bi islands by protecting plain Pt sites with adsorbed iodine. Thus, a comparison of FAO performances on the two Bi-modified Pt electrodes with additional Pt (deposited in the different ways) disclosed a difference in FAO performances on plain Pt sites and Bi islands. When Bi coverage was ~0.04, the Bi deposits were scattered Bi islands enhancing FAO on Pt(poly). The additional Pt deposits using direct route increased FAO efficiency, while the ones using iodine route slightly decreased FAO current. The EC-STM observations indicated that Pt deposits around Bi islands, not on Bi islands, were responsible for the FAO current increase on Bi-modified Pt(poly). The FAO efficiency on Bi-modified Pt(poly) with a Bi coverage of ~0.25 increased by a factor of 2. However, the additional Pt deposits using the two Pt deposition routes notably decreased the FAO current. The dependency of FAO on Bi coverage was discussed in terms of electronic effect and ensemble effect.

• 자원환경지질
• /
• 제37권1호
• /
• pp.1-19
• /
• 2004

국내 금속광상의 성인적 유형은 주로 열수충진형 광상, 스카른형 광상, 열수교대형 광상 및 변성퇴적형 광상으로 배태되고 이외에 일부는 정마그마형 광상, 반암형 광상, 알라스카이트형 광상 등으로 부존되고 있다. 이러한 폐광산으로부터 발생되는 수질 및 토양의 환경문제는 개발규모 및 수반금속, 주변암상과 관련된 부존특성과 함께 열수변질작용과 관련된 광물조합, 광석-맥석 광물의 조직, 유형 및 양적관계, 풍화의 진행단계와 관련된 이차-삼차광물의 존재형태 등의 광물-지화학적 특성에 좌우되고 있다. 1970년대 초반부터 1990년대 후반에 걸쳐 광산개발이 종료된 국내금속광상은 폐광 이후의 경과기간에 따라 황화-황염광물과 같은 일차광물로부터 용해되어 수산화광물, 황산염광물, 탄산염광물로 변화하는 과정에서 산화-용출-침전-재용출-이동에 의한 다단계의 복잡한 지화학적 반응관계를 보이고 있다. 금속광상의 산성 배수 및 중금속오염은 다금속 광화작용과 관련된 비철금속 광상과 동시에 맥상광상 및 각력파이프형 광상과 백악기금광상에서 가장 높은 용출가능성을 보이는 반면, 스카른형 광상, 열수교대형 광상, 정마그마형 광상, 맥상 금-은광상, 맥상 동광상 및 변성퇴적형 광상에서 오염가능성은 매우 낮은 경향을 보이고 있다. 이와 같이 광상 유형과 관련된 지질부존 특성은 폐석 및 광미를 구성하는 황화광물 및 탄산염광물의 유형 및 양비와 밀접한 연관성을 갖고 있으며, 산성 배수에 함유된 금속원소종의 유형 및 용출량과 같은 지화학적 특성에 직접적으로 영향을 미치고 있다.