• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.2
• /
• pp.149-157
• /
• 2018

In this study, we investigated the changes in physicochemical properties, antioxidant activities, and contents of functional compounds, such as avenanthramides (AVNs), vitamin E, and ${\beta}$-glucan, in oats by accelerated age-conditioning (temperature: $45^{\circ}C$, relative humidity: 20%). No significant differences were observed in crude protein, crude fat, and AVNs contents of three oat cultivars, up to 63 days of storage; however, their antioxidant activities, as well as ${\beta}$-glucan, vitamin E, and fatty acid contents were significantly different (p < 0.05). ${\beta}$-glucan and fatty acid contents and the antioxidant activities of Deayang (DY) cultivar did not change during storage. ${\beta}$-glucan and unsaturated fatty acid contents of Choyang (CY) and Jopung (JP) increased during the storage period, while antioxidant activities did not (DPPH-CY; 48.1 to 26.9 mg TEAC/100 g, JP; 49.4 to 26.7 mg TEAC/100 g. ABTS-CY; 88.4 to 56.3 mg TEAC/100 g, JP; 80.0 to 55.8 mg TEAC/100 g). The total vitamin E content in DY (1.20 to 0.85 mg/100 g) and CY (1.73 to 1.33 mg/100 g) decreased, but it was maintained in JP. This study indicated that the changes in physicochemical properties and functional compounds of oat grains during storage depends on the cultivars. The result showed that DY, which has the highest AVNs content, has more stable functional compounds and antioxidant activities during storage. These results can serve as essential data for post-harvest management and development of functional food materials for extending the use of oats.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.397-404
• /
• 2021

The purpose of this study was to evaluate the effect of a hemostatic agent containing aluminum chloride on the shear bond strength of resin-modified glass ionomer cement (RMGIC) to the dentin of primary teeth. Thirty-six extracted non-carious human primary teeth were collected in this study. Dentin surfaces were cut and polished. The specimens were randomly divided into 4 groups; group I: RMGIC without conditioning; group II: polyacrylic acid (PAA), RMGIC; group III: aluminum chloride, RMGIC; group IV: aluminum chloride, PAA, RMGIC. All teeth were thermocycled between 5.0℃ and 55.0℃ for 5000 cycles. Fifteen specimens from each group were subjected to shear bond strength test and 3 specimens from each group were inspected using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy. The mean shear bond strength of each group was as follows: 4.04 ± 0.88 MPa in group I, 8.29 ± 1.40 MPa in group II, 1.39 ± 0.47 MPa in group III, 6.24 ± 2.76 MPa in group IV. There were significant differences among all groups (p < 0.001). SEM image of the dentinal tubules were partially exposed in group III and group IV. Fully exposed dentinal tubules were found in group II. In conclusion, aluminum chloride decreased the shear bond strength of RMGIC to dentin, regardless of PAA conditioning.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.298-302
• /
• 2016

This study evaluated the effect 3 types of conditioning (Untreated, Impeller, Roller) and the number of times for tedding (rake-teder) performed in one day on the drying rate of tall fescure hay. The experiment was performed at The forage site of Cheonan-si seongwhan-eup National Institute of Animal Sciencee. It took 3 days to make tall fescue hay. The Impeller and Roller conditioning types shortened the haymaking period by 1 day compared to untreated hay. Impeller and roller samples had less than 20% of water content by the $23^{rd}-day$ at 13 o'clock. Tedding frequency failed to affect haymaking. There was no correlation between the three types of conditioning or tedding frequency and acid digestible fiber (ADF), neutral detergent fiber (NDF), total digestible nutrients (TDF), crude protein (CP), or relative feed value (RFV) in tall fescue hay. CP was 12.5~12.9% for the three types of conditioner with 1 or 2 times of tedding a day, Threrfore, conditioner types and gedding frequency had no significant effect on CP.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.601-610
• /
• 2003

Biotin is a water-soluble vitamin used as a skin conditioning agent and promotes the formation of intercellular lipid layers through increased lipid synthesis, which improves the skin's natural barrier function. The anti-inflammatory effects of biotin have been investigated using in vitro assay models, such as MTT assay, measurements of concentrations of nitric oxide(NO), prostaglandin E2(PGE$_2$), and inhibition rate of 5-lipoxygenase(5-LOX). In comparison with biotin, other plant extracts were tested at the same time which were kudzu vine extract, sage extract, paeonia extract, and dipotassium glycyrrhetinate. Nitric oxide is a signal molecule with functions such as neurotransmission, local vascular relaxation, and anti-inflammation in many physiological and pathological processes. NO can cause apoptosis and necrosis of target cells such as keratinocytes and is generated from L-arginine by nitric oxide synthase (NOS). Prostanoids, including prostaglandins and thromboxanes, are generated by the phospholipase $A_2$/cyclooxygenase(COX) pathway, and leukotrienes are generated by the 5-lipoxygenase pathway from arachidonic acid. Prostaglandin E2 recently have been shown to be beneficial in the resolution of tissue injury and inflammation, also has been implicated as an immunosuppressive agent and plasma levels of PGE$_2$ are elevated in patients sustaining thermal injury. Lipoxygenase metabolites from arachidonic acid have been implicated in inflammation, anti-inflammatory activity of the raw materials was evaluated in vitro by the offered inhibition of lipoxygenase.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.508-514
• /
• 2010

This study was conducted to evaluate the effects of dietary arachidonic acid (AA, 20:4n-6) levels on growth performance and body composition in juvenile eel, Anguilla japonica. Six semi-purified experimental diets were formulated to be isonitrogenous and iso-caloric containing 55.0% crude protein and 15% crude lipid (18.3 kJ of available energy $g^{-1}$). Six different levels of AA were added to the basal diet, with 0, 0.2, 0.4, 0.6, 0.8 or 1.2% on a dry matter (DM) basis, respectively ($AA_{0.07},\;AA_{0.22},\;AA_{0.43},\;AA_{0.57},\;AA_{0.78}\;or\;AA_{1.23}$). After a conditioning period, fish initially averaging 27${\pm}$0.5 g (mean${\pm}$SD) were randomly distributed into each aquarium as triplicate groups of 20 fish each. One of six experimental diets was fed on a DM basis to fish in three randomly selected aquaria at a rate of 2-3% of total body weight twice a day. At the end of the 12-week feeding trial, weight gain (WG) and feed efficiency (FE) of fish fed $AA_{0.78}$ and $AA_{1.23}$ diets were significantly higher than of fish fed $AA_{0.07},\;AA_{0.22},\;AA_{0.43}$ diets (p<0.05). Specific growth rate (SGR) of fish fed the $AA_{0.78}$ diet was significantly higher than of fish fed $AA_{0.07},\;AA_{0.22},\;AA_{0.43}$ diets (p<0.05). However, there were no significant differences in WG, SGR and FE among fish fed $AA_{0.57},\;AA_{0.78}\;or\;AA_{1.23}$ diets (p>0.05). Whole body AA deposition of fish fed the $AA_{1.23}$ diet was significantly higher than for the other diets (p<0.05). Broken-line model analysis on the basis of WG and SGR indicated that the dietary AA requirement could be greater than 0.69% but less than 0.71% of the diet in juvenile eel. The growth-promoting activity of AA observed in the present study provides strong support for the contention that dietary AA is essential for juvenile eel.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.419-430
• /
• 2007

Purpose: This in vitro study evaluated shear bond strengths of surface treatment porcelains with four porcelain repair systems simulating intraoral bonding of composite resin to feldspathic porcelain or pressable porcelain. Material and methods: Eighty Porcelain disks were prepared. Group A: forty disk specimens were fabricated with Feldspathic Porcelain($Omega^{(R)}900$, Vident, Menlo Park, CA, USA). Group B: forty disk specimens were fabricated with Pressable Porcelain(IPS Empress 2 ingot, Ivoclar-Vivadent, Schaan, Liechtenstein, Germany). Each groups was divided into 4 subgroups and composite resin cylinders were bonded to specimen with one of the following four systems: Clearfil Porcelain Bond(L. Morita, Tustin, CA, USA), Ulradent Porcelain Etch. (Ultradent, Salt Lake City UT, USA), Porcelain Liner-M(Sun Medical Co., Kyoto, Japan), Cimara Kit(Voco, Germany). After surface conditioning with one of the four porcelain repair systems substrate surfaces of the specimen were examined microscopically(SEM). Shear bond strengths of specimens for each subgroup were determined with a universal testing machine (5mm/min crosshead speed) after storing them in distilled water at $37{\pm}1^{\circ}C$ for 24 hours. Stress at failure was measured in $MP_a$, and mode of failure was recorded. Differences among four repair systems were analyzed with two way ANOVA and Duncan test at the 95% significance level. Results: In the scanning electron photomicrograph of the treated porcelain surface, hydrofluoric acid etched group appeared the highest roughness. The shear bond strength of the phosphoric acid etched group was not significantly(p>0.05) different between feldspathic porcelain and pressable porcelain. But in no treatment and roughened with a bur group, the shear bond strength of the feldspathic porcelain was significantly higher than that of the pressable porcelain. In hydrofluoric acid etched group, the shear bond strength of the pressable porcelain was significantly higher(p<0.05). Conclusion: 1. Treatment groups showed significantly greater shear bond strengths than no treatment group(p<0.05). 2. Group with more roughened porcelain surface did not always show higher shear bond strengths. 3. In phosphoric acid etched group, there was no significant difference in shear bond strength between feldspathic porcelain and pressable porcelain(p>0.05). However in the other groups, there were significant differences in shear bond strengths between feldspathic porcelain and pressable porcelain(p<0.05).

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.223-233
• /
• 1995

The purpose of this study was to evaluate the effects of surface conditioning with $10\%$ polyacrylic acid, etching with $38\%$ phosphoric acid, and polishing with a slurry of pumice on shear bond strengths of light-cured glass ionomer cement, chemically cured glass ionomer cement, and a composite resin to enamel, and to observe the failure patterns of bracket bondings. Shear bond strengths of glass ionomer cements were compared with that of a composite resin. Metal brackets were bonded on the extracted human bicuspids after enamel surface treatments, and samples were immersed in the $37^{\circ}C$ distilled water bath, and shear bond strengths of glass ionomer cements and a composite resin were measured on the Instron machine after 24hrs passed, and the deboned samples were measured in respect of adhesive remnant index. Scanning electron micrographs were taken of enamel surfaces after various treatments. The data were evaluated and tested by ANOVA and Duncan's multiple range test, and those results were as follows. 1. Shear bond strength of light-cured glass ionomer cement showed statistically higher than that of chemically cured glass ionomer cement. 2. Shear bond strengths of light-cured and chemically cured glass ionomer cements to enamel treated with $10\%$ polyacrylic acid and $38\%$ phosphoric acid showed statistically higher than those with a slurry of pumice. 3. According to scanning electron micrographs, enamel surface conditioned with $10\%$ polyacrylic acid is slightly etched and cleaned, that etched with $38\%$ phosphoric acid is severely etched, and that polished with a slurry of pumice is irregulary scretched and not completely cleaned. 4. After debonding, light-cured glass ionomer cement to enamel treated with $10\%$ polyacrylic acid showed less residual materials on the enamel solace than composite resin to enamel etched with $38\%$ phosphoric acid. 5. There was no significant difference in the shear bond strength of light-cured glass ionomer cement to enamel treated with $10\%$ polyacrylic acid and that of composite resin to enamel etched with $38\%$ Phosphoric acid.

• Journal of the Korean Chemical Society
• /
• v.45 no.4
• /
• pp.334-340
• /
• 2001

The water soluble carboxymethyl-chitin (CM-chitin) has been well known to be very useful to the cosmetic field as a moisturizer, a smoothener, a cell activater and a cleaner for face skin conditioning. In this study, the preparation process of CM-chitin was simplified with elimination of some procedures in the conventional method. The chitin powder was mixed with sodium hydroxide solution. And then a mixture of sodium monochloroacetate (or monochloroacetic acid) and isopropyl alcohol (or a mixed solution with water and isopropyl alcohol) was added to thorough the agitation and the freezing during 16 hours. The CM-chitin with a high degree of substitution by the improved process was obtained.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.4
• /
• pp.17-24
• /
• 2003

Chemical mechanical polishing(CMP) has been applied for planarization of topography after patterning process in semiconductor fabrication process. Tungsten CMP is necessary to build up interconnects of semiconductor device. But the tungsten dishing and the oxide erosion defects appear at end-point during tungsten CMP. It has been known that the generation of dishing and erosion is based on the over-polishing time, which is determined by pattern selectivity. Fixed abrasive pad takes advantage of decreasing the defects resulting flam reducing pattern selectivity because of the lower abrasive concentration. The manufacturing technique of fixed abrasive pad using hydrophilic polymers is introduced in this paper. For application to tungsten CMP, chemicals composed of oxidizer, catalyst, and acid were developed. In comparison of the general pad and slurry for tungsten CMP, the fixed abrasive pad and the chemicals resulted in appropriate performance in point of removal rate, uniformity, material selectivity and roughness.

• 보존과학연구
• /
• s.24
• /
• pp.169-184
• /
• 2003

Yearly mean temperature and relative-humidity of the Seokguram Grotto was measured $19~23^{\circ}C$, 40~44% from May, 1998 to December,2002. The measurement has little differences comparing to the optimum guideline (temperature : $20^{\circ}\pm2^{\circ}C$, relative-humidity : $50^{\circ}\pm5%$). It is necessary to increase humidity in the Seokguram Grotto during winter because of heating and decrease the temperature during summer because of a higher temperature of outside. In addition, the diurnal range keep in $4^{\circ}C$ of temperature and in 10% of relative-humidity. Yearly mean concentration of $CO_2$(carbon dioxide) was measured538~658ppm that is higher than concentration of normal atmosphere(360 ppm). The $CO_2$ has an cumulative effect on the surface of stone cultural properties as a form of carbonic acid($H_2CO_3$) after reaction with water. HVAC (Heating, Ventilation and Air Conditioning) system should be operated to maintain ideal state for the preservation according to the optimum guideline. Also, the entrance into the Seokguram Grotto should be controlled to prevent a sudden fluctuation of humidity and temperature. Human could carry small particles like a microdust, microbe, etc., into the Seokguram Grotto and also could damage the surface by a direct touch.