• Journal of Fashion Business
• /
• v.9 no.5
• /
• pp.122-135
• /
• 2005

It has been reported that natural dyeing is impossible without pre-treatment with metal mordanting agents. However, pre-treatment with chitosan, which has high affinity to natural dyes, could result in an excellent dyeing with various natural dyes. In this study, three treatment methods were employed; 1) Using PET without any pre-treatment (Method 1) 2) Using PET with chitosan acid solution pre-treatment (Method 2) 3) Using PET with chitosan pre-treatment and subsequent crosslinking using citric acid (Method 3) Method 2 and 3 enhanced the Cochineal dyeability remarkably compared to Mehod 1. Washfastness was also enhanced, and moisture content, static property, abrasion resistance, and fabric hand changes were investigated.

• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.109-114
• /
• 1975

Domestic seaweeds Gracilaria verrucosa collected from coastal areas of Namhae, Wando and Yeosoo, Korea were subjected to the examination of yield and quality of agar prepared according to various pretreatment conditions. In alkali treatment at high temperature, higher alkali concentration for one-hour period at $90^{\circ}C$ gave rise to higher yield of agar. In acid treatment, higher yield was obtained by higher acid concentration and longer treating period. Alkali treatment at room temperature gave rise to a slightly decreased yield at higher alkali concentration and longer treating time. Total nitrogen and crude ash of agar samples were greatly decreased by pretreatments. Jelly strength, gelation ability, gelation point and viscosity of agar samples tended to increase as the alkali-treating condition of seaweed became stronger. It was shown that sulfur content of agar had a high negative correlation with jelly strength of its gel. Various alkali treatments of seaweed at room temperature showed no marked difference in agar quality and did not exhibit any good effect comparable to alkali treatment at high temperature.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.1 no.1
• /
• pp.31-37
• /
• 1977

The effects of surfactants and concentration of NaOH in surfactant solution on the removal of free fatty acid soil from cotton fabrics were investigated. Cotton fabrics were soiled with palm itic acid which is the most common fatty acid found in natural oily soil and washed in Lauder-ometer with various types of surfactant with or without NaOH. The rate of soil removal was estimated by analyzing palmitic acid contents in fabric before ar d after washing. Analysis of palmitic contents was made by extracting palmitic acid with azeotropic mixture of alcohol-benzene and the extracts were titrated with standard NaOH solution. It was shown that the types of surfactant are important factor in free fatty acid removal and the efficiency increases in the following order: SLS$90\%$ of initial sorption. In relation to the mechanism of detergency, the suspending and emulsifying power of surfactants were also examined. From the results of this experiments, it could be concluded that the soap formation with alkali and the suspending power of surfactant arc significant factors in free fatty acid soil removal, but the emulsifying power of it is neglizible.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.3
• /
• pp.59-64
• /
• 2016

Applications of electrolytic ion water generated by the oxidation-reduction have gradually been expanded due to their strong sterilizing power and a surface active force. We demonstrate the effect of the multi-layer type electrode for effective ion water generation. The multi-layer type electrode has ability to generate stronger acid and alkali water by increase of the electrode reactive area. Also power consumption efficiency enhances because the electrodes disposed in middle position of the reactive cell raise the usage rate by overlapped effect as an electrolysis electrode.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.79-85
• /
• 2012

In this study, purified cellulose was prepared from rice husk which is one of the major agricultural residues in Korea. The various bleaching processes such as ozone bleaching, $ClO_2$ bleaching and $H_2O_2$ bleaching were applied to remove residual lignin and impurities. In order to increase the contents of ${\alpha}$-cellulose contents, the effects of acid and alkali treatments were evaluated. Although the multi stages of the bleaching processes resulted in less than 0.5 % residual lignin contents, the application of ozone leaded to the decrease in DP(degree in Polymerization) and ${\alpha}$-cellulose contents. The alkali treatment after bleaching processes resulted in pure cellulose which showed more than 98% of ${\alpha}$-cellulose contents.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.4
• /
• pp.1798-1802
• /
• 1969

The experiment was carried out as one of the basic studies to improve the alkali-resistance of cement mortars and it was conducted to investigate some propetties of mortars relating to weight losses when exposed to 0.1 N salution of sodium hydroxide. The experiment and the results obtained are summarized as follow; 1. The specimens used in this experiment were made of 5 centi-meter cubes of mortar having such various ratios of mix by weight as 1 : 1, 1 : 3, 1 : 5, 1 : 7 and 1 : 10. 2. Physical tests included compressive strengths at 7 days, 28 days, 3 months, and 6 month, and 5 hour boiling absorption test. 3. In alkali test, every specimen was immersed into 0.1 N solutions of sodium hydroxide. The specimens exposed to the alkali solution were weighed to determine the weight losses of the alkail-corroded at one week interval for 7 week's exposure and the old alkali solutions were also changed to fresh solutions when weighed the weight losses by alkali attack at one week interval. 4. According to the alkail test after 7 week's exposure, no weight losses were observed on ratios of mix 1:1 and 1:3 and slight weight losses occurred on ratios of mix 1:5 and 1:7, but relatively large amount of weight losses were showed by 36.6 per-cent on ratios of mix 1:10. It was also found that the weight losses of the alkali-corroded were extremely lower than those of the acid-corroded at the some concentrations as 0.1 N of solutions. 5. In order to make better quality of alkali-resistant mortar it might recomend that a 1:7 mix or richemixes, use of small amount of mixing water for watertight, 20 per cent or less absorption by 5 hour boiling 1,600 kirogram per cubic meters or denser densities by absolute dry base are available for physical properties of mortar. It could conclude acid-resistant mortars were so high alkali-resistant, that it is expected to make and improve the acid-resistant mortars for getting rid of damages by alkali attack.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.416-420
• /
• 2002

Various products of karanj (Pongamia glabra) are utilized for industrial, health and animal agriculture applications in the Indian subcontinent. Despite a rich source of protein (CP, 28-34%), karanj cake was found to be slightly bitter in taste and toxic owing to the presence of flavonoid (Karanjin), restricting its safe inclusion in the livestock diets. Feeding trials with raw cake revealed its poor palatability and adverse performance among different categories of livestock including poultry. The present study was, therefore, aimed to detoxify karanj cake by various physico-chemical methods like solvent extraction, water washing, pressure cooking and alkali and acid treatments. The level of residual karanjin in raw and variously processed cake was quantified using high performance liquid chromatography (HPLC). The raw expeller karanj cake was found to contain about 0.19% of karanjin. Though a non-polar solvent, soxhlet extraction of expeller pressed cake with petroleum ether drastically reduced karanjin content (0.01%). Soaking of cake for 24 h in 1% NaOH (w/w) solution was found to reduce karanjin to a major extent with little further benefit by increasing alkali level. Milder alkalies like lime and fertilizer grade urea reduced the karanjin levels marginally. Similar was the case with mineral acids such as HCl and glacial acetic acid. It was, therefore, concluded that solvent extraction of karanj seeds would be the best method of detoxification as well as for more recovery of oil and karanjin.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.3 no.1
• /
• pp.33-46
• /
• 2001

The purpose of this study was to investigate the natural dyeability of silk on extract of Artemisia princeps, The experimental items were divided into the mordanting method. comonent of fabric, kind of mordant. The experimental study was done by laundering fastness, abrasion(dry/wet) fastness, perspiration(acid/alkali) fastness, light fastness test and color difference by C.C.M system. The summarized finding resulted from experiments and investigation are suggested as follows; First, in the C. C. M test on mordanting methods, color difference was significantly improved when mordants were treatmented. And the premordanting method showed the highest color difference, color was most yellow-greenish, Second, in the C.C.M test on component of fabrics, color difference of silk was higher than cotton. It is considered that silk has -$NH_2$ , -COOH, -OH than more than cotton. Third, in dyeing-fastness on mordants, laundering fastness showed that color-change was 2~3 grade, the contamination on attached fabric was 4~5 grade. perspiration fastness(acid/alkali) showed 4~5 grade nearly and those of acid was higher than alkali. abrasion fastness(dry/wet) was 4~5 grade and in Fe(3~4 grade) was lower than the other mordants. Forth, in color difference analysis on mordants, Fe(50.0) showed the highest and the order of color difference was alum(16.0), Cu(7.2), Sn(3.5), Al(3.1), Cr(2.3), The Hue was turned into yellow-greenish in alum mordant treatment, the luminocity of color was most dark in Fe(-48.9) and Cu(-7.2), chroma was the highest in alum (15.7) method.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1333-1338
• /
• 2014

LDHs(layered double hydroxides) are of use adsorbent to remove heavy metals, micro-organic pollutants as well as high concentration of phosphorus from wastewater to low concentration of surface water without pH adjustments. This study examined the generation condition of LDHs saturated with phosphorus. Less than 20% regeneration rate was obtained in the absence of alkali and regeneration solution. After the desorption of LDHs with several conditions of acid and alkali solution, more than 60% of regeneration rate could be expected in the case of using $MgCl_2$ as regeneration solution.

• YAKHAK HOEJI
• /
• v.16 no.1
• /
• pp.47-54
• /
• 1972

O,O-Dimethyl-S-(phthalimido)methylphosphorodithioate (PMP) is changed into phosphine, phosphate, and phosphorothioate, when it is treated with metallic zinc in acidic medium after alkaline hydrolysis. The amount of phosphine evolved is about five times as much in sulfuric acid medium as it is in hydrochloric acid. When one micro mole of hydrolyzed PMP is treated with 8 grams of metallic zinc and 30 ml of 10 N-sulfuric acid, it is changed into 0.42 micro moles of phosphine, 0.14 micro moles of phosphorothioate, and 0.44 micro moles of phosphate.