• 제목/요약/키워드: Acid Blue-80 dye

검색결과 11건 처리시간 0.021초

견/합성섬유 혼방품의 일욕염색(IV) - 산성염료/분산염료 염욕에서의 견/아세테이트의 염착거동 - (One Bath Dyeing of Silk/Synthetic Fibre Blends(IV) - Adsorption Behavior of Acid Dyes/Disperse Dyes on Silk/Acetate -)

  • 박미라;전재홍;강영의;김공주
    • 한국염색가공학회지
    • /
    • 제6권1호
    • /
    • pp.8-18
    • /
    • 1994
  • In one bath dyeing system of silk/cellulose acetate fiber blend fabric with acid /disperse dyes, adsorption behavior of acid dyes and disperse dyes on silk and cellulose acetate fabrics were examined. In the dyeing of cellulose acetate with C. I. Disperse Red 19(Red 19) and C. I. Disperse Red 60(Red 60) at 8$0^{\circ}C$ and 10$0^{\circ}C$, dye uptake with Red 19 was higher than that with Red 60. When the silk/cellulose acetate dyed with Red 19 and Red 60 at 10$0^{\circ}C$, dye uptake on cellulose acetate was influenced by affinity of the dye to the silk fabric dyed together. When the silk/cellulose acetate dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$, color of cellulose acetate dyed with Red 19 and Red 60 was not influenced by Blue 80 but silk dyed with Blue 80 was influenced by Red 19 and Red 60. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.

  • PDF

MECC법과 Ion-Pairing 크로마토그래피법을 이용한 염료성분의 분석 (Analysis of dye components using MECC and ion-pairing chromatography)

  • 정혁
    • 분석과학
    • /
    • 제19권1호
    • /
    • pp.31-38
    • /
    • 2006
  • Ion-Paring을 이용한 고성능 액체 크로마토그래피법과 계면활성제를 완충용액에 섞어서 사용하는 미셀 모세관 전기영동법(micellar electrokinetic capillary chromatography, MECC)을 이용하여 아조염료의 합성성분이면서 동시에 독성을 나타내는 분해물인 H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid 그리고 2-naphthylamine-1,5-disulfonic acid 등의 디아조 성분에 대하여 분석을 수행하였다. 같은 방법으로 Acid Orange 7, Acid Orange 5, Acid Blue 92 등의 산성염료와 Direct Red 80 등의 직접염료와 같은 반응성 염료 및 Calcion에 대한 분리를 시도한 결과 모든 염료에 대한 완전한 분리를 얻었으며, 특히 각 염료의 환원용액을 H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid 혹은 2-naphthylamine-1,5-disulfonic acid 등의 표준물질과 비교 분석한 결과 사용한 각 염료의 디아조 혹은 커플링 성분을 완벽하게 분석할 수 있음을 알 수 있었고, 따라서 Ion-Pair 크로마토그래피법과 모세관 전기영동법은 미지의 염료에 대한 성분확인 및 디아조 혹은 커플링 성분분석에 응용할 수 있음을 보였다.

견/합성섬유 혼방품의 일욕염색(III) ―산성염료/분산염료 염욕에서의 견/PET의 염착거동― (On Bath Dyeing of silk/synthetic Fibre Blends(III) ―Adsorption Behavior of Acid Dyes/Disperse Dyes on Silk/PET―)

  • Gwag, In Jun;Yoon, Kyung Sup;Kim, Ae Soon;Kim, Gong Ju
    • 한국염색가공학회지
    • /
    • 제5권4호
    • /
    • pp.67-78
    • /
    • 1993
  • In one bath dyeing system of silk/PET fiber blend fabric with acid/disperse dyes, adsorption behavior of disperse dyes and acid dyes on silk and PET fabrics were examined. In the dyeing of PET with C.I.Disperse Red 19(Red 19) and C.I.Disperse Red 60(Red 60) at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake with Red 60 was higher than that with Red 19. When the silk/PET dyed with Red 19 and Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake on PET was influenced by affinity of the dye to the silk fabric dyed together. When the silk/PET dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$ for 60 minutes, color of PET dyed with Red 19 and Red 60 was little influenced by Blue 80 but silk dyed with Blue 80 was influenced. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.

  • PDF

견/합성섬유 혼방품의 일욕염색 (V) -견/나일론 혼방품의 일욕염색- (One Bath Dyeing of Silk/Synthetic Fiber Blends (V))

  • 이재덕;전재홍;김공주
    • 한국염색가공학회지
    • /
    • 제6권3호
    • /
    • pp.67-73
    • /
    • 1994
  • The adsorption behaviors of acid dye and disperse dye on silk and nylon fabrics were examined, in one bath dyeing system on silk/nylon blend fabric with disperse dyes and acid dyes. In the dyeing of nylon fabric with C. I. Disperse Red 19 (Red 19) and C. I. Disperse Red 60 (Red 60), dye uptake of Red 19 was higher than that of Red 60. When silk/nylon blend fabric was dyed with Red 19 and Red 0, the dye uptake on nylon was influenced by the ffinity of the dye to the silk fabric. In the dyeing of silk/nylon with C. I. Acid Blue 80 and C. I. Acid Yellow 121, solid shade could not be obtained with the conventional method but could be obtained with the dyeing resist agent for nylon. There was not any relationship between K/S value and Munsell value, but Munsell value tended to change with the K/S value.

  • PDF

활성탄에 의한 Acid Blue 40 흡착에 있어서 평형, 동력학 및 열역학적 특성 (Characteristics of Equilibrium, Kinetic and Thermodynamic for Adsorption of Acid Blue 40 by Activated Carbon)

  • 이종집
    • 한국산학기술학회논문지
    • /
    • 제19권12호
    • /
    • pp.592-599
    • /
    • 2018
  • 활성탄에 의해 수용액으로부터 acid blue 40을 흡착하는 과정을 통해 흡착평형, 동력학 및 열역학적 특성을 활성탄 양, pH, 온도, 접촉시간, 초기농도를 함수로 해서 알아내고자 하였다. 활성탄에 대한 acid blue 40의 흡착에 대한 pH별 흡착특성은 Sulfonate ion($SO_3{^-}$)과 amine ion($NH_2{^+}$)의 존재 때문에 pH 3과 pH 11에서 흡착률이 높아지는 욕조현상을 나타내었다. 활성탄에 대한 Acid Blue 40의 흡착평형관계를 흡착등온식에 적용해본 결과 Langmuir 식이 Freundlich 식과 Temkin 식보다 더 잘 맞는 것으로 나타났다. Langmuir 식과 Freundlich 식의 분리계수로 부터 활성탄에 의한 Acid Blue 40의 흡착처리가 유효한 흡착공정이 될 수 있음을 알았다. Temkin 식에 의해 구한 흡착에너지 값으로부터 흡착공정이 물리흡착공정이라는 것을 알았다. 활성탄에 대한 acid blue 40의 흡착공정에 대한 동력학적 해석을 통해 반응속도식의 적용결과는 유사이차반응속도식이 유사일차반응속도식에 비해 일치도가 높은 것으로 나타났다. 평가된 활성화 에너지 값은 42.308 kJ/mol이었으며, 엔탈피변화는 80.088 J/mol로 흡열반응의 특성을 가지는 것으로 판단되었다. 또한 자유에너지변화가 -0.0553~-5.5855 kJ/mol로 온도가 올라갈수록 흡착공정의 자발성이 더 높아진다는 것을 알았다.

나일론 시트와 염료를 이용한 고감도 색변환 포름알데히드 가스 센서 (Highly Sensitive Colorimetric Formaldehyde Gas Sensors using Nylon Sheet and Dye)

  • 정승화;조영범;김용신
    • 센서학회지
    • /
    • 제26권6호
    • /
    • pp.420-426
    • /
    • 2017
  • A colorimetric sensor was investigated to achieve a low-cost warning device for harmful gaseous formaldehyde (HCHO). The sensor is based on selective reactions between hydroxylamine sulfate and HCHO, leading to the production of sulfuric acid. The produced acid results in color-changing response through the acid-base reaction with dye molecules impregnated on a solid membrane substrate. For attaining this purpose, sensors were fabricated by drop-casting a dye solution prepared using different pH indicators on various commercially available polymer sheets, and their colorimetric responses were evaluated in terms of sensitivity and reliability. The colorimetric sensor using bromophenol blue (BPB) and nylon sheet was found to exhibit the best performance in HCHO detection. An initial bluish green of a sensor was changed to yellow when exposed to gaseous formaldehyde. The color change was recorded using an office scanner and further analyzed in term of RGB distance for quantifying sensor's response at different HCHO(g) concentrations. It exhibited a recognizable colorimetric response even at 50 ppb, being lower than WHO's standard of 80 ppb. In addition, the sensor was found to have quite good selectivity in HCHO detection under the presence of common volatile organic compounds such as ethanol, toluene, and hexane.

쪽잎 추출 산가수분해 인디고의 특성 (Characteristics of Acid Hydrolysis Indigo Extracted from Indigo(Polygonum tinctorium L.) Leaves)

  • 고인희;최태호
    • 펄프종이기술
    • /
    • 제48권3호
    • /
    • pp.57-65
    • /
    • 2016
  • Indigo (Polygonum tinctorium L.) is a typical blue dye which had been used from ancient times. This study was going to shade the complicated traditional methods extracting indigo dye by the fermentation and producing as adsorbate on calcium hydroxide, which says so called as the 'Indigo lime'. Accordingly we were going to make indigo through the hydrolysis of the hot water extractives of indigo leaves simply. During hot-water extraction, ${\beta}$-glucosidase which required hydrolysis of the linkage between indigo and glucose was not activated. To achieve this goal, indican was acid-hydrolyzed to glucose and indigo. The acetic acid, citric acid, hydrochloric acid, and sulfuric acid were used for the hydrolysis of hot water extractives. The hydrolysis conditions of extractives performed in water bath at $80^{\circ}C$ for 120 minutes and in an autoclave for 120 minutes. In the acid hydrolysis of extracted indican by hot water, the indican yields of acetic acid and hydrochloric acid hydrolysis were higher than sulfuric acid in water bath. Also, the indican yield of hydrochloric acid hydrolysis was better than sulfuric acid in autoclave. The hot water extracted indican was confirmed by HPLC analysis and its structure was confirmed by UV-Vis and FT-IR spectroscopy, compared with isolated indigo and commercial synthesized indigo. This improved extraction and hydrolysis methods can be replace the traditional indigo making method.

Decolorization of Dyehouse Effluent and Biodegradation of Congo Red by Bacillus thuringiensis RUN1

  • Olukanni, O.D.;Osuntoki, A.A.;Awotula, A.O.;Kalyani, D.C.;Gbenle, G.O.;Govindwar, S.P.
    • Journal of Microbiology and Biotechnology
    • /
    • 제23권6호
    • /
    • pp.843-849
    • /
    • 2013
  • A dye-decolorizing bacterium was isolated from a soil sample and identified as Bacillus thuringiensis using 16S rRNA sequencing. The bacterium was able to decolorize three different textile dyes, namely, Reactive blue 13, Reactive red 58, and Reactive yellow 42, and a real dyehouse effluent up to 80-95% within 6 h. Some non-textile industrially important dyes were also decolorized to different extents. Fourier transform infrared spectroscopy and gas chromatography-mass spectrometer analysis of the ethyl acetate extract of Congo red dye and its metabolites showed that the bacterium could degrade it by the asymmetric cleavage of the azo bonds to yield sodium (4-amino-3-diazenylnaphthalene-1-sulfonate) and phenylbenzene. Sodium (4-amino-3-diazenylnaphthalene-1-sulfonate) was further oxidized by the ortho-cleavage pathway to yield 2-(1-amino-2-diazenyl-2-formylvinyl) benzoic acid. There was induction of the activities of laccase and azoreductase during the decolorization of Congo red, which suggests their probable role in the biodegradation. B. thuringiensis was found to be versatile and could be used for industrial effluent biodegradation.

UV-assisted surface modification of polyethersulfone (PES) membrane using TiO2 nanoparticles

  • Singh, Shruti;Karwa, Vinay;Marathe, K.V.
    • Membrane and Water Treatment
    • /
    • 제9권6호
    • /
    • pp.393-403
    • /
    • 2018
  • In this research commercial polyethersulfone (PES) membrane was modified using $TiO_2$ nanoparticles (P-25 Degussa) and further irradiated using UV light to overcome the hydrophobicity and fouling nature of the membrane. Further the membranes were characterized using SEM and FTIR. Contact angle measurements study confirmed the hydrophilic tendency of the modified membrane by decreasing the contact angle from $73^{\circ}$ to $20.28^{\circ}$. The modified membranes showed higher flux and better anti-fouling properties as compared to the unmodified counterparts. The optimum conditions were found to be 0.5 wt% $TiO_2$ loading with 60 min membrane immersion and 10 min UV light illumination. The effect of different pH conditions of feed was analysed. Real wastewater filtration experiments also indicated better performance of modified membranes as opposed to neat PES membranes.

제 2급 와동에서 구치부 복합레진의 미세변연누출에 관한 연구 (MICROLEAKAGE OF POSTERIOR PACKABLE COMPOSITE RESIN hi THE GINGIVAL MARGINS OF CLASS II CAVITIES)

  • 최수진;김미자;권혁춘
    • Restorative Dentistry and Endodontics
    • /
    • 제27권3호
    • /
    • pp.249-256
    • /
    • 2002
  • The use of flowable composite resins as liners in class II packable composite restoration has been suggested by some manufacturers. However, the contributions of this technique are unproven. The purpose of this study was to compare the gingival microleakage in class II packable composite restorations with or without the use of flowable composite resins as liners. Slot cavities were prepared on both proximals of 80 extracted human molars and randomly assigned to 8 groups of 20 each. The gingival margins were located at 1mm above CEJ in 80 cavities (group1-4) and 1mm below CEJ in 80 cavities (group5-8). The prepared teeth were mounted in the customized tray with adjacent teeth to simulate clinical conditions and metallic matrix band (Sectional matrix) and wooden wedges were applied. After acid etching and application of Single Bond, each group was restored with the following materials using incremental placement technique: Group 1,5 (Filtek P60), group 2, 3, 4 and group 6, 7, 8 (AeliteFlo, TetricFlow, Revolution/ Filtek P60). All specimens were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 1 mimute dwell time, immersed 2% methylene blue dye for 24 hours and then rinsed with tab water. The specimens were embedded in clear resin and sectioned longitudinally through the center of restoration with a low speed diamond saw. Dye penetration at gingival margin was viewed at 20 magnification and analyzed on a scale of 0 to 4. Kruscal-Wallis One way analysis and Mann-Whitney Rank sum test were used to analyze the results. The results of this study were as follows. 1. The leakage values seen at the enamel margin were significantly lower than those seen at the dentin margin(P<0.05). 2. On the enamel margin, packable composite resins with flowable liners showed lower leakage than those without flowable liners, but there were no significant differences among the four groups(P>0.05). 3. On the dentin margin, four groups demonstrated moderate to severe leakage, and there were no significant differences in leakage values(P>0.05).