• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.8-18
• /
• 1994

In one bath dyeing system of silk/cellulose acetate fiber blend fabric with acid /disperse dyes, adsorption behavior of acid dyes and disperse dyes on silk and cellulose acetate fabrics were examined. In the dyeing of cellulose acetate with C. I. Disperse Red 19(Red 19) and C. I. Disperse Red 60(Red 60) at 8$0^{\circ}C$ and 10$0^{\circ}C$, dye uptake with Red 19 was higher than that with Red 60. When the silk/cellulose acetate dyed with Red 19 and Red 60 at 10$0^{\circ}C$, dye uptake on cellulose acetate was influenced by affinity of the dye to the silk fabric dyed together. When the silk/cellulose acetate dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$, color of cellulose acetate dyed with Red 19 and Red 60 was not influenced by Blue 80 but silk dyed with Blue 80 was influenced by Red 19 and Red 60. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.31-38
• /
• 2006

Micellar electrokinetic capillary chromatography(MECC) and HPLC with ion-pairing mechanism were applied for the separation of the well known environmental wastes from dye industry. These compounds include H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid and 2-naphthylamine-1,5-disulfonic acid, and are known to be the diazo components of the azo dye. MECC method was also applied to separate few acid dyes including Acid Orange 7, Acid Orange 5 and Acid Blue 92 and direct dye such as Direct Red 80. Informations about the diazo components of any azo dye could be obtained by comparison of electropherogram of the reduction solution of a given dye with those obtained from standard materials such as H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid and 2-naphthylamine-1,5-disulfonic acid. It has been concluded that MECC and HPLC with ion-pairing mechanism could be successfully applied for the analysis of unknown dyes and their diazo components.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.67-78
• /
• 1993

In one bath dyeing system of silk/PET fiber blend fabric with acid/disperse dyes, adsorption behavior of disperse dyes and acid dyes on silk and PET fabrics were examined. In the dyeing of PET with C.I.Disperse Red 19(Red 19) and C.I.Disperse Red 60(Red 60) at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake with Red 60 was higher than that with Red 19. When the silk/PET dyed with Red 19 and Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake on PET was influenced by affinity of the dye to the silk fabric dyed together. When the silk/PET dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$ for 60 minutes, color of PET dyed with Red 19 and Red 60 was little influenced by Blue 80 but silk dyed with Blue 80 was influenced. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.67-73
• /
• 1994

The adsorption behaviors of acid dye and disperse dye on silk and nylon fabrics were examined, in one bath dyeing system on silk/nylon blend fabric with disperse dyes and acid dyes. In the dyeing of nylon fabric with C. I. Disperse Red 19 (Red 19) and C. I. Disperse Red 60 (Red 60), dye uptake of Red 19 was higher than that of Red 60. When silk/nylon blend fabric was dyed with Red 19 and Red 0, the dye uptake on nylon was influenced by the ffinity of the dye to the silk fabric. In the dyeing of silk/nylon with C. I. Acid Blue 80 and C. I. Acid Yellow 121, solid shade could not be obtained with the conventional method but could be obtained with the dyeing resist agent for nylon. There was not any relationship between K/S value and Munsell value, but Munsell value tended to change with the K/S value.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.592-599
• /
• 2018

The kinetics and thermodynamics of the adsorption of acid blue 40 from an aqueous solution by activated carbon were examined as a function of the activated carbon dose, pH, temperature, contact time, and initial concentration. The adsorption efficiency in a bathtub was increased at pH 3 and pH 11 due to the presence of sufonate ions ($SO_3{^-}$) and amine ions ($NH_2{^+}$). The equilibrium adsorption data were fitted to the Langmuir, Freundlich and Temkin isotherms. The results indicated that the Langmuir model provides the best correlation of the experimental data. The separation factor of the Langmuir and Freundlich model showed that the adsorption treatment of acid blue 40 by activated carbon could be an effective adsorption process. The adsorption energy determined by the Temkin equation showed that the adsorption step is a physical adsorption process. Kinetics analysis of the adsorption process of acid blue 40 on activated carbon showed that a pseudo second order kinetic model is more consistent than a pseudo second order kinetic model. The estimated activation energy was 42.308 kJ/mol. The enthalpy change (80.088 J/mol) indicated an endothermic process. The free energy change (-0.0553 ~ -5.5855 kJ/mol) showed that the spontaneity of the process increased with increasing adsorption temperature.

• Journal of Sensor Science and Technology
• /
• v.26 no.6
• /
• pp.420-426
• /
• 2017

A colorimetric sensor was investigated to achieve a low-cost warning device for harmful gaseous formaldehyde (HCHO). The sensor is based on selective reactions between hydroxylamine sulfate and HCHO, leading to the production of sulfuric acid. The produced acid results in color-changing response through the acid-base reaction with dye molecules impregnated on a solid membrane substrate. For attaining this purpose, sensors were fabricated by drop-casting a dye solution prepared using different pH indicators on various commercially available polymer sheets, and their colorimetric responses were evaluated in terms of sensitivity and reliability. The colorimetric sensor using bromophenol blue (BPB) and nylon sheet was found to exhibit the best performance in HCHO detection. An initial bluish green of a sensor was changed to yellow when exposed to gaseous formaldehyde. The color change was recorded using an office scanner and further analyzed in term of RGB distance for quantifying sensor's response at different HCHO(g) concentrations. It exhibited a recognizable colorimetric response even at 50 ppb, being lower than WHO's standard of 80 ppb. In addition, the sensor was found to have quite good selectivity in HCHO detection under the presence of common volatile organic compounds such as ethanol, toluene, and hexane.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.57-65
• /
• 2016

Indigo (Polygonum tinctorium L.) is a typical blue dye which had been used from ancient times. This study was going to shade the complicated traditional methods extracting indigo dye by the fermentation and producing as adsorbate on calcium hydroxide, which says so called as the 'Indigo lime'. Accordingly we were going to make indigo through the hydrolysis of the hot water extractives of indigo leaves simply. During hot-water extraction, ${\beta}$-glucosidase which required hydrolysis of the linkage between indigo and glucose was not activated. To achieve this goal, indican was acid-hydrolyzed to glucose and indigo. The acetic acid, citric acid, hydrochloric acid, and sulfuric acid were used for the hydrolysis of hot water extractives. The hydrolysis conditions of extractives performed in water bath at $80^{\circ}C$ for 120 minutes and in an autoclave for 120 minutes. In the acid hydrolysis of extracted indican by hot water, the indican yields of acetic acid and hydrochloric acid hydrolysis were higher than sulfuric acid in water bath. Also, the indican yield of hydrochloric acid hydrolysis was better than sulfuric acid in autoclave. The hot water extracted indican was confirmed by HPLC analysis and its structure was confirmed by UV-Vis and FT-IR spectroscopy, compared with isolated indigo and commercial synthesized indigo. This improved extraction and hydrolysis methods can be replace the traditional indigo making method.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.6
• /
• pp.843-849
• /
• 2013

A dye-decolorizing bacterium was isolated from a soil sample and identified as Bacillus thuringiensis using 16S rRNA sequencing. The bacterium was able to decolorize three different textile dyes, namely, Reactive blue 13, Reactive red 58, and Reactive yellow 42, and a real dyehouse effluent up to 80-95% within 6 h. Some non-textile industrially important dyes were also decolorized to different extents. Fourier transform infrared spectroscopy and gas chromatography-mass spectrometer analysis of the ethyl acetate extract of Congo red dye and its metabolites showed that the bacterium could degrade it by the asymmetric cleavage of the azo bonds to yield sodium (4-amino-3-diazenylnaphthalene-1-sulfonate) and phenylbenzene. Sodium (4-amino-3-diazenylnaphthalene-1-sulfonate) was further oxidized by the ortho-cleavage pathway to yield 2-(1-amino-2-diazenyl-2-formylvinyl) benzoic acid. There was induction of the activities of laccase and azoreductase during the decolorization of Congo red, which suggests their probable role in the biodegradation. B. thuringiensis was found to be versatile and could be used for industrial effluent biodegradation.

• Membrane and Water Treatment
• /
• v.9 no.6
• /
• pp.393-403
• /
• 2018

In this research commercial polyethersulfone (PES) membrane was modified using $TiO_2$ nanoparticles (P-25 Degussa) and further irradiated using UV light to overcome the hydrophobicity and fouling nature of the membrane. Further the membranes were characterized using SEM and FTIR. Contact angle measurements study confirmed the hydrophilic tendency of the modified membrane by decreasing the contact angle from $73^{\circ}$ to $20.28^{\circ}$. The modified membranes showed higher flux and better anti-fouling properties as compared to the unmodified counterparts. The optimum conditions were found to be 0.5 wt% $TiO_2$ loading with 60 min membrane immersion and 10 min UV light illumination. The effect of different pH conditions of feed was analysed. Real wastewater filtration experiments also indicated better performance of modified membranes as opposed to neat PES membranes.

• Restorative Dentistry and Endodontics
• /
• v.27 no.3
• /
• pp.249-256
• /
• 2002

The use of flowable composite resins as liners in class II packable composite restoration has been suggested by some manufacturers. However, the contributions of this technique are unproven. The purpose of this study was to compare the gingival microleakage in class II packable composite restorations with or without the use of flowable composite resins as liners. Slot cavities were prepared on both proximals of 80 extracted human molars and randomly assigned to 8 groups of 20 each. The gingival margins were located at 1mm above CEJ in 80 cavities (group1-4) and 1mm below CEJ in 80 cavities (group5-8). The prepared teeth were mounted in the customized tray with adjacent teeth to simulate clinical conditions and metallic matrix band (Sectional matrix) and wooden wedges were applied. After acid etching and application of Single Bond, each group was restored with the following materials using incremental placement technique: Group 1,5 (Filtek P60), group 2, 3, 4 and group 6, 7, 8 (AeliteFlo, TetricFlow, Revolution/ Filtek P60). All specimens were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 1 mimute dwell time, immersed 2% methylene blue dye for 24 hours and then rinsed with tab water. The specimens were embedded in clear resin and sectioned longitudinally through the center of restoration with a low speed diamond saw. Dye penetration at gingival margin was viewed at 20 magnification and analyzed on a scale of 0 to 4. Kruscal-Wallis One way analysis and Mann-Whitney Rank sum test were used to analyze the results. The results of this study were as follows. 1. The leakage values seen at the enamel margin were significantly lower than those seen at the dentin margin(P<0.05). 2. On the enamel margin, packable composite resins with flowable liners showed lower leakage than those without flowable liners, but there were no significant differences among the four groups(P>0.05). 3. On the dentin margin, four groups demonstrated moderate to severe leakage, and there were no significant differences in leakage values(P>0.05).