• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.121-126
• /
• 2017

Recently, a lot of people use touch-pen devices such as smart phones and tab computers. To generate the picture and text, a user can give input or control the touch-pen device through simple or multi-touch gestures by touching the screen with a special stylus pen and/or one or more fingers. The accuracy and response time from the moment of contact with the touch board is very important to the touch device. Therefore, research is needed to find a way of removing the noise included in the touch signal quickly and efficiently. In this paper, we propose a method for removing a noise mixed in with a touch point coordinate which has been caused by a input pen on the touch screen. For effective filtering, the fast sampling of the coordinate corresponding to the noise from the input signal is required primarily. Secondly the total compensation of the touch coordinates using the characteristics of the B-Spline curve is applied to correct coordinates of the points. This method can ensure a real-time response than other algorithms. The applied performance evaluation method is comparing error pixels with evaluation values by dividing 10 intervals on the touch pad diagonally. Usually the average error is 7.1 pixels but our proposed method shows an average 4.1 errors. Therefore, our proposed touch pen method can express the input signal on the coordinates more correctly.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.4
• /
• pp.429-434
• /
• 2012

This paper presents a technology for manipulating external devices by Brain Computer Interface (BCI) system. Recently, BCI based rehabilitation and assistance system for disabled people, such as patient of Spinal Cord Injury (SCI), general paralysis, and so on, is attracting tremendous interest. Especially, electroencephalogram (EEG) signal is used to organize the BCI system by analyzing the signals, such as evoked potential. The general findings of neurophysiology support an availability of the EEG-based BCI system. We concentrate on the event-related synchronization of motor imagery EEG signal, which have an affinity with an intention for moving control of external device. To analyze the brain activity, short-time Fourier transform and particle swarm optimization are used to optimal feature selection from the preprocessed EEG signals. In our experiment, we can verify that the power spectral density correspond to range mu-rhythm(${\mu}8$~12Hz) have maximum amplitude among the raw signals and most of particles are concentrated in the corresponding region. Result shows accuracy of subject left hand 40% and right hand 38%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.239-241
• /
• 2011

Recently, studies on the indoor positioning system in application of wireless AP have been actively going on. The indoor wireless positioning system can be classified into several types according to the positioning techniques. Among them, the fingerprint technique is a technique that establishes the radio map by collecting MAC information of AP and RSSI (Received Signal Strength Indication) before executing positioning and then determines the position in comparison with the information of AP collected during the course of positioning. In the traditional fingerprint techniques, they control and manage by installing APs that are utilized for positioning. However, in case of specific indoors, the management can be done by installing a small number of APs but, in case of wide outdoors, it's practically impossible to install and manage equipments for positioning. In order to solve such problem, there is an improved fingerprint technique that utilizes the APs that are already scattered around. This technique will allow positioning without additional cost, but even the improved fingerprint positioning technique may incur dropped accuracy as well due to wide fluctuation of the AP information. In this paper, the traditional fingerprint technique and the improved fingerprint technique are explained in comparison, and we will compares difference in performance with the proposed WPS_WS (Wi-Fi Positioning System_Weak Signal) technique.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.1-7
• /
• 2020

Recently 5G technology is one of the technologies that has been receiving much positive responses from users as it is integrated with virtual technology. However, 5G's security issues have not been fully resolved and more security is soon required. In this paper, an approach technique is proposed as a probability-based hierarchy to provide personal privacy for 5G-based IoT users more safely. The proposed technique is aimed at not exposing the privacy of IoT users to third parties by using two random keys created personally by IoT users. In order to satisfy both safety and efficiency, the proposed technology divides the privacy of IoT users into two layers. In the first stage, IoT users will control access to intermediate media using anonymous keys generated by IoT users, and in the second stage, information of IoT users registered with servers will be darkened and replicated. The proposed technique has improved the accuracy of the privacy protection of IoT users as they assign weights to layered information after layering users' privacy information on a probabilistic basis.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.28-39
• /
• 2010

In this paper, a new method to estimate MU (motor unit) location in the short head of BIC (biceps brachii) muscle using surface EMG (electromyogram) is proposed. The SMUAP (single motor unit action potential) is generated from a MU located at certain depth from the skin surface. The depth is referred as MU location. For estimating muscle force precisely, the information of the MU location is required. The reference SMUAPs are simulated based on anatomical structure of human muscle, and compared with acquired real EMG signals using 3-channel surface EMG electrode. The proposed method was compared with the results of previous researchers and verified its accuracy by computer simulation. From the simulation result in case of the MU located in 8[mm], the average estimation error of proposed method was 0.01[mm]. But the average estimation error of Roeleveld's method was 2.33[mm] and Akazawa's method was 1.70[mm]. Therefore the proposed method was more accurate than the methods of previous researchers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1665-1673
• /
• 2013

Recently, the interest and demand on free formed structure providing aesthetic value as well as functionality has been increasing. Formwork has numerous advantages such as high strength, convenience, accuracy and good quality of surface roughness. Nevertheless, it increases construction cost and period to build complex shapes. For these purpose, deposition construction systems such as Contour Crafting and Concrete Printing have been developed with active collaboration between university and industry by applying the rapid prototyping technology to the construction industry in USA and England. Since there has been no related research in Korea, the possibility of spin-off technology and its fusion cannot be expected. In this paper, design elements including mechanical system and control system related to automatic deposition construction system prototype for constructing a free curved structure without mold are described. As for an appropriate material for the system, fiber reinforced mortar was selected by experiments on compressive strength, fluidity, viscosity and setting time. By performing transfer and extrusion experiments, the possibility of the development of deposition construction system was demonstrated. Based on this research results, it is required to keep the automatic deposition construction system improve and extend it into the new application area in construction industry.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.383-387
• /
• 2014

In this paper, for a new detection system development with the better accurate dose evaluation and beam distribution imaging using the small field irradiation of linear accelerator, the compound semiconductor based detection sensors were fabricated and the performance evaluation was investigated. The special particle-in-binder sedimentation was used for a large area film sensor fabrication. The detection properties for high energy x-rays were investigated from a dark current, an output current, a rising time, a falling time, and response delay measurement. The experimental results, the $TiO_2$ mixed $HgI_2$ sensor showed the best electrical characteristics than $PbI_2$, PbO, pure $HgI_2$. Linearity, repeatability, and accuracy tests from LINAC were tested, the $TiO_2$ mixed $HgI_2$ sensor showed the better performance than the commercially available dosimetry devices.

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.221-225
• /
• 2017

To evaluate the performance of ultrasound imaging system, we investigated the change of spatial resolution according to changing sonic velocity change parameter provided by ultrasound equipment. Ultrasound phantom images were obtained using a 3.0 ~ 5.0 MHz convex transducer in an ultrasound diagnostic device used at a medical institution located at Iksan. N-365 multi-purpose ultrasound phantom was used to measure longitudinal distance measurement accuracy and longitudinal and transverse resolution. In the same manner, the sonic velocity of the ultrasound equipment was changed from 1580 m/sec to 1400 m/sec in six steps, and the full width at half maximum(FWHM) was measured using the image J program to determine whether the measured values were different. As a result, lateral resolution was measured from 1.91 mm to 5.3 mm according to the speed change, and the smallest FWHM was 1.91 mm at 1420 m/sec. The axial resolution was measured from 1.03 mm to 1.14 mm according to the speed change, and the smallest FWHM was 1.03 mm at 1400 m/sec. The slower the sound velocity of the ultrasound equipment, the shorter the length of longitudinal measurement.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1261-1265
• /
• 2003

Axial piston pumps of bent axis have been commonly used in hydraulic systems because of high pressure level. best efficiency, low shear force on pistons and low operating costs. The other side, they have a few demerits like that they have the relatively high number of moving parts and more discharge pressure ripples. Especially, the discharge pressure ripples bring about vibrations and noises in hydraulic system components such as connecting pipes and control valves, so that these deteriorate the stability and accuracy of the systems. Therefore, the hydraulic systems having the axial piston pumps of bent axis require the methods to reduce the discharge pressure ripples. So, the purpose of this paper is to reduce the discharge pressure ripples by the phase interference of pressure wave and to develope the analysis model of the pumps to predict the discharge pressure ripples. In this paper, the analysis model of the axial piston pumps of bent axis was developed using the AMESim software, and the reliability of that was verified by the comparison with the experimental results. The hydraulic pipeline with a parallel line was used as the method to generate the phase interference of pressure wave. the dynamics characteristics of the hydraulic pipeline with a parallel line were analyzed by a transfer matrix method. the usefulness of the phase interference of pressure wave was investigated through the experiment and simulation. The results from the experiment and simulation said that the phase interference of pressure wave by the hydraulic pipeline with a paralle linel could reduce the discharge pressure wave of the pump well. The analysis model of the axial piston pumps of bent axis developed in this paper and the method of the phase interference by the hydraulic pipeline with a parallel line are expected to be helpful to achieve the design of the pump and to reduce the discharge pressure wave of the pump effectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.333-340
• /
• 2019

This study attempted to eatablish a high performance liquid chromatography (HPLC) analysis method for the determination of avicularin, quercitrin as a part of the quality control for the development of functional cosmetic materials from Astilbe chinensis extract. HPLC was performed on a Capcell Pak C₁₈ MGII column with a gradient elution of 0.05% (v/v) trifluoroacetic acid (TFA) and acetonitrile at a flow rate of 1.0 mL/min at 30 ℃. The analyte was detected at 254 nm. The HPLC method was performed in accordance with the international conference on harmonization (ICH) guideline (version 4, 2005) of analytical procedures with respect to specificity, precision, accuracy, and linearity. The limits of detection and quantitation of avicularin and quercitrin were 0.094 and 0.285 mg/mL, 0.031 and 0.095 mg/mL respectively. Calibration curves showed good linearity r² > 0.99990 for avicularin and r² > 0.99994 for quercitrin. Precision of analysis was satisfied with less than 0.59% for avicularin and 0.63% for quercitrin. Recoveries of quantified compounds ranged from 100.97 to 101.77% for avicularin and 100.18 to 100.32% for quercitrin. These result indicated that the established HPLC method is very useful for the determination of marker compounds in A. chinensis extracts.