• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.611-626
• /
• 2017

The research reported herein is concerned with the model testing of piles socketed in soft rock which was simulated by cement, plaster, sand, water and concrete hardening accelerator. Model tests on a single pile socketed in simulated soft rock under axial cyclic loading were conducted and the bearing capacity and accumulated deformation characteristics under different static, and cyclic loads were studied by using a device which combined oneself-designed test apparatus with a dynamic triaxial system. The accumulated deformation of the pile head, and the axial force, were measured by LVDT and strain gauges, respectively. Test results show that the static load ratio (SLR), cyclic load ratio (CLR), and the number of cycles affect the accumulated deformation, cyclic secant modulus of pile head, and ultimate bearing capacity. The accumulated deformation increases with increasing numbers of cycles, however, its rate of growth decreases and is asymptotic to zero. The cyclic secant modulus of pile head increases and then decreases with the growth in the number of cycles, and finally remains stable after 50 cycles. The ultimate bearing capacity of the pile is increased by about 30% because of the cyclic loading thereon, and the axial force is changed due to the applied cyclic shear stress. According to the test results, the development of accumulated settlement is analysed. Finally, an empirical formula for accumulated settlement, considering the effects of the number of cycles, the static load ratio, the cyclic load ratio and the uniaxial compressive strength, is proposed which can be used for feasibility studies or preliminary design of pile foundations on soft rock subjected to cyclic loading.

• 농촌지도와개발
• /
• 제23권4호
• /
• pp.431-439
• /
• 2016

There are rural development policy for creating liveable rural. The support structure of the capacity phase of the Master Plan of Comprehensive Rural Village Development Project would that one. The support structure of the capacity phase has implied the assumption that the accumulated capacity of the village to the previous step will have a significant impact on the business to the next level. Rural development should be understood that simple: rather than for business applications, processes community is going to build capacity through continuous learning and practice. Its accumulated capacity should be possible to predict and then steps must be developed continuously for a long time, looking at the previous phase. Thus, according to the support structure of the capacity phase, it should be applied a causal relationship between the front and rear phase.

• 한국습지학회지
• /
• 제12권3호
• /
• pp.99-106
• /
• 2010

본 연구는 안성천 상류유역에서 관측된 강우량 및 유출량을 근거로 하여 단위도와 침투능 곡선식을 결정하고 유역내 침투량 측정에 의한 침투능 곡선과 비교하였다. 누가침투량 곡선식은 단위도와 밀접한 관계가 있다. 침투량 곡선식을 유도하기 위하여 다음 두가지 방법을 적용하였다. 첫 번째 방법은 안성천 공도수위관측소에서 계측된 유량과 유역에서 계측된 강우량을 근거로 하여 침투지표법에 의한 유역의 평균침투능 및 Kostiakov 형 누가침투량 곡선을 산정하였다. 두 번째 방법은 유역내 4개지점을 선정하고 더블링 침투계를 이용하여 시간별 누가침투량을 측정하고 누가침투량 곡선식을 산정하였다. 두가지 방법으로 구한 Kostiakov 형 누가침투량 곡선에 의한 침투량 양상을 비교하였다.

• Structural Engineering and Mechanics
• /
• 제3권6호
• /
• pp.611-622
• /
• 1995

This paper is concerned with inelastic load carrying capacity of tapered steel members with or without accumulated plastic strains resulted from previous loading histories. A finite element program is developed using stiffness matrices of tapered members and is applicable for analyses with material and geometric nonlinearity. Results of analyses are compared with other available solutions and with experimental results.

• 지질공학
• /
• 제20권2호
• /
• pp.137-146
• /
• 2010

강우시 침투량 산정을 위하여 일반적으로 기존의 침투능 산정식인 Horton 공식 및 Green-Ampt 공식으로 지반 내 침투능을 산정해 왔다. 하지만, 실제 강우로 인한 지반 침투는 연속적으로 침투가 이루어지므로, 이와 같은 불연속적인 침투량 산정공식의 단점을 보완하고자 연속적인 침투능 산정공식을 새로이 유도하여, 침투능 및 침투량을 비교 분석하고자 하였다. 유도된 식 및 기존의 침투공식을 검증하기 위한 침투실험을 행하여 각 식의 결과들을 비교 분석하였다. 함수비 혹은 포화도의 함수인 불포화투수계수는 직접적으로 침투능 및 침투량에 영향을 끼치므로, 새로이 유도된 식은 침투과정에 따른 불포화투수계수의 변화를 이용하여 보다 정확한 침투능 및 침투량을 산정하고자 하였으며, 침투로 인한 구조물의 안정 및 지하수 거동을 보다 정확히 해석하기 위한 것이다.

• 지식경영연구
• /
• 제15권3호
• /
• pp.95-120
• /
• 2014

In order to successfully adapt in ever-changing social and economic environment, organizational members need to get a capacity to be open to accepting change, effectively leverage the knowledge assets accumulated inside and outside the company for pursuing new values. In this study, we defined such competence as generativity capacity and demonstrated mechanism for forming generativity capacity and an impact on job performance. We suggested absorptive capacity, tertius iungens orientation, use of information technology as antecedent variables of generativity capacity. For empirically verifying the proposed model, we collected sample data from 201 workers and conducted analysis using a structural equation modeling. The empirical analysis results revealed that all of the proposed antecedent variables significantly impacted on generativity capacity, which in turn had a significant effect on job performance. We expect that this study will provide researchers and managers who want to get a broader perspective on knowledge management beyond the boundaries with useful theoretical and practical implications.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권5호
• /
• pp.471-476
• /
• 1995

The relationship between udder maximum capacity (36-h accumulated milk yield) and the response of dairy cows (average producers) to thrice-daily milking was studied in 25 Friesian and 15 Jersey cows using the technique of half-udder study. Maximum half-udder capacity (acual yield) as well as whole udder capacity (estimated by udder measurements) was not altered significantly after 12-day thrice-daily milking period compared with a similar twice-daily period, although there was a positive response to increased milking frequency on secretion rate during this period. No effect of breed, season of the year or stage of lactation was observed on the above relationship. Hours-worth of capacity was higher with increased milking frequency, with Jersey than Friesian. These results suggest that udder capacity is not a limiting factor in increased milk production.

• 한국전기전자재료학회논문지
• /
• 제29권5호
• /
• pp.298-302
• /
• 2016

In this work, $LiMn_2O_4$ and $LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ cathode materials are mixed by some specific ratios to enhance the practical capacity, energy density and cycle performance of battery. At present, the most used cathode material in lithium ion batteries for EVs is spinel structure-type $LiMn_2O_4$. $LiMn_2O_4$ has advantages of high average voltage, excellent safety, environmental friendliness, and low cost. However, due to the low rechargeable capacity (120 mAh/g), it can not meet the requirement of high energy density for the EVs, resulting in limiting its development. The battery of $LiMn_2O_4-LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ (50:50 wt%) mixed cathode delivers a energy density of 483.5 mWh/g at a current rate of 1.0 C. The accumulated capacity from $1^{st}$ to 150th cycles was 18.1 Ah/g when the battery is cycled at a current rate of 1.0 C in voltage range of 3.2~4.3 V.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2187-2189
• /
• 2001

The proposed algorithm has produced the rules of relationship between the load voltage, current, discharging electric power and ampere-hours, electric power capacity of battery on the basis of the data. Which were acquired through the battery discharging experiment that is defined by the battery's ambient temperature and various load conditions. Especially, by calculating the parameter of second order polynomial equation relation between the remaining capacity and the electric power, the algorithm is proposed adapting for the discharging pattern. And as the depth of discharging is increasing, the calculation-method of electric power is applied to decrease the accumulated error in the calculation method of capacity accumulation. Also, the proposed algorithm has compensated the temperature considering the capacity change of battery to the temperature.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권7호
• /
• pp.43-52
• /
• 2015

The uranium removal capacity of radish sprouts (Raphanus sativus L.) in groundwater was calculated on the basis of the amount of uranium accumulated in the radish sprouts rather than the concentration in solution, of which process was very limited in previous studies. Continuous rhizofiltration clean-up system was designed to investigate the feasibility of radish sprouts, applying for uranium contaminated groundwater (U concentration: 110 μg/L) taken at Bugogdong, Busan. Six acrylic boxes (10 cm × 30 cm × 10 cm) were connected in a direct series for the continuous rhizofiltration system and 200 g of radish sprouts cultivars was placed in each box. The groundwater was flushed through the system for 48 hours at the constant rate of 5 mL/min. The rhizofiltration system was operated in the phytotron, of which conditions were at 25℃ temperature, 70% of relative humidity, 4,000 Lux illumination (16 hours/day) and 600 mg/L of CO₂ concentration. While 14.4 L of contaminated groundwater was treated, the uranium removal efficiency of the radish sprouts (1,200 g in wet weight) was 77.2% and their removal capacities ranged at 152.1 μg/g-239.7 μg/g (the average: 210.8 μg/g), suggesting that the radish sprouts belong to the group of hyper-accumulation species. After the experiment, the sum of U amounts accumulated in radish sprouts and remained in groundwater was 1,472.2 μg and the uranium recovery ratio of this rhizofiltration experiment was 92.9%. From the results, it was investigated that the radish sprouts can remove large amounts of uranium from contaminated groundwater in a short time (few days) because the fast growth rate and the high U accumulation adsorption capacity.