• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.1
• /
• pp.1-10
• /
• 1987

We selected four kinds of cotton velvet and chafed before and after cleaning, then in accordance with abrasion times we measured of pile exclusion rate and examined the relationship of the pile exclusion rate, its thickness and the air permeability. An experimental study was carried out the pile weave construction, the density, the yarn to yarn, the shrinkage, and the pile substantiality. The results were as follows: 1. In accordance with increments of shrinkage phenomenon of pile fabric for cleaning process, pile exclusion rate was decreased. 2. The ground weave of pile fabric and the yarn to yarn of warp and weft direction were affected by the pile exclusion. 3. It is linear of pile substantiality of pile fabric and pile fastness. 4. In estimation of pile exclusion rate, it is proper to make use of air permeability and measuring value of thickness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.4
• /
• pp.431-441
• /
• 1998

Polyester microfiber fabrics were decomposed at 100, 110, 120 and 140 t of temperature and 0.5, 1.0 and 1.5% of sodium propyleneglycolate/propyleneglycol solution(SPG-PG). Characteristic decomposition feature and physical and chemical properties of the decom- posed PET microfiber fabrics were discussed. The activation energy was 18.77 kcal/mol and the dyeability of the decomposed PET microfiber fabrics was found to be improved as it was supported by the examined K/S values. Up to the 20% of the weight loss of the PET microfiber fabrics, K/S values incresed with increasing the weight loss. The melting temperature of PET microfiber fabrics decomposed by SPG-PG showed no fundamental change. Tensile strength of the decomposed PET microfiber fabrics decreased linearly in accordance with the increased the weight loss of the PET microfiber fabrics. The moisture regain and the tactilities increased in accordance with the increased the weight loss of the PET microfiber fabrics.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.3 s.25
• /
• pp.97-107
• /
• 2007

The purpose of this study is to grasp the characteristic of indoor thermal environment from large enclosures in connection with heating condition and outdoor environment. This study has measured indoor thermal environment in accordance with heat loads from occupant for large enclosures in winter. We examined indoor thermal environment of the large enclosures in this study which include temperature distribution vertical, horizontal, seat and surface and thermal comfort environment.

• Journal of Digital Convergence
• /
• v.6 no.3
• /
• pp.121-129
• /
• 2008

This paper aimed to exam the influence factor of purchasing decision making of industrial buyer and analyzed their effects on success. From the previous studies, we extracted influence factor which are buying center, character of Industrial goods provider. The result showed the difference in the purchasing decision-making process in accordance with the type of buying task(Hypothesis 1). And a test was made the difference in the mode of purchase decision-making(Hypothesis 2). A test was made the difference in supplier's evaluative criterion in accordance with the type of buying task(Hypothesis 3).

• Journal of the Korean Society for information Management
• /
• v.5 no.2
• /
• pp.53-98
• /
• 1988

The purpose of this Study is to irwest~gate the Zipfian distribution in Har~gul literature. The result shows that the formulas derived from the liangul Ilterature are it1 accordance with the getlcra\ized Zipf's first law. The result also shows that the formulas derived from the Harlgul literature arc2 not in accordance with the Zlpf's second law and the penerali~ed Zipf's second law.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.3
• /
• pp.13-19
• /
• 2016

Element-focused network analysis method for truss structure is proposed. The propagation process of loads from external loads to connected other elements is similar to that of connections between nodes in accordance with attachment rule in a network. Here nodes indicate elements in a truss structure and edges represent propagated loads. Therefore, the flows of loads in a truss structure can be calculated using the network analysis method, and consequently the structure can also be analyzed. As a first step to analyze a truss structure as a network, we propose a local load transfer rule in accordance with the topology of elements, and then analyze the loads of the truss elements. Application of this method reveal that the internal loads and reactions caused by external loads can be accurately estimated. Consequently, truss structures can be considered as networks and network analysis method can be applied to further complex truss structures.

• KIEAE Journal
• /
• v.11 no.4
• /
• pp.47-54
• /
• 2011

Construction companies find it increasingly necessary to reduce the cost as the construction market has been suffering from a depression and the industrial environment has been changing fast lately. The cost cut demands the productivity management of the field operations, which can be made feasible by assigning an appropriate number of managers on the construction site. However, previous studies are focused on the labor productivity and construction companies take into account only the revenue per worker in organizing the staff. The purpose of this study is to research the model for calculating the field management manpower in accordance with the characteristic of project and site conditions which are usually considered in the beginning of the construction project. The data about apartment building projects of domestic large constructors and factors related to them were statistically analyzed. The results of this study can be used to calculate the necessary field management manpower in accordance with the characteristic of project.

• Journal of Power System Engineering
• /
• v.5 no.3
• /
• pp.17-24
• /
• 2001

In order to investigate a characteristic of the behavior of spray pattern in accordance with running conditions for a DI diesel engine, the PLN Injection system with changeable revolution speed of fuel injection cam was set up, and through this, history curves of injection pressure for a similar real DI diesel engine were able to be displayed. Authors visualized and analyzed the sprays at various revolution speed of fuel injection cam, and found out that fuel distributions of the sprays in the low speed condition were bad, fuel with air was injected from the hole of nozzle at the beginning of injection, and wide spray angle at the early stage of injection became narrower with elapsed time, but wider again at the end of injection.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.5
• /
• pp.46-54
• /
• 2001

In this paper, a co-axial cylinder type ozonizer using silent discharge applying radio frequency voltage known as an ozone generation was designed and fabricated. A cooling system was installed to investigate the characteristics of ozone generation in accordance with temperature change of the supplied gas known as an important factor. The characteristics of ozone generation were investigated in accordance with the change of cooling temperature.

• The Research Journal of the Costume Culture
• /
• v.3 no.2
• /
• pp.293-306
• /
• 1995

The purpose of this study is to analysis children's measurement and to provide the fundamental information for he clothing design which can reflect the characteristic of their bodies. An anthropometric database used for this study was the 1992 national anthropomatric survey of Koreans. The results obtained are as follows; (1) Children showed the significant difference of their growth in accordance with the increase of their ages. There were also the difference between body and girls. Height, length of items grew most promthy. For example; boys from 10 to 11 and girls from 10 to 11 again their height mostly. (2) In character of body proportion, significant difference were found in accordance with their ages and sex. However, in the items of height, length noticeable changes of proportion could not be found because there were hardly any actual difference of size means while girth items appeared differently. (3) There were significant factors from the result of factor analysis of body dimension. The fist factor ; grith, depth, breath. The second factor ; height, length. (4) We can class three groups with the results of cluster analysis of body dimension.