• Journal of Auto-vehicle Safety Association
• /
• v.12 no.3
• /
• pp.52-60
• /
• 2020

Usage of EDR(Event Data Recorder) report for traffic accident analysis is currently increasing due to government regulation of EDR data release. Nevertheless, a lot of investigators simply adopt by comparing the number of ignition cycles(crash) at event to the number of ignition cycles(download) without an exact judgment whether event data occurred by this accident or not. In the EDR report, besides ignition cycles, there are many factors such as event record type, algorithm active(rear/rollover/side/frontal), time between events, event severity status(rollover/rear/right side/reft side/frontal), belt switch circuit status, driver/passenger pretensioner/air-bag deployment, PDOF(Principal Direction of Force) by ΔV to be able to decide whether or not to adopt. also the event data is considered enough to vehicle damaged state, accident situation at the scene of the accident. and there is described in "all data should be examined in conjunction with other available physical evidence from the vehicle and scene" in the CDR(Crash Data Retrieval) report. Therefore many investigators have to decide whether or not to adopt after they consider sufficiently to above factors when they are the traffic accident analysis and investigate the causes of a accident on the adopted event data. In this paper, we report to traffic accident investigators notable points and analysis methods on the basis of thousands of cases and the results of one's own experiment in NFS(National Forensic Service).

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.79-87
• /
• 2009

The objective of this study is to develop accident scenario models for the risk assessment of railway casualty accidents. To develop these scenario models, hazardous events and hazardous factors were identified by gathering various accident reports and information. Then, the accident scenario models were built up. Each accident scenario model consists of an occurrence scenario model and a progress scenario model. The occurrence scenario refers to the occurrence process of the event before the hazardous event. The progress scenario means the progress process of the event after the hazardous event. To manage a large amount of accident/incident data and scenarios, a railway accident analysis information system was developed using railway accident scenario models. To test the feasibility of the developed scenario models, more than 800 domestic railway casualty accidents that occurred in 2004 and 2005 were investigated and quantitative and qualitative analyses were performed using the developed information system.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.207-216
• /
• 2014

This paper revisits the Fukushima accident to draw lessons in the aspect of nuclear safety considering the fact that the Fukushima accident resulted in core damage for three nuclear power plants simultaneously and that there is a high possibility of a failure of the integrity of reactor vessel and primary containment vessel. A brief review on the accident progression at Fukushima nuclear power plants is discussed to highlight the nature and characteristic of the event. As the severe accident management measures at the Fukushima Daiich nuclear power plants seem to be not fully effective, limitations of current severe accident management strategy are discussed to identify the areas for the potential improvements including core cooling strategy, containment venting, hydrogen control, depressurization of primary system, and proper indication of event progression. The gap between the Fukushima accident event progression and current understanding of severe accident phenomenology including the core damage, reactor vessel failure, containment failure, and hydrogen explosion are discussed. Adequacy of current safety goals are also discussed in view of the socio-economic impact of the Fukushima accident. As a conclusion, it is suggested that an investigation on a coherent integrated safety principle for the severe accident and development of innovative mitigation features is necessary for robust and resilient nuclear power system.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.4
• /
• pp.66-72
• /
• 2021

This study was initiated to improve of the defect investigation method using event data recorders (EDR) and suggested a solution through the regulation and system analysis of EDR. The EDR data has been used for various purposes such as the vehicle defect investigation and the traffic accident investigation. However the EDR regulation has not been updated since the implementation in 2012. "Trigger Threshold" can be used to analyze a single accident such as the frontal crash, the side crash, and the rollover. In the case of a complex accident in which a rollover accident and a crash accident occur simultaneously, it is difficult to analyze a complex accident due to current "Trigger Threshold". This study proposed the method of separating the "Trigger Threshold" into a crash accident and a rollover accident so that accidents can be analyzed using the EDR data even when a complex accident occurs. In addition, it proposed the improvement method to quickly use the data of EDR in accident reconstruction software.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.5 no.2
• /
• pp.35-39
• /
• 2009

In this study, Event Type Analysis System (ETAS) is developed for the accident evaluation in nuclear power plant. The ETAS system can be used in supporting regulator and/or operator under event situation in nuclear power plants. The ETAS system can categorize the all transient events to 3 categories such as Down-2000, Down-2173, and Slow Fluctuation. We develop the program structure for ETAS system and web-based ETAS system. The ETAS system will be used as sub module of Knowledge-Based Event Evaluation Network (K-EvENT) which is developing for the against the accident in nuclear power plants.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1428-1432
• /
• 2007

One of the most important targets of transportation is to transport human and commodities to the destination safely. Railway has low risk, compared with land, ocean and flight route and it assures high security as well as high speed driving, since it runs on regular track. However, train accident may result in tragic accident due to small carelessness, so special event recorder is preferably used in order for clarity of responsibility in case of accident, maintenance of signal device and defect analysis. JRU(Juridical Recorder Unit) for ATC/ATS/ATP can be more advanced event recorder. Event recorder of KTX-I which is running now is installed one by one on each leading car and last car, and operation plan of event recorder in case of single trainset is suggested. But regarding train operation of multi-coupled trainset operation such as KTX-II, more detailed study is required for event recorder revitalization and record data process method. Therefore, this research aims at operation plan used in existing event recorder, and suggests effective operation and management plan of event recorder in multi-coupled trainset such as new High Speed Train.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.190-198
• /
• 2009

This study shows the developing process of the risk assessment models for railway casualty accidents. To evaluate the risks of these accidents, the hazardous events and the hazardous factors were identified by the review of the accident history and engineering interpretation of the accident behavior. The frequency of each hazardous event was evaluated from the historical accident data and structured expert judgments by using the Fault Tree Analysis (FTA) technique. In addition, to assess the severity of each hazardous event, the ETA (Event Tree Analysis) technique and other safety techniques were applied. The risk assessment models developed can be effectively utilized in defining the risk reduction measures in connection with the option analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1245-1255
• /
• 2009

Recently, to analyze the cause of the railway accident objectively and quickly and prevent the accident, many countries are legislating for the installation of the black box what we call an event recorder, which records information about the operation of railway vehicle. Thus, the study of the event recorder has been in progress. Moreover, the analysis software that can analyze and express the stored data in the event recorder is required for the correct decision on the accident. Therefore, in this paper, we presented a design of analysis software which analyzes the data, plays the audio and video in the event recorder system. This software can quickly and accurately identify the cause of the accident and recognize the driving patterns and habits of the driver according to the operating section. In addition, by analyzing the audio and video data simultaneously in the previous accident, we expect that it is possible to prevent accidents in advance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.3
• /
• pp.37-43
• /
• 2007

We use influence diagrams to describe event trees used in safety analyses of low-probability high-risk incidents. This paper shows how the branch parameters used in the event tree models can be updated by a bayesian method based on the observed counts of certain well-defined subsets of accident sequences. We focus on the analysis of the shared branch parameters, which may frequently often in the real accident initiation and propagation to more severe accident. We also suggest the way to utilize different levels of accident data to forecast low-probability high-risk accidents.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1499-1504
• /
• 2008

This study shows risk-based evaluation results of casualty accidents for passengers, railway staffs and MOP(Member of public) on the national railway in South Korea. To evaluate risk of these accidents, the hazardous events and the hazardous factors were identified by the review of the accident history and engineering interpretation of the accident behavior. A probability evaluation model for each hazardous event which was based on the accident appearance scenario was developed by using the Fault Tree Analysis (FTA) technique. The probability for each hazardous event was evaluated from the historical data and structured expert judgment. In addition, the severity assessment model utilized by the Event Tree Analysis (ETA) technique was composed of the accident progress scenarios. And the severity for the hazardous events was estimated using fatalities and weighted injuries. The risk assessment model developed can be effectively utilized in defining the risk reduction measures in connection with the option analysis.