• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.341-348
• /
• 2019

In order to reduce the safety risk of forestry operations, this research was conducted to examine the suitability of chainsaw protective pants after repeated laundering, testing four different products that are currently used in hand-held chainsaw operations. Laundering was repeated 10, 20, 30, 40, and 50 times. After washing, we measured the shrinkage ratio of 17 measurement positions mostly affecting the safety of forest operations and suggested the expected safety life cycle of chainsaw protective clothes. The results showed that most of the products have only one measurement position where the standard shrinkage ratio (<6%) was exceeded after 20 washings, and that the lateral direction of measurement positions shrank more than the vertical one. The numbers of repeated launderings and measurement positions were found to be significant factors influencing the shrinkage ratio (p<0.05). In the shrinkage rates for 17 measurement positions, there were significant correlations between five of the measurement positions (a, b, g, j, and n) and the number of repeated launderings (p<0.05). Therefore, the results suggest that about 10 months would be suitable for an adequate safety lifetime for chainsaw protective pants. The relationship between the number of repeated launderings and the measurement positions will be further analyzed in detail to examine the durability of chainsaw protective pants.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.189-200
• /
• 2019

Korean seafarers have played a key role throughout the country's history and economic development. They have been a major source of foreign remittance into the nation as well as a pivotal sector in emergency logistics during war times. However, the current number of Korean seafarers in decreasing due to low job attractiveness and retention rate onboard. This is a major problem for the national and international shipping industry as youth seem not to be interested in working onboard for long periods of time. The purpose of this study is to 1) determine what the public opinion about seafarers in Korea is and 2) find out what factors mostly stand out in the public opinion about seafarers profession. The paper suggests that three main types of opinion groups emerged. The first type is labeled as 'high risk, high workload and high stress' as respondents recognized a high possibility of accident onboard and, at the same time, acknowledged that seafarers can be fatigued and stressed. The second type was named as 'Dangerous, Dirty, Difficult', as seafarers' image was mainly associated to fishing vessels and not to merchant and passenger ships. The third type recognized that the social position of the seafarers was low due to 'low social recognition'. The study suggests that all three types have a negative image of seafarers' job. Based on the results of this study, it is necessary to establish various policies and marketing tools to improve the negative job image linked to seafarers by the public opinion. If the public image of seafarers can be improved and attractiveness rose, it is expected a higher number of seafarers will pursue and keep a career at sea.

• Quality Improvement in Health Care
• /
• v.24 no.2
• /
• pp.26-40
• /
• 2018

Purpose: The objective of this study was to identify the relationship between knowledge of patient safety, nursing professionalism and patient safety management activities of nursing students with clinical practical experience. Methods: Self-administered questionnaires survey on knowledge of patient safety, nursing professionalism, and patient safety management activities were conducted for the $3^{rd}-year$ and $3^{th}-year$ nursing students. 139 questionnaires were distributed, of which, 131 were used for data analysis. Results: The scores of nursing students' knowledge of patient safety, nursing professionalism and patient safety management activities were $6.76{\pm}1.26$, $65.11{\pm}7.97$ and $67.99{\pm}7.26$, respectively. Knowledge of patient safety differed significantly according to the grade. Nursing professionalism had a difference with major satisfaction, clinical practical satisfaction, and experience of patient safety accident. Patient safety management activities were positively correlated (p<.01) with knowledge of patient safety and nursing professionalism. Patient safety management activities increased significantly with increase in the scores of knowledge of patient safety and nursing professionals. The factors that were related to patient safety management activities of nursing students were knowledge of patient safety and nursing professionalism. Knowledge of patient safety and nursing professionalism were selected as significant variables for explaining the patient safety management activities of nursing students, of which the coefficient of determination was 9.8%. Conclusion: To promote patient safety management activities of nursing students, training programs for patient safety management activities are required. Also, there is the need to increase the knowledge of patient safety and nursing professionalism of nursing students using various educational method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.320-323
• /
• 2014

Today is going with the advancement of intelligent transportation systems and traffic environment and helping to provide safe and convenient service through a mobile device work with the popularization of the vehicle black box. The traffic flow by a variety of causes is constantly changing, it is often unable to prepare the driver, depending on external factors can not be controlled by the power of the public, leading to a major accident. The system needs to pass the real-time weather data in the inter-operator to prevent this. The proposed detection algorithm weather information delivered real-time weather information for this paper. The weather condition is detected by using the contrast between the histogram of the motion of the wiper and the clear day algorithm. In general, the wiper is worked in extreme weather conditions that will have a value different contrast due to rain or snow. Situation was considered clear, snowy conditions, such as using it on a rainy situation. First, designated as ROI (Region Of Interest) of the minimum area that can be detected in order to reduce the amount of calculation for the wiper, the wiper, which was detected through the operation of the threshold Thresholding the brightness of the vehicle wiper. In addition, we distinguish the value of each meteorological situation by using contrast. Results was obtained to 80% for the snow conditions, a rainy situation.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.2
• /
• pp.12-20
• /
• 2021

Unsafe working environments slow down working speed in that it takes a lot of time to respond in case of an accident, greatly reducing the productivity of construction work. Therefore, proper safety management that does not impede the productivity of construction works is a very important factor for successful construction project. However especially in mega project, the mutual effects of safety management and productivity are complex. Therefore, this study establishes a causal model between safety management and productivity influencing factors based on effectiveness metrics, and analyzes the effect of increased site congestion due to excessive personnel input, irregular safety measures and inefficient change of work schedules. The result of this study, is expected to contribute to enhancing the competitiveness of the construction industry as the basis for establishing a safety management plan that can secure appropriate productivity.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.222-234
• /
• 2020

Autonomous vehicles are equipped with a wide rage of sensors such as GPS, RADAR, LIDAR, camera, IMU, etc. and are driven by recognizing and judging various transportation systems at intersections in the city. The accident ratio of the intersection of the autonomous vehicles is 88% of all accidents due to the limitation of prediction and judgment of an area outside the sensing distance. Not only research on non-signalized intersection collision avoidance strategies through V2V and V2I is underway, but also research on safe intersection driving in failure situations is underway, but verification and fragments through simple intersection scenarios Only typical V2V failures are presented. In this paper, we analyzed the architecture of the V2V module, analyzed the causal factors for each V2V module, and defined the failure mode. We presented intersection scenarios for various road conditions and traffic volumes. we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to analyze the risk of autonomous vehicle based on the simulation. We presented ASIL, which is the result of risk analysis, proposed a monitoring concept for each component of the V2V module, and presented monitoring coverage.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.331-341
• /
• 2020

Objectives: This study was conducted to evaluate perceptions of safety and risk among Korean industrial hygienists and the change between before and after the Sewol Ferry Disaster in 2014. Two surveys with questionnaires composed of 51 questions were completed by attendees of the Korea Industrial Hygiene Association(KIHA) conference. Methods: One was conducted at the 2013 KIHA Fall Conference(N=181) and the other was from the 2014 KIHA Summer Conference(N=123). Between these two surveys was the Sewol Ferry Disaster on April 14, 2014, which was believed to seriously affect safety and risk perceptions in Korea. Results: It was revealed that industrial hygienists' awareness of safety rules strengthened after the Sewol Ferry Disaster(p<0.05). It was apparent that people over the age of 30 were more sensitive to social safety. There was no significant difference in the evaluation and attitude regarding governmental safety policy between the years of 2013 and 2014. The credibility of public organizations responsible for the disaster management system decreased. The self-evaluation of respondents' safety level also decreased. This trend shows mainly in the younger generation. It was evaluated that the overall social safety level decreased and the anxiety level increased. The score on social safety on a ±5 Likert scale was 0.68 in the 2013 survey and -0.33 in the 2014 survey(p<0.05). It was reported that the most serious threat factors for accident or disaster were 'building collapse > illegalities and corruption > side effects of radiation therapy >accidents in normal activity > occupational disease,' in order. They picked 'safety ignorance > hurry-up habits and culture > focusing on short-term benefit > easy-going attitude > insufficient safety education' for the causes of low social safety levels in 2013. In 2014, they were 'safety ignorance > easy-going attitude > focusing on short-term benefit > insufficient safety education > hurry-up habits and culture'. Conclusions: This study has some limitations because it was originally not designed to survey attitudes prior to the Sewol Ferry disaster in 2013. In addition, the survey targets are industrial hygienists who are familiar with occupational disease and injury.

• Journal of Biomedical Engineering Research
• /
• v.42 no.6
• /
• pp.259-267
• /
• 2021

Recently, the market for personal health care and medical devices based on Bluetooth Low Energy(BLE) has grown rapidly. BLE is being used in various medical data communication devices based on low power consumption and universal compatibility. However, since data errors occurring in the transmission of medical data can lead to medical accidents, it is necessary to analyze the causes of errors and study methods to reduce data error. In this paper, the minimum communication speed to be used in medical devices was set to at least 800 byte/sec based on the wireless electrocardiography regulations of the Ministry of Food and Drug Safety. And the data loss rate was tested when data was transmitted at a speed higher than 800 byte/sec. The factors that cause communication data error were classified, and the relationship between each factor and the data error rate was analyzed through experiments. When there were two or more activated peripherals connected to the central, data error occurred due to channel hopping and bottleneck, and the data error rate increased in proportion to the communication distance and the number of activated peripherals. Through this experiment, when the BLE is used in a medical device that intermittently transmits biosignal data, the risk of a medical accident is predicted to be low if the number of peripherals is 3 or less. But, it was determined that BLE would not be suitable for the development of a biosignal measuring device that must be continuously transmitted in real time, such as an electrocardiogram.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.918-927
• /
• 2022

The purpose of this study was to investigate the causes of collisions by examining 668 cases of merchant ship collision accidents that occurred during the past 12 years (2010-2021) and analyzed them statistically. Further, the analysis results were applied to propose a human error prevention collision avoidance (HEPCA) model. The statistical annual report of the Korea Maritime Safety Tribunal (KMST) and the collision investigation report were investigated to collect data on the causes of collisions of merchant ships, and frequency analysis was performed using the statistical analysis tool, SPSS Statistics. In the first-stage analysis, the causes of collisions were analyzed targeting 668 merchant ship collision accidents, and in the second-stage analysis, the identified maximum frequency cause factors were analyzed in detail. The analysis results identified that 98 % of the cause of the collision was the human error of the navigator, and the highest frequency was in the order of neglect of look-out > violation of navigation regulations > improper maneuvering. The cause of the neglect of look-out was mainly neglecting continuous monitoring after the first recognition of the target ship. The HEPCA model for human error prevention was proposed by applying the analysis results to the collision case of the investigation report. The results of this study are expected to be used as educational materials at marine navigator educational institutions and in practice for avoiding collisions caused by human errors of navigators.

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.207-215
• /
• 2021

A forklift is an industrial vehicle with a power-operated fork for lifting and moving heavy loads over short distances. A significant number of accidents are caused by forklifts every year. Most of them are known to be caused by the unsafe acts of workers. However, only a few studies have focused on the risks of forklift work from the perspective of human error. In addition, various methods have been developed to analyze the risk of human error, while it is hard to find studies that directly compare the effectiveness or strengths/weaknesses of those methods. This study aims to analyze risk factors related to unsafe behavior in forklift operations using two representative human error analysis techniques, i.e., .SHERPA and HE-HAZOP, and compare their advantages and disadvantages. The analysis was performed on three main forklift operations ('unloading from the truck', 'moving and loading into the storage', and 'loading on the truck'). As a result, 118 errors and 34 remedial measures were derived by SHERPA. Through HAZOP, 139 errors and 54 measures were derived. The two techniques were compared in terms of the number of results and the method of deriving errors and remedial measures, cause analysis, and risk assessment. This study might be used to reduce human error related disasters in workplaces using forklifts. In order to provide a guide for choosing an appropriate analysis method, more comparative studies on different techniques involving wide range of tasks are needed in the future.