• 한국조경학회지
• /
• 제31권4호
• /
• pp.57-66
• /
• 2003

The purpose of this study is to evaluate the resource value of existing mud flats in JANGWHARI, KANGWHADO, as strategies for ecotourism. The research methods used in this study are Limits of Acceptable Change(LAC), and Recreation Opportunity Spectrum(ROS). The LAC process draws attention to the existing area conditions that are judged to be acceptable. Managers must define desired area conditions and undertake actions to maintain or achieve these conditions. The ROS is within each of the recreation opportunity classes identified as being used at the regional level. The Results of this study are as follows: 1) The Opportunity Class of the ROS is ecological, physical, social, managerial setting as primitive, semi-primitive. non-motorized, semi-primitive$.$motorized, and roaded natural. 2) The indicator of the LAC is ecological, physical, social, and managerial setting; the indicator of ecological is wildlife populations, water quality, road paving; the indicator of physical is facilities; the indicator of social is visitor needs for knowledge, adventure, eco-experience, and environmental education programs; and, the indicator of managerial is limits of law, and degree of management. 3) Currently, the Opportunity Class of the ROS of JANGWHARI, KANGWHADO is levels II-III, and the Opportunity Class of the suggested ROS is levels I-II. 4) This paper describes strategies for mud flat area management: detection of water quality, resolving problems of equipment, supply of both environmental education programs and guide equipment.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.365-369
• /
• 2006

It is concentrated on a methodology to establish a scheme of investment on power distribution systems of components. This paper provides a methodology to estimate the scheme as using a customer interruption cost regarding reliability indices in power distribution systems. The proposed method basically uses the failure rate depending on time for explaining the deterioration of a component. Therefore, the theory of the sensitivity is used for deciding the precedence of the investment to consider an effect of each component's failure rate on the system reliability. After Estimating the sensitivity on component investment cost making incremental reliability level is produced by component's investment cost accumulated according to the precedence of the sensitivity. After that, the failure rate corresponding with reliability level on the curve of investment cost is used as producing the curve of customer interruption cost. Two curves have the crossing point that is proposed to acceptable reliability level for customer and utility. In this paper, the acceptable reliability level for customer with the utility is assessed to analyze customer interruption cost and sensitivity of reliability indices. In conclusion the result of investment based on this method is shown to the reliability level with two cost.

• Journal of Preventive Medicine and Public Health
• /
• 제38권1호
• /
• pp.61-70
• /
• 2005

Objectives : To develop a tool for multidimensional measurement of the quality of life, which was psychometrically sound, short, and easy to administer for patients with hypertension. Methods : A sample of 1,115 hypertensive patients aged 20 or above in Cheong-Song County was studied from June 1997 to October 1998. In the development of the instrumental stage, the authors first conceptualized the quality of life. Item generation, item reduction, and questionnaire formatting were followed. Item-level (item descriptive, missing%, item internal consistency, item discriminant validity) analysis, scale-level (scale descriptive, floor and ceiling effect) analysis, and other tests(Cronbach's alpha, inter-dimension correlations, factor analysis, clinical validity) were performed to evaluate the validity and reliability of the new measurement scale. After 1 year, responsiveness and confirmatory factor analysis were performed. Results : The results of both item-level and scale-level analyses were acceptable. An acceptable degree of internal consistency was observed for each of the dimensions (Cronbach's alpha was 0.60 or higher). Inter-dimension correlations were below 0.50 and the factor analysis result was the same as the intended dimension structure. Correlation coefficients between perceived health status, stress and dimensions were proven to be acceptable. The result of comparing dimensional score means among ADL and MMSE-K groups above 60 years was statistically significant(p<0.05). The result of confirmatory factor analysis concluded that the dimensional structure model was well fitted. However, the result of responsiveness test using sensitivity and specificity was unsatisfactory. Conclusions : The newly developed measurement scale is psychometrically reliable and valid instrument for measuring quality of life in hypertensive patients.

• 한국포장학회지
• /
• 제19권2호
• /
• pp.109-115
• /
• 2013

국내 유리병 포장의 개선 방향을 제시하기 위하여 유리병 경량화 지수를 이용하여 유리병 재질 사용 원천 감량을 위한 적정 기준을 설정하였다. 제품의 구분은 사용목적과 사용시간에 따라 일회용병과 다회에 걸쳐 장기간 두고 쓰는 반복사용병(returnable bottle) 및 장기보관 사용 일회용 유리병으로 구분하여 설정하였다. 재사용병의 대부분은 권고기준을 충족하고 있는 것으로 나타났으나 해외 제품의 경우 같은 품목임에도 지수가 최적기준에 준하는 수치를 보여 현저하게 낮은 지수를 보였다. 일회용 유리병 중 소용량 드링크류 유리병은 권고기준을 충족하지 못하여 감량할 필요성이 있는 품목군으로 판단된다. 반면 일회용 유리병 중 180 ml 주스류에 해당되는 품목은 평균적으로 권고기준에 가까운 지수를 보였다. 분석 결과, 해외 제품에 비해 국내 제품의 유리병 경량화 지수가 커 상대적으로 무거운 유리병을 사용하고 있는 것으로 나타나 경량화를 위한 노력이 필요하다고 판단된다. 일본의 경우 일본 유리병 재활용 촉진 협의회를 중심으로 유리병 경량화 지수를 이용하여 유리병의 친환경성을 평가하고 있다. 국내에서 업계의 자발적인 감량화 노력을 유도하는 협의회 구성이 필요하며 경량병 사용시 불이익 발생하지 않는 기술력을 확보해야 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.876-878
• /
• 2008

The standards of acceptable limit and compensation is one of the most important things in environmental noise and vibration disputes resolution. In this paper, review on the present acceptable limit level and compensation standard in National Environmental Dispute Resolution Commission is introduced. Discordance of standards between in the regulation law and in the dispute resolution commission and it's improvement are discussed. Abnormal reasoning for compensation standards is pointed out from a author's private view.

• Journal of Radiation Protection and Research
• /
• 제15권2호
• /
• pp.67-74
• /
• 1990

토양오염의 기준치를 계산하기 위한 피폭경로 모델을 설정하고 계산방법을 설명하였다. 피폭경로는 음식물 섭취에 의한 섭식경로와 재부유물질의 호흡 및 지표로부터 직접 외부 피폭경로로 나누어 고찰하였다. 한국적인 지역특성 자료를 이용하여 계산한 결과를 다른 연구자의 결과들과 비교하고 문제점을 고찰하였다.

• 한국통신학회논문지
• /
• 제37A권10호
• /
• pp.809-814
• /
• 2012

본 논문은 멀티레벨을 가지는 홀로그래픽 저장 장치에서 EM (Expectation-maximization) 알고리즘을 이용한 적응 문턱전압검출기를 제안한다. 멀티레벨을 이용한 홀로그래픽 저장 장치의 경우 DC 오프셋의 정도에 따라 비적응 문턱전압검출기의 성능에 매우 심각한 영향을 미친다. EM 방법은 채널을 통과한 데이터를 이용해 Expectation step과 maximization step을 반복하면서 평균과 분산을 추정하는 방법이다. DC 오프셋이 있는 상황에서 제안된 방법을 적용하여 문턱값을 찾아내서 검출한 결과 일정한 한도 내의 DC 오프셋의 경우는 DC 오프셋이 없는 경우와 동일한 성능을 보였다.

• Journal of applied mathematics & informatics
• /
• 제42권2호
• /
• pp.257-281
• /
• 2024

In real life, a decision-maker can assign multiple values for pairwise comparison with a certain confidence level. Studies incorporating multi-choice parameters in multi-criteria decision-making methods are lacking in the literature. So, In this work, an extension of the Best-Worst Method (BWM) with multi-choice pairwise comparisons and multi-choice confidence parameters has been proposed. This work incorporates an extension to the original BWM with multi-choice uncertainty and confidence level. The BWM presumes the Decision-Maker to be fully confident about preference criteria vectors best to others & others to worst. In the proposed work, we consider uncertainty by giving decision-makers freedom to have multiple choices for preference comparison and having a corresponding confidence degree for each choice. This adds one more parameter corresponding to the degree of confidence of each choice to the already existing MCDM, i.e. multi-choice BWM and yields acceptable results similar to other studies. Also, the consistency ratio remained low within the acceptable range. Two real-life case studies are presented to validate our study on proposed models.

• Smart Structures and Systems
• /
• 제11권5호
• /
• pp.453-476
• /
• 2013

DuraMote is a remote sensing system developed for the "NIST TIP project: next generation SCADA for prevention and mitigation of water system infrastructure disaster". It is designed for supervisory control and data acquisition (SCADA) of ruptures in water pipes. Micro-electro mechanical (MEMS) accelerometers, which record the vibration of the pipe wall, are used detect the ruptures. However, the performance of Duramote cannot be verified directly on a water distribution system because it lacks an acceptable recordable level of ambient vibration. Instead, a long-span cable-stayed bridge is an ideal test-bed to validate the accuracy, the reliability, and the robustness of DuraMote because the bridge has an acceptable level of ambient vibration. The acceleration data recorded on the bridge were used to identify the modal properties of the structure and to verify the performance of DuraMote. During the test period, the bridge was subjected to heavy rain, wind, and a typhoon but the system demonstrates its robustness and durability.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.71-84
• /
• 1993

Currently the problem of air pollution caused by the motor vehicle emission is one of the most serious problems to be solved. Thus we needed the vehicle emissions audit procedure and technical innovation constraining the motor vehicle emission. The Korean Environmental Protection Agency currently audits automobiles for emissions compliance at assembly plants with multiple attribute multiple staged sampling plans. In order to establish the more reasonable audit procedure, the multiple staged sampling plan designed in this paper has been applied to the domestic vehicles by analyzing the statistic characteristics of the emission distribution. This paper summarizes the auditing procedure and develops methods for determining its statistical characteristics. Specifically, we consider how to evaluate a multiple staged sampling plan, give a procedure that efficiently estimates attribute-type probabilities from multivariate variables-type data, and quantify the effect of tightening the acceptable quality level of the sampling plan. As a result it can be proved that this audit procedure is the reasonable plan minimizing the AQL (Acceptable Quality Level) and is to be used effectively for the auditing procedure constraining the injurious gasses of the motor vehicles.