• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1355-1360
• /
• 2008

Stainless steel sheets are widely used as the structure material for the railroad cars and the commercial vehicles. These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding. Gas welding is very important and useful technology in fabrication of an railroad car and vehicles structure. However fatigue strength of the gas welded joints is considerably lower than parent metal due to stress concentration at the weldment, fatigue strength evaluation of gas welded joints are very important to evaluate the reliability and durability of railroad cars and to establish a criterion of long life fatigue design. In this paper, ${\Delta}P-N_f$ curve were obtained by fatigue tests. Using these results, the accelerated life test (ALT) is conducted. From the experimental results, an acceleration model is derived and acceleration factors are estimated. So it is intended to obtain the useful information for the fatigue lifetime of plug and ring gas welded joints and data analysis by statistic reliability method, to save time and cost, and to develop optimum accelerated life prediction plans.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.1-8
• /
• 2011

Stainless steel sheets are widely used as the structure material for the railroad cars and the commercial vehicles. These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding. Gas welding is very important and useful technology in fabrication of an railroad car and vehicles structure. However fatigue strength of the gas welded joints is considerably lower than parent metal due to stress concentration at the weldment, fatigue strength evaluation of gas welded joints are very important to evaluate the reliability and durability of railroad cars and to establish a criterion of long life fatigue design. In this paper, ${\Delta}-N_f$ curve were obtained by fatigue tests. Using these results, the accelerated life test (ALT) is conducted. From the experimental results, an acceleration model is derived and acceleration factors are estimated. So it is intended to obtain the useful information for the fatigue lifetime of plug and ring gas welded joints and data analysis by statistical reliability method, to save time and cost, and to develop optimum accelerated life prediction plans.

• Tribology and Lubricants
• /
• 제30권5호
• /
• pp.271-277
• /
• 2014

Hydraulic reciprocating seals have been widely used to prevent fluid leakage and to provide lubricant film on counter surface in various hydraulic system. The degradation of the seal may cause the catastrophic failure of the hydraulic system. To assess the durability of the seals and the compatibility with counter surface, accelerated life testing (ALT) has been typically employed from industry. However, ALT often takes up to a few months to cause a failure of the seals, and therefore, there is a need to develop more efficient ALT methods. In this work, the degradation characteristics of polyurethane (PU) seals from field test are investigated and they are compared to those from the component and bench tests, with an aim to contribute to the development of ALT method. From the comparison of the cross-sectional profiles of the sealing surface of the PU specimens before and after the tests, both wear and compression set are found to be responsible for degradation of the PU seals. It is also shown that the major wear mechanisms of the PU seals from the field is abrasive wear and formation of pits. The component and bench tests performed in this work are shown to reproduce such wear mechanisms, and therefore, those test methods can be used as an ALT method for PU seals. In particular, the bench test proposed in this work may be effectively utilized to assess the durability and the compatibility of the seals with the counter surface. The results of this work are expected to aid in the design of ALT for PU seal.

• 한국산업정보학회논문지
• /
• 제9권2호
• /
• pp.1-8
• /
• 2004

본 논문은 누적노출모형에서 수명시간이 지수분포를 따르고 서로 독립일 때 쿨백-라이블러 정보함수를 이용하여 단계 스트레스 가속수명시험으로부터 얻은 자료로부터 모수의 추정량을 제안하고, 단계 스트레스 가속수명시험의 정상조건에서 편의와 평균제곱오차 관점에서 모의실험을 통하여 Vasicek (1976), Van Es (1992)와 Correa (1995)가 제안한 세가지 추정량들에 대한 소표본 특성을 비교 논의하고자 한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.77-79
• /
• 2009

The paper is to evaluate for reliability of 4W LED Lamp using internal converter by ALTs(Accelerated Life Tests). The recently, some of KS were established by law of LED Modules for Lighting(KS C 7651, 7652, 7653, 7655, 7656, 7657, 7658 and 7659), but reliability assessment methods of LED Lamps had not been established. Therefore, the paper aided companies to perform accelerated life testing(temperature 60 $^{\circ}C$, humidity 90 %) for themselves.

• 대한산업공학회지
• /
• 제36권4호
• /
• pp.212-218
• /
• 2010

This paper shows accuracy comparison results of reliability estimation methods for one-shot systems with respect to sample sizes. To compare accuracy in reliability estimation methods, quantal-response data, characterizing one-shot systems, were simulated using failure times of LED obtained through the accelerated life test, and then the true reliability over time was evaluated using the failure times. The simulated quantal-response data were used to estimate the true reliability through applying reliability estimation methods in open literature. Accuracy of each reliability estimation method was compared in terms of both SSE (Sum of Squared Error) and MSE (Mean Squared Error), and then estimation trend for each method is found. Feasible bounds which true reliability would exist within were estimated through applying the found trends to quantal-response data set of a real weapon system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권1호
• /
• pp.52-59
• /
• 2015

In this Study, we tested electroluminescent film to accelerate life by temperature, humidity, voltage, and frequency. We analyzed brightness data to estimate activation energy and verify it's suitability. All of the tests performed in operating condition. Because electroluminescent film is mostly degraded by fluorescent in operating condition. Two different sample groups were tested and compared to find common parameter.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.384-389
• /
• 2008

An accelerated fatigue test is essentially required to maintain the reliability of the actual structure of KTX under operation conditions. However, actual fatigue life cannot be obtained if specimens are not adequate to the conventional fatigue test. Moreover component maker did not provide data of loading stress (S) - cycles at the failure (N). In this study, we suggest a prediction method of the S-N curve for establishing an accelerating test under various load levels. Load history was acquired from the field tests. A Rainflow method was used on the cycle counting of the field load data, and then, an S-N curve was obtained through the iteration process under the condition that the damage index satisfies to 1 in the Miner's rule.

• International Journal of Reliability and Applications
• /
• 제15권1호
• /
• pp.23-50
• /
• 2014

This paper deals with formulation of optimum multi-objective modified step-stress accelerated life test (ALT) plan for Burr type-XII distribution under type-I censoring. Since it is impractical to estimate only one objective parameter after conducting costly ALT tests; also, it is not desirable to assume instantaneous changes in stress levels because of limited capacity of test equipments and the presence of undesirable failure modes, therefore, an optimum multi-objective modified step-stress ALT plan has been designed. The optimal test plan consists in determining the optimum low stress level and optimal time at which stress starts linearly increasing from low stress by minimizing the weighted sum of the asymptotic variances of the maximum likelihood estimator of quantile lifetimes at design constant stress. The method developed has been illustrated using an example. Sensitivity analysis has been carried out. Comparative study has also been done to highlight the merits of the proposed model.

• Journal of the Korean Data and Information Science Society
• /
• 제23권4호
• /
• pp.843-850
• /
• 2012

The inferences of data obtained from periodic inspection and type I censoring for the three step stress accelerated life test are studied in this paper. The failure rate function that a log-quadratic relation of stress and the tampered failure rate model are considered under the exponential distribution. The optimal stress change times which minimize the asymptotic variance of maximum likelihood estimators of parameters is determined and the maximum likelihood estimators of the model parameters are estimated. A numerical example will be given to illustrate the proposed inferential procedures.