• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.139-144
• /
• 2015

Track drive unit adopted in the small sized excavator generally have been used in the construction equipment under the 10 tons as the driving device with forwarding and reversing of excavator. It is required to study the accelerated life test applied by over torque and speed to test the durability life test reflected the many driving modes of small sized excavator and also need to equip the comprehensive performance and life test equipments to do the various performance tests. This study had analyzed the failure modes of the components, and calculated the equivalent loads investigated the used loads in the real field conditions and elicits the acceleration factor adopted in the inverse power model. Also, this study have considered the changes of the acceleration factor and the durability test time in the case of the rotary group and the bearing through analyzing the main failure modes. It was calculated the no failure test time about 2 samples and confidence level 90% and elicited the accelerated life time 720 hours.

• International Journal of Automotive Technology
• /
• 제3권4호
• /
• pp.129-135
• /
• 2002

Durability estimation of a prototype vehicle has traditionally relied heavily on accelerated durability tests using predefined proving grounds or rig tests using a road simulator. By use of those tests, it is very difficult to predict durability failures in actual service environments. This motivated the development of an integrated CAE (Computer Aided Engineering) methodology for the durability estimation of a prototype vehicle in actual service environments. Since expensive computational costs such as computation time and hardware resources are required for a full vehicle simulation in those environments with a very long span of event time, the conventional CAE methodologies have little feasibility. An efficient computational methodology for durability estimations is applied with theoretical developments. The effectiveness of the proposed methodology is shown by the comparison of results of the typical actual service environment such as the city mode with those of the typical accelerated durability test over the Belgian road.

• Journal of the Korean Statistical Society
• /
• 제18권2호
• /
• pp.125-134
• /
• 1989

This paper presents optimum simple step-stress accelerated life test plans for the case where the test process is observed periodically at intervals of the same length. Two types of failure data, periodically observed complete data and periodically observed censored data, are considered. An exponential life distribution with a mean that is a log-linear function of stress, and a cumulative exposure model for the effect of changing stress are assumed. For each type of data, the optimum test plan which minimizes the asymptotic variance of the maximum likelihood estimator of the mean life at a design stress is obtained and its behaviors are studied.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권2호
• /
• pp.221-239
• /
• 2005

General chip SMD parts(chip resistance, chip capacitor, chip varistor etc.) are very wide used electronics parts for IT units. But, failure modes are indistinct for these chip parts. In factory and field the failure modes are recognized to accidental failure mode caused by potential defect. In this paper used chip varistor ALT(Accelerate Life Test) test for verify general failure modes in chip SMD parts. Also the results are useful for general chip SMD ALT tests.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.51-67
• /
• 2005

General chip SMD parts(chip resistance, chip capacitor, chip varistor etc.) are very wide sed electronics parts for IT units. But, failure modes are indistinct for these chip parts. In factory and field the failure modes are recognized to accidental failure mope caused by potential defect. In this paper used chip varistor ALT(Accelerate Life Test) test for verify general failure modes in chip SMD parts. Also the results are useful for general chip SMD ALT tests.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.343-354
• /
• 2017

Purpose: This paper evaluates the reliability of tapered grid couplings and presents test results through performance and life tests. Methods: The performance and life test method were presented by analyzing the failure modes for the tapered grid coupling. Zero failure test time was calculated to evaluate the reliability of tapered grid couplings and the test was performed under accelerated conditions. The nondestructive test and wear analysis using weighing were also carried out to check the failure modes of the field conditions. Conclusion: This study can be provided to improve the product reliability through failure analysis of a tapered grid coupling. The performance test results of before and after the accelerated life test were presented to confirm the improved reliability of the tapered grid coupling.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.23-29
• /
• 2018

The objective of this paper is to evaluate the reliability of a volute pump and presents test results through performance and life tests. The performance and life test methods were presented by analyzing the failure modes of the volute pump. Zero failure test time was calculated to evaluate the reliability of the volute pump and then, the test was performed under accelerated conditions. The test was also carried out to check the failure modes of the field conditions. This study can be provided to improve the product reliability through failure analysis of the volute pump. And failure cause of typical failure case has been investigated and improvement design has been presented. The performance test results of before and after the accelerated life test were presented to confirm the improved reliability of the volute pump.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.241-248
• /
• 2019

In this paper, we aim to check the reliability growth of multiple launch rocket components by the life evaluation. We apply the Crow-AMSAA model to the sets of test data obtained from the development phase. The result of the data analysis shows that the reliability of some components needs to be improved. In order to improve their reliability, we analyze the failure mechanism and change their designs. The verification of the reliability growth for those components is done by analyzing the data sets obtained by the accelerated life tests. As a result, we show that the MTBF of those components is increased and also their reliabilities improved.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.393-397
• /
• 2006

신제품에 대한 개발 주기가 짧아지고 있는 현시점에서 제품의 수명을 예측하고 평가하기 위한 방법으로 가속 수명시험과 시험을 통해 관측된 고장 데이터의 분석에 대한 관심이 증대되고 있다. 이에 따라 가속 수명시험을 위한 시험 조건과 고장 데이터의 정확한 분석을 위한 고장 데이터의 최적 분포 결정 방법에 대한 관심 또한 증대되고 있다. 따라서 본 논문에서는 고장 데이터를 기반으로 신뢰성 예측을 할 때 사용하는 분포 함수 결정을 위한 방법으로 관측된 고장 데이터만의 분포를 고려하는 Anderson-Darling 방법과 관측된 고장 데이터의 수명-스트레스 관계식을 적용하여 고장 데이터의 분포를 결정하는 Likelihood Function 방법을 비교한다. 두 가지 방식을 비교한 결과 각 방식에 의해 선택되는 최적분포가 다르며, 따라서 각 방식에 의해 선택된 최적 분포에 의해서 예측되는 수명도 다름을 알 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.624-630
• /
• 2006

본 논문은 열차제어시스템의 하부구성요소단위 예측신뢰도를 가속스트레스시험을 통해 입증하기 위한 모델링을 연구한다. 예측신뢰도의 입증을 위해서는 전체시스템단위 시운전과 하부구성요소단위 가속수명시험 및 가속스트레스 시험을 통한 방법이 있으며, 본 논문에서는 하부구성요소단위로 정해진 시간동안 가속된 스트레스를 주입하여 장치의 생존여부에 따라 예측신뢰도를 입증하는 가속스트레스 시험을 위한 열차제어시스템의 모델링을 연구하였다. 전자부품으로 구성된 열차제어시스템은 사용온도에 따라 신뢰도가 급격하게 변화한다는 점에 착안하여 아레니우스 방정식 및 전자부품 활성화에너지를 고려하였으며, 가중평균을 사용한 신뢰성시험 모델링을 제시하여 열차제어시스템 가속스트레스시험의 시험시간을 산출하였다.