• 상하수도학회지
• /
• 제22권4호
• /
• pp.413-420
• /
• 2008

In order to utilize cinder melting slag as a filter media to control the quality of early rainwater, its environmental stability was verified by heavy metal elution experiment and improved by pre-treatment. Possibilities of improving its function as an absorbent was considered. Absorption characteristics of melting slag before and after the pre-treatment were analyzed by heavy metal equilibrium and stationary-phase column experiments, which in turn were analyzed by comparison experiment with activated carbon. As a result of heavy metal elution experiment, every metal item existed in a much lower amount than the criteria or was not detected, implying that there is no problem recycling it. Absorption equilibrium experiment showed that the time for pre-treatment melting slag to reach the equilibrium was reduced, while the absorbed amount was greatly increased. Stationary-phase column experiment assures us that the elimination rate was not changed much by influx rate, pH and the change in packing volume rate, indicating that this melting slag can be used not only as a filter media to control the quality of early rainwater but also in many areas of water-processing.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.861-865
• /
• 2002

A sensitive method for the determination of trace copper(II) after the preconcentration by adsorbing its cupferron complex onto microcrystalline benzophenone was developed.Several experimental conditions such as the pH of sample solution,concentration of cupferron, amount of benzophenone and atirring time were optimized. Trace compper(II) in 100mL solution was chelated with $3.0\;{\times}\;10^3$ M cupferron at pH 5.0. After 0.20g benzophenone, The benzophenone adsorbing Cu-cupferron complex was filtered and then Cu-cupferron complex was desorbed in 10 mL ethanol. Copper was determined by a flame atomic absorption spectrophotomethry. The interfering effects of diverse concomitant ions were investigated. Fe(III) interfered seriously with, but the interference by Fe(III) was completely eliminated by adjusting the concentration of copferron to $5.0\;{\times}\;10^3$ M. The detection limit of this method was 8.6${\times}$10 M(5.5 ngmL$^1$). Recoveries of 97% and 96% were obtained for Cu(II) in a stream water and a brass sample, respectively. Based on the results from the experiment. this proposed technique could be applied to the determination of copper(II) in real samples.

• Bulletin of the Korean Chemical Society
• /
• 제24권5호
• /
• pp.593-599
• /
• 2003

The nanoparticle magnetite of which diameter was about 3 nm was synthesized in a homogeneous aqueous solution without a template. The synthesized magnetite nanoparticle was easily oxidized to maghemite in an ambient condition. The magnetic properties of the ferrite nanoparticle show superparamagnetism at room temperature and its blocking temperature is around 93 K. Modifying the sequential adsorption method of metal bisphosphonate, we have prepared a multilayer thin film of the ferrite nanoparticle on planar substrates such as glass, quartz and Si wafer. In this multilayer the ferrite nanoparticle layer and an alkylbisphosphonate layer are alternately placed on the substrates by simple immersion in the solutions of the ferrite nanoparticle and 1, 10-decanediylbis (phosphonic acid) (DBPA), alternately. This is the first example, as far as we know, of nanoparticle/alkyl-bisphosphonate multilayer which is an analogy of metal bisphosphonate multilayer. UV-visible absorption and infrared reflection-absorption studies show that the growth of each layer is very systematic and the film is considerably optically transparent to visible light of 400-700 nm. Atomic force microscopic images of the film show that the surface morphology of the film follows that of the substrate in μm-scale image and the nanoparticle-terminated surface is differentiated from the DBPA-terminated one in nm-scale image. The magnetic properties of this ferrite/DBPA thin film are almost the same as those of the ferrite nanoparticle powder only.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.174-178
• /
• 2017

The reactions of thermal hydrogen atoms H(g) with the Ge(100) surface were examined with temperature-programmed desorption (TPD) mass spectrometry. Concomitant $H_2$ and $CH_4$ TPD spectra taken from the H(g)-irradiated Ge(100) surface were distinctly different for low and high H(g) doses/substrate temperatures. Reactions suggested by our data are: (1) adsorbed mono(${\beta}_1$)-/di-hydride(${\beta}_2$)-H(a) formation; (2) H(a)-by-H(g) abstraction; (3) $GeH_3$(a)-by-H(g) abstraction (Ge etching); and (4) hydrogenated amorphous germanium a-Ge:H formation. While all these reactions occur, albeit at higher temperatures, also on Si(100), H(g) absorption by Ge(100) was not detected. This is in contrast to Si(100) which absorbed H(g) readily once the surface roughened on the atomic scale. While this result is rather against expectation from its weaker and longer Ge-Ge bond as well as a larger lattice constant, we attribute the absence of direct H(g) absorption to insufficient atomic-scale surface roughening and to highly efficient subsurface hydrogenation at moderate (>300 K) and low (${\leq}300K$) temperatures, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1177-1180
• /
• 2003

Thallium is quantitatively retained by 1,10-phenanthroline and tetraphenylborate onto benzophenone in the pH range 0-11 from a large volumes of aqueous solutions of various samples. After filtration, the solid mass consisting of thallium complex and benzophenone is dissolved with 5 mL of dimethylformamide and the metal was determined by flame atomic absorption spectrometric. About 0.4 ㎍ of thallium can be concentrated from 400 mL of aqueous sample, where its concentration is as low as 1.0 ng/mL. Eight replicate determinations of 8.0 ㎍/mL of thallium in final dimethylformamide solution gave a mean absorbance of 0.160 with a relative standard deviation of 1.7%. The sensitivity for 1% absorption was 0.22 ㎍/mL. The interference of a large number of anions and cations has been studied and the optimized conditions developed were utilized for the trace determination of thallium in various alloys and biological samples.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.46-47
• /
• 1982

1. The physical and anatomical properties investigated in this study are the ones, which may give more effect on absorption of preservatives, such as variation of annual ring, specific gravity, shrinkage, E.M.C. of desorption and adsorption at 70 percent relative humidity condition, general and minute properties of wood. 2. On this study, the positive effects of wood structure, in particular, the appearances of tyloses in vessel element upon the absorption of creosote were observed. 3. Thirteen percent sodium chloride solution treatment and boiling hot water treatment have shown poor results to improve the preservative absorption characteristics of tested species however, some slight difference between treated and control could be seen. (see Tables 6 and 7).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.73-74
• /
• 2013

In this study, we examined the properties of the concrete for the adsorption of carbon dioxide by adding in photosynthetic bacteria. As for the experimental plan, we measured slump, carbon dioxide concentration and compressive strength. The findings revealed the non-plastic cement added with photosynthetic bacteria had the greatest flexibility and showed carbon dioxide absorption and condensation delay due to the sugar constituents of photosynthetic bacteria. Giver the progress in the studies on the strength development, it is estimated to be used as CO₂ reduction concrete.

• Applied Biological Chemistry
• /
• 제15권3호
• /
• pp.229-240
• /
• 1972

토성에 따라 합리적인 PCP시용량을 결정하고 아울러 어독해의 추정으로 무어독 처리방법을 강구하기위한 기초자료를 얻고자 물리 화학적 성질을 달리하는 수종의 충북지방 답토양을 시료로 하여 PCP의 흡착관계를 살펴본바 그 결과는 다음과 같다 1. 토양의 점토함량, 전질소, 유기물, CEC, 치환성염기, 인산흡수계수등과 PCP 흡착과의 사이에는 正의 상관이, pH와는 부(負)의 상관을 보여 주었으나 모두 유의성은 인정되지 않았다. 그러나 점토함량, $H^+$, Mg 및 CEC와 PCP흡착과는 비교적 큰값을 보여주어 주목할만한 일이었다. 2. 토성별로 PCP흡착은 식토>양로>사질양토의 순이었다. 3. $H_2O_2$처리 토양에서의 PCP흡착은 현저하게 저하하지만 그 줄어든 비율은 부식의 함량에 비례하지는 않았다. 4. 치환성 염기처리토양에서의 PCP흡착은 $H^+$-토양>$K^+$-토양>$Na^+$-토양> $Ca^{++}$-토양>$Mg^{++}$-토양의 순이었다. 5. PCP의 흡착관계를 Langmuir's adsorption isotherm과 Freundlicr's adsorption isotherm으로 표현가능하며 이로서 PCP의 최대 흡착량과 결합 energy 및 흡착층(吸着層)의 길이를 산출할수 있었다. 6. 토성별로 PCP 최대흡착량을 보면 식양토는 213.13mg/100gr, 양토는 $97.28{\sim}121.59mg/100gr$, 사양토는 $32.93{\sim}91.74mg/100gr$ 이 었다. 7. 무어독처리를 위한 한계시용량의 혼합토층의 깊이는 진천토양이 0.88cm로 가장 얕은 그리고 내산리 사질양토는 4.29cm로 가장 깊은 혼합시용을 요한다.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.573-577
• /
• 2014

The existing metal getters are invariably covered with thin oxide layers in air and the native oxide layer must be dissolved into the getter materials for activation. However, high temperature is needed for the activation, which leads to unavoidable deleterious effects on the devices. Therefore, to improve the device efficiency and gas-adsorption properties of the device, it is essential to synthesize the getter with a method that does not require a thermal activation temperature. In this study, getter material was synthesized using palladium oxide (PdOx) which can adsorb $H_2$ gas. To enhance the efficiency of the hydrogen and moisture absorption, a porous layer with a large specific area was fabricated by an etching process and used as supporting substrates. It was confirmed that the moisture-absorption performance of the $SiO_2/Si$ was characterized by water vapor volume with relative humidity. The gas-adsorption properties occurred in the absence of the activation process.

• 대한환경공학회지
• /
• 제28권4호
• /
• pp.384-388
• /
• 2006

본 연구는 극성 및 독성물질에 대한 활성탄의 흡착력을 향상시키기 위하여, 활성탄을 산 처리 후 활성탄 50 g에 0.1 M $FeSO_4{\cdot}7H_2O,\;CuSO_4{\cdot}5H_2O,\;AgNO_3$ 용액을 300 mL 첨가하여 jar tester를 이용하여 60 rpm의 속도로 1시간 교반시켜 철, 은, 구리 이온을 첨착하였다. 금속 첨착과정으로 제조한 금속 첨착활성탄의 표면 성상 및 화학적 특성을 규명하기 위하여 비표면적, 세공용적 및 분포, 주사현미경 촬영, 흡착등온 등의 실험을 하였다. 산 처리 활성탄에 철, 구리, 은을 첨착할 경우 미세세공이 중간세공과 거대세공으로 전환되어 금속 첨착량이 약 1.3배 정도 증가하였고 금속 첨착활성탄내에서 미세세공에 의한 물리적 흡착과 침착된 금속 이온에 의한 화학적 흡착이 동시에 가능하였다.