• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.60-68
• /
• 2007

It has been conducted by laser vision sensor for weldability estimation of front-bead after doing high speed butt laser welding of any condition. It has been developed a real time GUI(Graphic User Interface) system for weldability application in the basis of texts and field qualify levels. In the reference of bead imperfections, defects absolute position and defects intensity index of front-bead in the basis of formability reference, it has been produced a weldability estimation and defects intensity index of back-bead by back propagation neural network. In the result of by comparing measuring data by laser vision sensor of back-bead and data by back propagation neural network of one, it has been shown the similar results. Finally, under knowledge of welding condition in production line, it has been conducted a weldability estimation of back-bead only in knowledge of informations of front-bead data without using laser vision sensor or welding inspection experts and furthermore it can be used data for final inspection results of back-bead.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.12
• /
• pp.935-943
• /
• 2015

This paper presents a method for early fire detection and fire position determination inside the nacelle of wind turbine generator system. The rising temperature and obscuration rates inside the nacelle were used as parameters for fire detection, which can minimize the possibility of a fire detection malfunction because these rising rates do not depend on the absolute values of temperature and obscuration. The fire position was determined using the time difference among various sensor positions for fire detection. The performance of the method was tasted using sets of experiments in a nacelle simulator.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.39-42
• /
• 1994

The application of speed or position control technique in AC drives demands accurate position and velocity feedback information. Generally, resolver and absolute encoders are used as a velocity or position sensor. But they increase cost and when the sampling frequency is faster than sensoer's output frequency we can't Set exact information. In order to solve this problem this thesis proposes a speed and a position observer design for Permanent-Magnet Synchronous Motors(PMSM) specialty in low speed drives. Most literatures on this topic design the observer based on the field_oriented d_q model. But in this thesis, a new approach to machine dynamics is proposed. Since it is difficult to design the observer using the nonlinear model, the machine model is here linearlized at the operating point. The observer designed is implemented by software using Intel's 8097 microprocessor and verifies the proper performance of observer by simulation and experiment.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.701-706
• /
• 2009

We proposed the device to control a computer with only a head and eye blinks so that disabilities by car accidents can use a computer. Because they have paralysis of their upper extremities such as C4~C5 paraplegics and cerebral palsy, they cannot efficiently access a general keyboard/mouse not using hands and foots. The cursor position was estimated from a gyro-sensor which can measure head movements, and the mouse event such as click/double click from opto-sensors which can detect eye blinks. The sensor was put on the proper goggle in order not to disturb the visual field. The performance of the proposed device was compared to a general optical mouse, and was used both relative and absolute coordinate in cursor positioning control. The recognition rate of click and double-click was 86% of the optical mouse, the speed of cursor movement by the proposed device was not much different from the mouse. The overall accuracy was 80%. Especially, the relative coordinate is more convenience and accuracy than the absolute coordinate, and can reduce the frequency of reset to prevent the accumulative error.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.382-387
• /
• 1992

In order to obtain desired arc welding performance, we already developed an arc welding robot system that enabled coordinated motions of dual arm robots. In this system one robot arm holds a welding target as a positioning device, and the other robot moves the welding torch. Concerning to such a dual arm robot system, the positioning accuracy of robots is one important problem, since nowadays conventional industrial robots unfortunately don't have enough absolute accuracy in position. In order to cope with this problem, our robot system employed teaching playback method, where absolute error are compensated by the operator's visual feedback. Due to this system, an ideal arc welding considering the posture of the welding target and the directions of the gravity has become possible. Another problem still remains, while we developed an original teaching method of the dual arm robots with coordinated motions. The problem is that manual teaching tasks are still tedious since they need fine movements with intensive attentions. Therefore, we developed a 3-dimensional vision guided robot control method for our welding robot system with coordinated motions. In this paper we show our 3-dimensional vision sensor to guide our arc welding robot system with coordinated motions. A sensing device is compactly designed and is mounted on the tip of the arc welding robot. The sensor detects the 3-dimensional shape of groove on the target work which needs to be weld. And the welding robot is controlled to trace the grooves with accuracy. The principle of the 3-dimensional measurement is depend on the slit-ray projection method. In order to realize a slit-ray projection method, two laser slit-ray projectors and one CCD TV camera are compactly mounted. Tactful image processing enabled 3-dimensional data processing without suffering from disturbance lights. The 3-dimensional information of the target groove is combined with the rough teaching data they are given by the operator in advance. Therefore, the teaching tasks are simplified

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.6
• /
• pp.637-643
• /
• 2010

In this study, we developed a Portable Multi-sensor System, which consists of a video camera, a GPS/MEMS IMU and a UMPC to acquire video images and position/attitude data. We performed image georeferencing based on the bundle adjustment without ground control points using the acquired data and then evaluated the effectiveness of our system through the accuracy verification. The experimental results showed that the RMSE of relative coordinates on the ground point coordinates obtained from our system was several centimeters. Our system can be efficiently utilized to obtain the 3D model of object and their relative coordinates. In future, we plan to improve the accuracy of absolute coordinates through the rigorous calibration of the system and camera.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.3
• /
• pp.46-51
• /
• 2010

This paper describes the implementation of a precise underwater navigation solution using a multi-sensor fusion technique based on USBL, DVL, and IMU measurements. To implement this precise underwater navigation solution, three strategies are chosen. The first involves heading alignment angle identification to enhance the performance of a standalone dead-reckoning algorithm. In the second, the absolute position is found quickly to prevent the accumulation of integration error. The third one is the introduction of an effective outlier rejection algorithm. The performance of the developed algorithm was verified with experimental data acquired by the deep-sea ROV, Hemire, in the East-sea during a survey of a methane gas seepage area at a 1,500 m depth.

• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.56-67
• /
• 2015

In this study, a source locating technique applicable to transversely isotropic media was developed. Wave velocity anisotropy was considered based on the partition approximation method, which simply enabled AE source locating. Sets of P wave arrival time were decided by the two-step AIC algorithm and they were later used to locate the AE sources when having the least error compared with the partitioned elements. In order to validate the technique, pencil lead break test on artificial transversely isotropic mortar specimen was carried out. Defining the absolute error as the distance between the pencil lead break point and the located point, 1.60 mm ~ 14.46 mm of range and 8.57 mm of average were estimated therefore it was regarded as thought to be 'acceptable' considering the size of the specimen and the AE sensors. Comparing each absolute error under different threshold levels, results showed small discrepancies therefore this technique was hardly affected by background noise. Absolute error could be decomposed into each coordinate axis error and through it, effect of AE sensor position could be understood so if optimum sensor position was able to be decided, one could get more precise outcome.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.344-352
• /
• 2022

Accurate indoor localization of construction workers and mobile assets is essential in safety management. Existing positioning methods based on GPS, wireless, vision, or sensor based RTLS are erroneous or expensive in large-scale indoor environments. Tightly coupled sensor fusion mitigates these limitations. This research paper proposes a state-of-the-art positioning methodology, addressing the existing limitations, by integrating Stereo Visual Inertial Odometry (SVIO) with fiducial landmarks called AprilTags. SVIO determines the relative position of the moving assets or workers from the initial starting point. This relative position is transformed to an absolute position when AprilTag placed at various entry points is decoded. The proposed solution is tested on the NVIDIA ISAAC SIM virtual environment, where the trajectory of the indoor moving forklift is estimated. The results show accurate localization of the moving asset within any indoor or underground environment. The system can be utilized in various use cases to increase productivity and improve safety at construction sites, contributing towards 1) indoor monitoring of man machinery coactivity for collision avoidance and 2) precise real-time knowledge of who is doing what and where.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.1
• /
• pp.63-69
• /
• 2020

In this paper, we propose an indoor positioning technique using the landmark based on relative Access Point (AP) signal strengths. The absolute values of AP signals are used to conventional indoor positioning technologies, but they may be different because of the difference of the measuring device, the measuring environment, and the timing of the measurements. However, we found the fact that the flow of the AP's RSSI in certain places shows almost constant patterns. Based on theses characteristics, we identify the relative strength between the APs and store the certain places as landmarks where they show certain patterns. Once the deployment of the landmark map is complete, system calculate position of user using the IMU sensor of smartphone and calibrate it with stored landmarks. Our system shows 75.2% improvement over technology that used only sensors, and 39.6% improvement over technology that used landmarks that were selected with absolute values.