• 제목/요약/키워드: ATR-FTIR

검색결과 152건 처리시간 0.029초

일축 연신 조건에 따른 Poly(ethylene 2,6-naphthalate) 배향에 관한 연구 (Effect of Uniaxial Drawing Conditions on the Orientation of Poly (ethylene 2,6- naphthalate))

  • 진병석;이성효;이광희
    • 폴리머
    • /
    • 제25권5호
    • /
    • pp.699-706
    • /
    • 2001
  • 연신온도, 연신속도, 연신비 등 연신 조건에 따른 poly(ethylene 2,6-naphthalate) (PEN)의 배향상태 변화를 살펴보았다. 연신온도가 낮을수록 연신속도가 빠를수록 연신비에 따라 큰 복굴절 값을 보이며 FT-IR ATR dichroism 방법으로 구한 배향 특성도 복굴절의 실험결과를 뒷받침하였다. PEN을 $120^{\circ}C$에서 연신하면 무정형사슬 배향함수 ($f_a$)가 연신속도가 빠를수록 높은 값을 갖지만 $141^{\circ}C$에서 연신하면 반대로 연신속도가 빠를수록 낮은 값을 갖게 된다. 이러한 경향은 결정화 속도와 사슬 이완속도와의 관계로부터 설명이 가능하다. X-선 회절 실험 결과로부터 PEN의 naphthalene ring 구조가 필름표면에 평행하게 배열됨을 확인할 수 있었다.

  • PDF

Salt fog 시험법에 의한 실리콘 고무의 표면 열화 및 발수성 회복 특성 (Surface aging and hydrophobicity recovery of silicone rubber by salt fog method)

  • 김정호;서광석;문중섭;송우창;이재형;박용관;양계준;유영식
    • 한국전기전자재료학회논문지
    • /
    • 제13권7호
    • /
    • pp.636-641
    • /
    • 2000
  • The purpose of this study is assessing the characteristics of surface aging and recovery of hydrophobicity for silicone rubber which takes a great interest as outdoor insulation recently subjected to the combined stressed of salt fog and AC power. The methods for assessing are contact angle ATR-FRIR, AFM and XRD. In addition salt fog method is adopted as the artificial contamination experiment and AC power is applied 24 hour on and 24 hour off repeatedly for 5 cycles. The results suggest that degraded surface was more rough than virgin but was restored water repellency through the off cycle. It was due to not only the formation of fractal surface but also maintenance of hydrophobic surface by diffusion of low molecular oil. Although surface recovers initial hydropohbicity there are possibilities of decreasing electrical performance due to irreversable changes such as depolymerization of surface and loss of filler particles. This fact is confirmed by surface conductivity measurement showing that the degradation is significant and the recovery of hydrophobicity is imperfect as the energized cycle increases.

  • PDF

법주사 당간지주 지의류의 동정 및 FT-IR 스펙트럼 특성 분석 (Identification and FT-IR Spectrum Analysis of Lichens on Flagpole Support in Beopjusa Temple)

  • 김영희;이정민;최명주;홍진영;조창욱;김수지;정소영
    • 보존과학회지
    • /
    • 제33권5호
    • /
    • pp.391-398
    • /
    • 2017
  • 본 연구에서는 법주사 당간지주의 석재 표면에 서식하는 대표적인 생물피해 요인인 지의류에 대하여 조사하였다. 당간지주의 지의류는 5종으로 한정할 수 있다. 그 중 우점하는 2종의 고착상지의류는 Aspicilia sp.와 Pertusaria flavicans이며, 고착상지의류 위에 드물게 관찰되는 엽상지의류 1종과 수지상지의류 1종은 Xanthoparmelia conspersa와 Ramalina sekika로 동정되었다. 그리고 흑색조류층을 따라 서식하는 지의류는 Leprocaulon textum으로 확인되었다. 지의류가 생산하는 2차 대사산물을 분석하기 위하여 ATR FT-IR을 적용하였다. Xanthoparmelia conspersa와 Ramalina sekika의 FT-IR 스펙트럼을 비교해 본 결과, cyclic carbohydrate에 기인하는 C-O-C 결합과 carboxylic acid에서 기인하는 FT-IR 스펙트럼의 흡수피크가 특징적으로 관찰되어 이들이 생산하는 지의산이 서로 다르다는 것을 확인할 수 있었으며, stictic acid와 sekikaic acid가 Xanthoparmelia conspersa와 Ramalina sekika를 대표하는 지의산으로 화학구조에서 작용기의 차이에 의한 스펙트럼의 변화 및 특성을 확인할 수 있었다.

고온 (300~1000 ℃)에서 티타늄 금속시편의 표면 산화거동 (Oxidation behavior on the surface of titanium metal specimens at high temperatures (300~1000℃))

  • 박양순;한선호;송규석
    • 분석과학
    • /
    • 제22권6호
    • /
    • pp.464-470
    • /
    • 2009
  • 온도에 따른 티타늄금속의 산화거동을 조사하기 위하여 금속시편을 각각의 온도($300{\sim}1000^{\circ}C$)에서 2시간 동안 가열한 후, 생성된 산화시편의 표면에 대하여 X-선 회절(XRD)분석, 주사전자현미경 (SEM)/energy dispersive spectroscopy (EDS) 분석과 감쇠된 전반사(ATR) Fourier 변환 적외선(FT-IR) 분광 분석을 수행하였다. $300^{\circ}C$에서 대기 중의 산소가 티타늄 금속(hexagonal) 표면층으로 확산되어 적외선 흡수띠가 검출되었으며 온도가 높아짐에 따라 확산되는 산소 양이 증가하여 적외선 흡수띠와 X-선 회절 피크의 이동(shift) 현상이 나타났고 $700^{\circ}C$에서 XRD에 의해 $Ti_3O$ (hexagonal)의 생성이 확인되었다. 티타늄 금속 표면에 $TiO_2$ (rutile, tetragonal) 산화층이 생성되기 시작한 온도는 $600^{\circ}C$ 이었으며 이때 두께가 $1{\mu}m$ 이하 수준이었으나 $700^{\circ}C$에서는 약 $2{\mu}m$로 두꺼워졌고 $1000^{\circ}C$에서는 약 $110{\mu}m$ 두께에 달했다. 또한 $900^{\circ}C$ 이상의 온도에서 $TiO_2$ (rutile) 산화층 표면은 (110) 면의 방향으로 결정이 성장하였다.

A comparison of ATR-FTIR and Raman spectroscopy for the non-destructive examination of terpenoids in medicinal plants essential oils

  • Rahul Joshi;Sushma Kholiya;Himanshu Pandey;Ritu Joshi;Omia Emmanuel;Ameeta Tewari;Taehyun Kim;Byoung-Kwan Cho
    • 농업과학연구
    • /
    • 제50권4호
    • /
    • pp.675-696
    • /
    • 2023
  • Terpenoids, also referred to as terpenes, are a large family of naturally occurring chemical compounds present in the essential oils extracted from medicinal plants. In this study, a nondestructive methodology was created by combining ATR-FT-IR (attenuated total reflectance-Fourier transform infrared), and Raman spectroscopy for the terpenoids assessment in medicinal plants essential oils from ten different geographical locations. Partial least squares regression (PLSR) and support vector regression (SVR) were used as machine learning methodologies. However, a deep learning based model called as one-dimensional convolutional neural network (1D CNN) were also developed for models comparison. With a correlation coefficient (R2) of 0.999 and a lowest RMSEP (root mean squared error of prediction) of 0.006% for the prediction datasets, the SVR model created for FT-IR spectral data outperformed both the PLSR and 1 D CNN models. On the other hand, for the classification of essential oils derived from plants collected from various geographical regions, the created SVM (support vector machine) classification model for Raman spectroscopic data obtained an overall classification accuracy of 0.997% which was superior than the FT-IR (0.986%) data. Based on the results we propose that FT-IR spectroscopy, when coupled with the SVR model, has a significant potential for the non-destructive identification of terpenoids in essential oils compared with destructive chemical analysis methods.

[P(AA-co-PEGMM)] 공중합체 필름의 합성 및 물리화학적 특성 (Synthesis of [P(AA-co-PEGMM)] Copolymer Films and its Physicochemical Characteristics)

  • 김준식;박정숙;한건
    • Journal of Pharmaceutical Investigation
    • /
    • 제31권3호
    • /
    • pp.173-180
    • /
    • 2001
  • The physicochemical characteristics such as glass transition temperature (Tg), surface energy, swelling and FT-IR of [P(AA-co-PEGMM)], a copolymer of acrylic acid (AA) and polyethyleneglycol monoethylether mono methacrylate (PEGMM), were evaluated. The Tg of [P(AA-co-PEGMM)] decreased with increasing PEGMM content. [P(AA-co-PEGMM)] with 18 mole% PEGMM had the Tg of about $40^{\circ}C$, the similar physiological temperature of human. Moreover, [P(AA-co-PEGMM)] with lower PEGMM content had higher hydration and expected lower mucoadhesive strengths. To predict the mucoadhesiveness of [P(AA-co-PEGMM)] films, the contact angle of films were measured. With the increasing content of PEGMM of films, the contact angle was increased and the higher mucoadhesive forces was expected. ATR-FTIR studies revealed that the addition of the PEG moiety in AA increased the potential of hydrogen bonding for [P(AA-co-PEGMM)] as compared to cross linking polyacrylic acid (cr-PAA) because the oxygen in the repeat unit of PEG contributed in the formation of hydrogen bonding in the presence of mucin solution.

  • PDF

Synthesis of solid enantioselective macromer of trimesic acid for the enantiomeric separation of chiral alcohols

  • Ingole, Pravin G.;Bajaj, Hari C.;Singh, Kripal
    • Advances in materials Research
    • /
    • 제2권1호
    • /
    • pp.51-64
    • /
    • 2013
  • Enantioselective macromer of trimesic acid was prepared using S(-) menthol with trimesoyl chloride on polyimide (PI) ultrafiltration membrane. The chemical composition of macromer as well as polyimide ultrafiltration membrane was determined by ATR-FTIR Spectroscopy. The optical resolution of chiral alcohols was performed in pressure driven process. The effect of monomer solutions concentration, effect of air-drying time of S(-) menthol solution, effect of reaction time, effect of operating pressure, effect of feed concentration of racemate on the performance of macromer was studied. The synthesised material exhibits separation of chiral alcohols (menthol ~23% and sobrelol ~21%).

Doxyclycline and Ciprofloxacin Treatment of Silk to Produce Novel Infection Resistance Biomaterials

  • Park, Hyung-Min;Martin Bide;Matthew Phaneuf;William Quist;Frank Logerfo
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
    • /
    • pp.81-82
    • /
    • 2003
  • Two antibiotics, doxycycline (doxy) and ciprofloxacin (cipro) were applied under a variety of conditions to silk, and to silk that had previously been hydrolyzed. FTIR-ATR analyses indicated that the drastic increase in sorption of antibiotics by hydrolyzed silk was attributable to both chemical and conformational changes that occurred on hydrolysis. A high sorption of doxy by hydrolyzed silk did not necessarily give a more infection-resistant material as determined by a zone of inhibition test. Conversely, the same hydrolysis considerably increased both sorption of cipro and zone of inhibition of cipro-treated silk dyed at 65$^{\circ}C$ and 85$^{\circ}C$.

  • PDF

극한 환경 MEMS용 SiCOI 구조 제작 (Fabrication of SiCOI Structures for MEMS Applications in Harsh Environments)

  • 정귀상;정연식;류지구
    • 센서학회지
    • /
    • 제13권4호
    • /
    • pp.264-269
    • /
    • 2004
  • This paper describes on an advanced technology of 3C-SiC/Si(100) wafer direct bonding using PECVD oxide to intermediate layer for SiCOI(SiC-on-Insulator) structure because it has an attractive characteristics such as a lower thermal stress, deposition temperature, more quick deposition rate and higher bonding strength than common used poly-Si and thermal oxide. The PECVD oxide was characterized by ATR-FTIR. The bonding strength with variation of HF pre treatment condition was measured by tensile strength measurement system. After etch-back using TMAH solution, roughness of 3CSiC surface crystallinity and bonded interface was measured and analyzed by AFM, XRD, and SEM respectively.

Polypropylene의 방사선멸균에있어 제 첨가제들에 의한 영향 (Radiation Effects on Polypropylene for Biomedical Application)

  • 강길선;이해방
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1995년도 추계학술대회
    • /
    • pp.134-137
    • /
    • 1995
  • Studies on the formulations of the additives such as antioxidants, crosslinking agent, and trans-stilbeneoxide (StO) with polypropylene (PP) have been carried out to improve the resistance of gamma radiation sterilization. The irradiated PP and ethylene-propylene copolymers samples with control and additives were characterized by mechanical tester, colorimetry, and Fourier transform infrared spectroscopy with total attenuated reflectance mode (FTIR-ATR). Crosslinking agent and StO formulated PP showed remarkable radiation resistance and minimum discoloration. Also, radiation resistance of ethylene propylene copolymers with 3% of ethylene contents was better than that of PP homopolymers in the case of no additives. The proposed mechanisms of radiation stabilization with additives are also discussed.

  • PDF