• International Journal of Oral Biology
• /
• v.41 no.2
• /
• pp.53-62
• /
• 2016

In the present study, we evaluated the effect of CGM on osteogenic differentiation of cultured osteoblasts, and determined whether combination treatment with LLLT had synergistic effects on osteogenic differentiation. The results indicated that CGM promoted proliferation, differentiation, and mineralization of osteoblasts at the threshold concentration of $10{\mu}g/ml$; whereas, CGM showed cytotoxic properties at concentrations above $100{\mu}g/ml$. ALP activity and mineralization were increased at concentrations above $10{\mu}g/ml$. CGM in concentrations up to $10{\mu}g/ml$ also increased the expression of osteoblast-activated factors including type I collagen, BMP-2, RUNX2, and Osterix. The CGM ($50{\mu}g/ml$) and LLLT (80 mW for 15 sec) combination treatment group showed the highest proliferation levels, ALP activity, and mineralization ratios. The combination treatment also increased the levels of phosphorylated forms of p38, ATF2, PKD, ERK, and JNK. In addition, the osteoblast differentiation factors including type I collagen, BMP-2, RUNX2, and Osterix protein levels were clearly increased in the combination treatment group. These results suggested that the combination treatment of CGM and LLLT has synergistic effects on the differentiation and mineralization of osteoblastic cells.

• Journal of Animal Science and Technology
• /
• v.56 no.7
• /
• pp.23.1-23.7
• /
• 2014

Background: Scanning of the genome for selection signatures between breeds may play important role in understanding the underlie causes for observable phenotypic variations. The discovery of high density single nucleotide polymorphisms (SNPs) provide a useful starting point to perform genome-wide scan in pig populations in order to identify loci/candidate genes underlie phenotypic variation in pig breeds and facilitate genetic improvement programs. However, prior to this study genomic region under selection in commercially selected Berkshire and Korean native pig breeds has never been detected using high density SNP markers. To this end, we have genotyped 45 animals using Porcine SNP60 chip to detect selection signatures in the genome of the two breeds by using the $F_{ST}$ approach. Results: In the comparison of Berkshire and KNP breeds using the FDIST approach, a total of 1108 outlier loci (3.48%) were significantly different from zero at 99% confidence level with 870 of the outlier SNPs displaying high level of genetic differentiation ($F_{ST}{\geq}0.490$). The identified candidate genes were involved in a wide array of biological processes and molecular functions. Results revealed that 19 candidate genes were enriched in phosphate metabolism (GO: 0006796; ADCK1, ACYP1, CAMK2D, CDK13, CDK13, ERN1, GALK2, INPP1; MAK, MAP2K5, MAP3K1, MAPK14, P14KB, PIK3C3, PRKC1, PTPRK, RNASEL, THBS1, BRAF, VRK1). We have identified a set of candidate genes under selection and have known to be involved in growth, size and pork quality (CART, AGL, CF7L2, MAP2K5, DLK1, GLI3, CA3 and MC3R), ear morphology and size (HMGA2 and SOX5) stress response (ATF2, MSRB3, TMTC3 and SCAF8) and immune response (HCST and RYR1). Conclusions: Some of the genes may be used to facilitate genetic improvement programs. Our results also provide insights for better understanding of the process and influence of breed development on the pattern of genetic variations.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.3
• /
• pp.10-16
• /
• 1991

The error networks due to the measuring systems and the test fixture must be previously calibrated in order to characterize the microwave devices. In this paper, it is presented a new method to characterize the error networks in which only two different microstrip lines are used for the calibration. Once each length of two calibrat- ing microstrip lines is accurately defined, the calibrated data can be easily obtained without acknowledgement for the propagation constant. The end effect is not considered when fabricated the microstrip lines used to calibration. The ATF13736 GaAs MESFET is characterized by means of the calibrating procedure with this method. The range of measuring frequency is 2 to 18 GHz, and the bias voltage and current are $V_{DS}$ =2.5V, $I_{DS}$ =20mA, respectively. Compared the calibrated data with data sheet, it is showed that the magnitude is nearly agreed with each other and the phase is deviated by 0.1 to 12 degrees in lower frequencies.

• Journal of Life Science
• /
• v.23 no.1
• /
• pp.116-124
• /
• 2013

The aim was to examine resistance exercise-related genes after 8 weeks of resistance training. Thirty-two male Sprague-Dawley rats were divided into four groups: 4 weeks sedentary (4 wks CON, n=8), 8 weeks sedentary (8 wks CON, n=8), 4 weeks exercise training (4 wks REG, n=8), and 8 weeks exercise training (8 wks REG, n=8). The rats were trained to climb a 1-m vertical incline (85-degree), with weights secured to their tails. They climbed 10 times, 3 days per week, for 8 consecutive weeks. Skeletal muscle was taken from the flexor halucis longus after the exercise training. After separating the total RNA, large-scale gene expression was investigated by beadarray (Illumina RatRef-12 Expression BeadChip) analysis, and qPCR was used to inspect the beadarray data and to analyze the RNA quantitatively. The detection p-value for the genes was p<0.01, the M-value {M=$log_2$(condition)-$log_2$(reference)} was >1.0, and the DiffScore was >20. In total, the expression of 30 genes significantly increased 4 weeks after the exercise training, and the expression of six genes decreased. At 8 weeks, the expression of five genes significantly increased and that of 12 decreased. Several genes are potentially involved in resistance exercise and muscle hypertrophy, including 1) regulation of cell growth (IGFBP1, PLA2G2A, OKL38); 2) myogenesis (CSRP3); 3) tissue regeneration and muscle development (MUSTN1, MYBPH); 4) hypertrophy (CYR61, ATF3, NR4A3); and 5) glucose metabolism (G6PC, PCK1). These results may help to explain previously reported physiological changes of the skeletal muscle and suggest new avenues for further investigation.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.193-199
• /
• 2019

In this paper, the results of underwater vibration experiment are analyzed to verify platform vibration-induced noise isolation characteristics of a hull-mounted acoustic sensor. The experimental condition causing platform vibration-induced noise is generated using the mock-up hull, where the acoustic sensor is installed, with shaker in an acoustic water tank. The performance indices of ATF (Acceleration Transfer Function), AVS (Acceleration Voltage Sensitivity), and IL (Insertion Loss) for the acoustic sensor are calculated from the output of the standard accelerometers, which are installed on the mock-up hull and the acoustic sensor, and the output signal of the acoustic sensor. The frequency-dependent noise isolation characteristics of the acoustic sensor are analyzed based on the calculated performance indices and an effectiveness of the experiment is examined.

• Journal of Life Science
• /
• v.21 no.2
• /
• pp.202-210
• /
• 2011

Adipocyte differentiation is an ordered multistep process requiring the sequential activation of several groups of adipogenic transcription factors, including CCAAT/enhancer-binding protein-$\alpha$ and peroxisome proliferator-activated receptor-$\gamma$, and coactivators. In previous reports, we identified that replication factor C 140 (RFC140) protein played a critical role in regulating adipocyte differentiation as a coactivator. Here, we show expressional regulation of RFC140 and small RFC subunit, RFC38, following characterization of gene promoter of RFC140 and RFC38. In addition, RFC140 increases PPAR$\gamma$-mediated gene activation, resulting from direct protein-protein interaction of RFC140 and PPAR$\gamma$. Taken together, these findings demonstrate that the regulated expression of RFC140 and RFC38 by specific adipocyte transcription factors is required for the adipocyte differentiation process.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1549-1559
• /
• 2022

As an accident tolerant fuel (ATF) concept, oxide dispersion strengthened Zircaloy-4 (ODS Zry-4) cladding has been developed to enhance the mechanical properties of cladding using laser processing technology. In this study, a simulation technique was established to investigate the mechanical properties and effects of Y₂O₃ particles for the ODS Zry-4. A 3D representative volume element (RVE) model was developed considering the parameters of the size, shape, distribution and volume fraction (VF) of the Y₂O₃ particles. From the 3D RVE model, the Young's modulus, coefficient of thermal expansion (CTE) and creep strain rate of the ODS Zry-4 were effectively calculated. It was observed that the VF of Y₂O₃ particles had a significant effect on the aforementioned mechanical properties. In addition, the predicted properties of ODS Zry-4 were applied to a simulation model to investigate cladding deformation under a transient condition. The ODS Zry-4 cladding showed better performance, such as a delay in large deformation compared to Zry-4 cladding, which was also found experimentally. Accordingly, it is expected that the simulation approach developed here can be efficiently employed to predict more properties and to provide useful information with which to improve ODS Zry-4.

• Herbal Formula Science
• /
• v.25 no.4
• /
• pp.527-536
• /
• 2017

Objectives : The present study, to confirm the osteoblast differentiation effects of Acer tegmentosum Maxim. (AT) extract. Methods : In this experiment, cell viability, Alizarin red S assay, and Alkaline phosphatase (ALP) activity with AT extract (50, $100{\mu}g/m{\ell}$). Also, we studied the expression of differentiation regulator with AT extract in primary calvarial osteoblasts cells (pOB). Results : As a result of AT treatment, we determined that AT extract stimulates ALP activity and alizarin red activities in the pOB cells for mineralization for 18 days. Moreover, these factors increasing osteogenic markers such as Runt-related transcription factor2 ($Run{\times}2$), osteocalcin (OC), osteopontin, osterix, smad1, smad5, activating transcription factor4 (ATF4) and collagen type I alpha 1. Conclusions : These results indicate that AT extract have effect on bone through the promotion of osteoblastic differentiation, suggesting that it could be used for the treatment of bone diseases.

• BMB Reports
• /
• v.44 no.11
• /
• pp.741-746
• /
• 2011

Tanning ability is important, because it represents the ability of the skin to protect itself against ultraviolet (UV) radiation. Here, we sought to determine genetic regions associated with tanning ability. Skin pigmentation was measured at the outer forearm and buttock areas to represent facultative and constitutive skin color, respectively. In our study population consisting of isolated Mongolian subjects, with common histories of environmental UV exposure during their nomadic life, facultative skin color adjusted by constitutive skin color was used to indicate tanning ability. Through linkage analysis and family-based association tests of 345 Mongolian subjects, we identified 2 potential linkage regions regulating tanning ability on 5q35.3 and 12q13.2, having 6 and 7 significant single nucleotide polymorphisms (SNPs), respectively. Those significant SNPs were located in or adjacent to potential candidate genes related to tanning ability: GRM6, ATF1, WNT1, and SILV/Pmel17.

• YAKHAK HOEJI
• /
• v.60 no.3
• /
• pp.128-134
• /
• 2016

L1 cell adhesion molecule (L1CAM) is a cell surface molecule to initiate a variety of cellular responses through interacting with other cell adhesion molecules in a homophilic or heterophilic manner. Although its expression was found to be upregulated in some tumor cells, including cholangiocarcinomas, and ovarian cancers, and many studies have investigated the role of L1CAM in these cancers, its role in inflammatory responses has been poorly understood. In this study, we explored the role of L1CAM in macrophage-mediated inflammatory responses. L1CAM significantly suppressed the production of nitric oxide (NO), but induced cell proliferation in RAW264.7 cells. L1CAM expression was detectable, but its expression was markedly decreased by lipopolysaccharide (LPS) in RAW264.7 cells. In addition, the expression of pro-inflammatory genes, such as tumor necrosis factor (TNF)-${\alpha}$, cyclooxygenase (COX)-2, and inducible nitric oxide synthase (iNOS) induced by LPS was dramatically suppressed by L1CAM in RAW264.7 cells. L1CAM inhibited the transcriptional activities of NF-${\kappa}B$ and AP-1 while its cytoplasmic domain deletion form, $L1{\Delta}CD$ did not suppressed their activities in RAW264.7 cells. Moreover, L1CAM suppressed nuclear translocation of p65 and p50 as well as c-Jun, c-Fos and p-ATF2 which are transcription factors of NF-${\kappa}B$ and AP-1, respectively. In conclusion, L1CAM suppressed inflammatory responses in macrophages through inhibiting NF-${\kappa}B$ and AP-1 pathways.