• 농촌지도와개발
• /
• 제7권1호
• /
• pp.65-74
• /
• 2000

Agricultural extension services in YoungDong county, ChungBuk province have tried and changed many things to overcome difficult situations since localization of extension services in 1997. The county Rural Guidance Office changed the name of the office as county Agricultural Technology & Extension Center (ATEC), and has been operated as a service center for all people who need help in agriculture. The recent efforts of the ATEC have been placed on eco-friendly agriculture and sustainable agriculture for protecting the natural environment of the county as well as production of safe agricultural products. In order to overcame difficult situations under the IMF, the ATEC has tried to find new ways for the extension services because of reduced extension educators under the IMF restructuring. The followings were a few examples of many efforts in various fields to overcome difficult situations in the rural county; 1) The ATEC has supported services to produce safe and high quality agricultural products and to increase their high value through extension services for food processing. 2) The ATEC has opened experimental fields for farmers who want to learn new technologies to cultivate grapes, persimmons, apples and pests etc., specialty fruit trees in the county. 3) The ATEC has implemented many kinds of programs to improve the quality of the extension educators to serve better.

• 농촌지도와개발
• /
• 제10권1호
• /
• pp.31-42
• /
• 2003

The purposes of this study were (1) to identify the present situation and pending problems of agricultural education in Agricultural Technology & Extension Center (ATEC), (2) to analyze the satisfaction degree and educational needs of agricultural extension education program, and (3) to draw some implications in the direction of the development direction of agricultural extension, based on the analysis aforementioned. Data were collected through questionnaires from 230 farmers. Based on the results of study, the recommendations were as follows. 1. Increase of income could not guarantee the improvement of QOL. So, ATEC should make some efforts to plan and administer diversified agricultural extension and education programs. 2. Agricultural practice was the most effective educational methods. Especially, for return-migrants and young farmers, applicable educational program should be planned and offered. 3. Education program on agricultural information, especially on the internet use, would be the most attractive program of agricultural extension education in the future.

• 한국발생생물학회지:발생과생식
• /
• 제22권1호
• /
• pp.19-27
• /
• 2018

In the present study, we employed Hershberger assay to determine possible androgenic or antiandrogenic activities of three di-2-ethylhexyl phthalate (DEHP) substitute candidates. The assay was carried out using immature castrated Sprague-Dawley male rats. After 7 days of the surgery, testosterone propionate (TP, 0.4 mg/kg/day) and test materials (low dose, 40 mg/kg/day; high dose, 400 mg/kg/day) were administered for 10 consecutive days by subcutaneous (s.c.) injection and oral gavage, respectively. Test materials were DEHP, 2-ethylhexyl oleate (IOO), 2-ethylhexyl stearate (IOS) and triethyl 2-acetylcitrate (ATEC). The rats were necropsied, and then the weights of five androgen-dependent tissues [ventral prostate, seminal vesicle, coagulating glands, levator ani-bulbocavernosus (LABC) muscle, paired Cowper's glands, and glans penis] and four androgen-insensitive tissues (kidney, adrenal glands, spleen and liver) were measured. All test materials including DEHP did not exhibit any androgenic activity in the assay. On the contrary, antiandrogen-like activities were found in all test groups, and the order of the intensity was ATEC < DEHP < ISO < IOO in the five androgen-sensitive tissues. There was no statistical difference between low dose treatment and high dose treatment of all replacement candidate groups. In DEHP groups, high dose treatment exhibited significant weight gains in LABC and Glan Penis. There was no statistical difference in androgen-insensitive tissue measurements. Since the effects of ATEC treatment on the accessory sex organs were much less or not present at all when compared to those of DEHP, ATEC could be a strong candidate to replace DEHP. IOO treatment brought most severe weight reduction in all of androgen-sensitive tissues, so this material should be excluded for further screening of DEHP substitute selection.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.59-60
• /
• 2014

In this paper, development of laser diode driver with 2.5kW rating is presented. The driver is configured with interleaved PFC converter, high frequency full bridge DC-DC converter, two laser diode drivers and ${\mu}$-processor based controller. The system has two laser diode drivers for providing high current and low current. High current driver delivers normal output power of diode; low current driver is for providing critical current of diode for long lifetime. Computer simulation and experiment was performed for verification, as the results, developed driver performs well.

• 농업생명과학연구
• /
• 제44권1호
• /
• pp.1-8
• /
• 2010

This study was conducted to investigate effect of low temperature and ripeness stages on fruit quality of chilli pepper (cv. Nockgwang) during storage at 5, 7, and $10^{\circ}C$. Fruits at three ripeness stages were selected based on uniform fruit size and three maturities on peel color: S1 (fully developed fruit just before the onset of ripening), S2 (fruits in the onset of color change), and S3 (fruits in completely red in color). Lower temperature attributed to increase fruit weight loss (WL) and WL was higher in S2 than the other ripeness stages. The highest respiration rate and ethylene production was found at S2 fruit while those of fruit in green and red showed similar and remained lower level during storage. Electrolyte leakage (EL) was higher as storage temperature decreased. After 28 d storage, EL rates of fruits at $5^{\circ}C$ were 43, 36, and 17% in S1, S2, and S3 while those at $10^{\circ}C$ were 17, 19, and 14%, respectively. These results show that chilli pepper fruits are tended to lose more water at lower temperature partially associated with increased EL. Thus, threshold storage temperature must be considered for avoiding chilling during storage and for extending the storage life of fresh pepper fruits.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제7권3호
• /
• pp.111-118
• /
• 2007

In 2000, US Army Test and Evaluation Command (ATEC) released the status of reliability requirement levels and achievements for the military equipment which evaluated through the operational tests from 1985 to 1990 and from 1996 to 2000. The rates of military equipments that do not meet reliability requirements are 59% from 1985 to 1990 and 80% from 1996 to 2000. Thus, the US Army has figured out causes, taken steps and put them into practice, This paper is about the recent reliability problems and the latest tendency about US military equipment to acquirere liability level.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4378-4384
• /
• 2012

LED 칩 패키징에서 다이 본딩은 웨이퍼에서 분할된 다이를 리드 프레임에 접착제로 고정시켜 칩이 다음 공정을 견딜 수 있는 충분한 강도를 제공하는 중요한 공정이다. 본 논문에서는 PLCC 구조 LED 패키지 프레임에 소형 제너 다이오드를 부착하는 다이 본딩 공정능력의 최적화를 위하여 공정에 영향을 미치는 여러 인자를 분석하여 반응표면분석법을 적용하여 그 결과를 도출하였다. 인자를 분석하여 5인자 3수준 4반응치를 고려하여 실험계획법을 수립하였으며, 그 결과 모든 반응치의 목표를 만족하는 최적 조건을 확보할 수 있었다.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.129-139
• /
• 2004

DXD-19 is a flexible sheet explosive, which is a new polymer-bonded explosives(PBX's). DXD-19 is relatively insensitive and can be extruded into various configurations to be applied to munitions. A typical application includes multi-point initiation for the warhead, cutting/severance devices and transfer lines. The DXD-19 composition employs a binder system derived from the thermoplastic elastomer(HyTemp 4454) containing $5\%$ OH terminated with isocyanate curable for increasing mechanical properties. The use of an elastomer CAB increases its mechanical properties and the use of an energetic plasticizer BDNPF/BDNPA(F/A) improves the process ability as well as energy contents. The composition of the extruded DXD-19 formulation is formed $\%$ weight of $PETN/HyTemp/ATEC/(F/A)/CAB=72\~73/12\~13/6\~7/6\~7/1\~2$. Our safety tests of DXD-19 shows Insensitivity to an impact test and friction test, good thermal stability and excellent mechanical properties.

• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.2624-2630
• /
• 2013

LED 칩 패키징에서 다이 본딩은 분할된 칩을 리드 프레임에 고정시켜 칩이 이후 공정을 견딜 수 있도록 충분한 강도를 제공하는 중요한 공정이다. 다이본딩 공정 중에서, 측정 단계는 정확한 에폭시 토출 위치 지정과 충분한 강도를 가지고 접합할 수 있도록 다이가 정확한 위치에 놓여있는지 상태를 결정하는데 있어 매우 중요하다. 본 연구에서는 LED 다이 본딩을 위한 머신 비전 기반의 측정 시스템을 개발하였다. 제안된 시스템에서 에폭시 토출과 어태칭 상태 검출을 위해 각각 2개의 카메라를 사용하였다. 제안된 측정 시스템에 새로운 비전 알고리즘을 적용하였고, 실험을 통해 본 알고리즘의 효율을 검증하였다. 비전 알고리즘을 이용하여 측정된 위치 오차는 $X:-29{\mu}m$, $Y:-32{\mu}m$, 회전오차는 3도 이내 인 것을 확인할 수 있었다. 결론적으로 제안된 머신 비전 기반의 측정 시스템을 통해 개발된 다이 본딩 시스템의 향상된 성능을 확인하였다.

• 중소기업융합학회논문지
• /
• 제1권1호
• /
• pp.39-44
• /
• 2011

인류가 석탄, 석유, 천연가스 화석 연료 등 연로들에 대한 무절제한 사용으로 하여 전 세계적으로 심각한 환경오염과 화석 연료의 자원 고갈문제에 직면하게 되었다. 따라서 이러한 환경오염 문제를 줄이고 또한 고갈돼가고 있는 화석 연료를 대체할 태양 에너지, 풍력, 수력, 바이오매스, 지열 등과 같은 신재생에너지 자원의 개발이 필요하게 되었다. 최근 센서 네트워크 기술의 발달로 인하여 신재생 에너지 데이터는 각종 센서들로부터 원격으로 수집이 된다. 그러나 이러한 데이터는 센서 네트워크로부터 실시간으로 연속적으로 무한히 수집되는 센서 스트림 데이터이기 때문에 주기적으로 갱신되는 데이터 수집 방법으로는 최신의 데이터를 유지하기 어려우며, 부정확한 분석 결과를 도출할 수 있다. 따라서 본 논문에서는 무선 센서 네트워크 내에서 데이터 스트림을 효율적으로 수집하고 센서의 전송 횟수를 감소하기 위한 칼만 필터링 기법에 기반 한 필터링 기법을 제안하였다.