• 한국의류학회지
• /
• 제29권3_4호
• /
• pp.438-448
• /
• 2005

The purpose of this study was to identify the relationships among physical growth, body criticism from others, sociocultural attitude toward physical appearance, body image, self-esteem, and clothing attitudes. The data were collected from 439 junior high school girls living in Seoul, Korea, via a self-administered questionnaires, and were analyzed by factor analysis and LISREL models. The results of this study were as follows: 1) Among three sub-variables of physical growth, the height had a positive effect on the affective aspect of body image. 2) The body criticism from others had the effect neither on the sociocultural attitude toward physical appearance nor on the affective aspect of body image. 3) The sociocultural attitude toward physical appearance had a negative effect on the affective aspect of body image and a positive effect on the cognitive/behavioral aspect of body image. 4) The affective aspect of body image had a positive effect on the cognitive/behavioral aspect of body image, self-esteem, and clothing attitude. However, the cognitive/behavioral aspect of body image had the effect on clothing attitude. 5) The self-esteem had no significant effect on clothing attitudes.

• 한국농공학회논문집
• /
• 제48권3호
• /
• pp.85-94
• /
• 2006

Practially useful method of steel fiber for construction work is presented in this study. The most important purpose of this study is to develop a model which can predict mechanical behavior of the structure according to aspect ratio and volume fraction of steel fiber. Experiments on compressive strength, elastic modulus, and splitting strength were performed with self-made cylindrical specimens of variable aspect ratios and volume fractions. The experiment showed that compressive strength was not in direct proportion to volume fraction which doesn't seem to have great influence over compressive strength. However, splitting strength showed almost direct proportion to aspect ratio and volume fraction. Improvement of optimal efficiency was confirmed when the aspect ratio was 70. Experiments on flexural strength, fracture energy, and characteristic length were carried out with self-manufactured beams with notch. As a result, increases of flexural strength, fracture energy, and characteristic length according to increase of volume fraction tend to be prominent when aspect ratio is 70. The steel fiber improves concrete to be more ductile and tough. Moreover, regression analysis was the performed and predictable model was developed after determining variables. With comparison and analysis of suggested estimated values and measured data, reliance of the model was verified.

• 동력기계공학회지
• /
• 제19권4호
• /
• pp.36-42
• /
• 2015

TMixed convective flow in a bottom heated and top cooled rectangular channel can be significantly affected by the channel aspect ratio, Prandtl number, Reynolds number, Rayleigh number and angle of inclination. In such a mixed convection, the flow pattern plays an important role in various technological processes. In this study, a numerical investigation is carried out to explore mixed convection in a three-dimensional rectangular channel with bottom heated and top cooled uniformly. The three-dimensional governing equations are discretized using the finite volume method. In the range of low Reynolds number($0{\leq}Re{\leq}9.6{\times}10^{-2}$), the effects of the aspect ratio($2{\leq}AR{\leq}12$) and Gr/Re are presented and discussed. The longitudinal roll number in the channel is increased with increasing aspect ratio, and the roll number induced, regardless of the aspect ratio number, is even in the range of aspect ratios between 2 and 12, New vortex flow structure containing inclined longitudinal rolls is found, which is affected by aspect ratio and Reynolds number. The ratio Gr/Re is used to check the relative magnitudes of forced and natural convection in the mixed convective flow of high viscous fluid.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.164-173
• /
• 2006

The cooling capacity of a micro-heat pipe is mainly governed by the magnitude of capillary pressure induced in the wick structure. For microchannel wicks, a higher capillary pressure is achievable for narrower and deeper channels. In this study, a metallic micro-heat pipe adopting high-aspect-ratio microchannel wicks is fabricated. Micromachining of high-aspect-ratio microchannels is done using the laser-induced wet etching technique in which a focused laser beam irradiates the workpiece placed in a liquid etchant along a desired channel pattern. Because of the direct writing characteristic of the laser-induced wet etching method, no mask is necessary and the fabrication procedure is relatively simple. Deep microchannels of an aspect ratio close to 10 can be readily fabricated with little heat damage of the workpiece. The laser-induced wet etching process for the fabrication of high-aspect-ratio microchannels in 0.5mm thick stainless steel foil is presented in detail. The shape and size variations of microchannels with respect to the process variables, such as laser power, scanning speed, number of scans, and etchant concentration are closely examined. Also, the fabrication of a flat micro-heat pipe based on the high-aspect-ratio microchannels is demonstrated.

• 한국경영과학회지
• /
• 제14권2호
• /
• pp.27-42
• /
• 1989

REA 모델은 EA 모델의 구성요소인 측면을 역할측면, 연산측면, A-PART-OF 측면, IS-A 측면, 속송측면 등의 5개 측면으로 분류한 모델이다. EATPS 는 사용자 인터페이스모듈, 지식생성 모듈, 인스턴스 관리 모듈, 스키마 구조관리 모듈, 무걸성검사 모듈등의 5개 모듈로 구성된 지능적 지식표현 시스템의 REA 모델에 의해 대화식 (interactive) 으로 생성하고 관리한다. 본눈문에서는 EATPS 의 구성과 기능, 지식 정의언어인 EAKDL 의 구조및 대화식 형성, 지식생성 모듈의 구성과 기넝, 클래스 생성 모듈의 기능과 알고리즘, 그리고 상속추론메카니즘을 도입한 생성모듈의 기능 및 알고리즘을 제시하였다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.491-499
• /
• 2020

The implementation of PPK-BLU in Indonesia was not followed by a comprehensive change in aspects of organization, human resources, and finance. Based on this background, this study aims to provide a comprehensive evaluation of the BTIP after the implementation of the PPK-BLU policy in the implementation of telecommunications services and information to the public in Indonesia. This research used integration of the McKinsey 7S method, Analytical Hierarchy Process, and Likert scale. The integration of these methods can provide a detailed quantitative analysis. Based on the overall evaluation results of carrying out the PPK BLU, BTIP has a performance value of 81.195%, which puts it within the Good category. The McKinsey 7S elements used as a whole have the following values: one aspect is categorized as Very Good, namely, the strategy aspect with a value of 91.025%; two aspects are categorized as Good (structural aspects with a value of 86.857%, and skill aspects with a value of 81.432%); three aspects are categorized as Adequate (style aspect with a value of 76.441%, staff aspect with a value of 78.605%, and share value aspect with a value of 76.331%); one aspect is categorized as Bad, that is the system aspect with a value of 67.503%.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.705-718
• /
• 2014

This paper presents an analytical model for determining the transverse reinforcement required for reinforced concrete exterior beam-column joints subjected to reversed cyclic loading. Although the joint aspect ratio can affect joint shear strength, current design codes do not consider its effects in calculating joint shear strength and the necessary amount of transverse reinforcement. This study re-evaluated previous exterior beam-column joint tests collected from 11 references and showed that the joint shear strength decreases as the joint aspect ratio increases. An analytical model was developed, to quantify the transverse reinforcement required to secure safe load flows in exterior beam-column joints. Comparisons with a database of exterior beam-column joint tests from published literature validated the model. The required sectional ratios of horizontal transverse reinforcement calculated by the proposed model were compared with those specified in ACI 352R-02. More transverse reinforcement is required as the joint aspect ratio increases, or as the ratio of vertical reinforcement decreases; however, ACI 352R-02 specifies a constant transverse reinforcement, regardless of the joint aspect ratio. This reevaluation of test data and the results of the analytical model demonstrate a need for new criteria that take the effects of joint aspect ratio into account in exterior joint design.

• 한국실내디자인학회논문집
• /
• 제26권4호
• /
• pp.42-56
• /
• 2017

In Korea, which has three sides of the sea, various waterfront spaces are being developed and developed along with various coastal landscapes. However, there are a lot of cases that do not consider the regional characteristic of the coast or the characteristic of the coastal landscape. In many cases, the street facilities cause the landscape degradation and the use inconvenience because of incongruity with the scenery, aging and lax management. Therefore, it is necessary to reflect the specificity of the coastal landscape in planning and directing the street facilities, harmonizing with the surrounding natural environment, and consideration of sustainability. However, there is no research or planning index for sustainable street facilities considering the coastal characteristics. Therefore, this study suggests plan elements to improve the sustainability of the street facilities on the shore and proposes them as basic plan elements, and suggests what kind of improvements should be made to improve the sustainability of coastal facilities in Korea. Based on the plan elements derived from the plan, we checked the problems and complementary points of coastal street facilities in Korea by analyzing the current status of the street facilities around the Jeju Island beach from a sustainable point of view, and suggested plan indicators that should be supplemented to improve sustainability. We surveyed the street facilities such as walkway blocks, benches, pagoda, drinking fountain, trash cans, bicycle shelters, fences, guide maps, streetlights, and shower rooms in 10 beaches in Jeju Island. This study analyzed the sustainability characteristics of the each factor of these facilities by surveying the reflectivity of the 23 plan indicators from the six aspects derived from the sustainability planning factor as conformity, partial reflection, non - reflection, and nonconformity. The results of the analysis showed that the functional aspect was the highest with 68.3%, the material aspect (53%), the landscape aspect (22.3%), the productive aspect (14.7%) and the morphological aspect (12.2%), and maintenance / management (10.6%). In addition, the facilities with the lowest fitness in each aspect are bicycle shelter in landscape aspect, bicycle storage box and trash can in form aspect, shower room in material aspect, trash can in functional aspect, showroom, guide maps and drinking fountain in product aspect, showroom In maintenance aspect. In order to improve the sustainability of coastal facilities in the future, it is necessary to complement the administrative and landscape aspects. In coastal facilities, it is necessary to consider the sustainability planning index, especially for showers, taking into account the specificity of beaches. Consideration should be given to various aspects of sustainability for bike shelters and trash facilities. Through this study, we have proposed the plan elements to systematize, supplement, and improve the planning index for sustainability improvement in coastal facilities planning.

• Communications for Statistical Applications and Methods
• /
• 제19권1호
• /
• pp.129-134
• /
• 2012

In this paper we review a bi-aspect nonparametric test for the two-sample problem under the location translation model and propose a new one to accommodate a more broad class of underlying distributions. Then we compare the performance of our proposed test with other existing ones by obtaining empirical powers through a simulation study. Then we discuss some interesting features related to the bi-aspect test with a comment on a possible expansion for the proposed test as concluding remarks.

• 한국어학
• /
• 제62권
• /
• pp.171-194
• /
• 2014

In this paper, I seek to differentiate the meaning of the auxiliary verb '-e ka-' from imperfective aspect in Korean. The progressive in imperfective is expressed by the 'be+V-ing' in English and '-ko iss-' in Korean. However the '-e ka-' in Korean can express the gradual progress meaning. This is similar to the progressive of some state verbs. These verbs cannot express the progressive aspect but it is possible if they can express the change of state in sentence. It is more corresponding to the '-e ka-' than '-ko iss-' in Korean.