• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.127-133
• /
• 2001

In this study, the effect of the factors of a hydraulic modulator of ASMS was analysed. The modeling of ASMS was presented and the equation of ASMS was derived from the modeling. With this background, GUI analysis tool was developed. After the verification of the reasonability of simulation, the response of a hydraulic modulator is investigated through simulation of modeling. With this simulation, each behavior was predicted with changing the various parameters and determined the influenced factors to apply the designing process.

• Journal of the Korean Society of Earth Science Education
• /
• v.9 no.2
• /
• pp.173-185
• /
• 2016

Since Daejeon observatory has been built as the first astronomical science museum(ASM) whose theme is astronomy and space, many ASMs have been built or are being built by the governmental support. ASMs are requested to perform an important role as the educational venue that can be experienced the scientific activities for supplementing regular science education. This study investigated the analysis of the connection to astronomy-related contents of science curriculum revised in 2009 for exhibits of 17 ASMs. As a result, exhibits of ASMs show the low reflectivity to science curriculum and are very biased to standard of accomplishment. That is, they are not sufficient enough for the students to reach the learning objectives. However the astronomical scientific activities which are hard to be performed in regular school curriculum can be experienced at ASMs. Additionally, since exhibits of ASMs are easy to access and accept, they can provide the effective educational activities and learning effect. Therefore, ASMs have to be improved for supplementing regular science education through the informal curriculum of astronomical scientific activities by the producing and displaying good astronomy-related exhibits.

• Membrane and Water Treatment
• /
• v.9 no.3
• /
• pp.155-162
• /
• 2018

Process modeling with activated sludge models (ASMs) is useful for the design and operational improvement of biological nutrient removal (BNR) processes. Effective utilization of ASMs requires the influent fraction analysis (IFA) of the wastewater treatment plant (WWTP). However, this is difficult due to the time and cost involved in the design and operation steps, thereby declining the simulation reliability. Harmony Search (HS) algorithm was utilized herein to determine the relationships between composite variables and state variables of the model IWA ASM1. Influent fraction analysis was used in estimating fractions of the state variables of the WWTP influent and its application to 9 wastewater treatment processes in South Korea. The results of influent $S_s$ and $Xs+X_{BH}$, which are the most sensitive variables for design of activated sludge process, are estimated within the error ranges of 8.9-14.2% and 3.8-6.4%, respectively. Utilizing the chemical oxygen demand (COD) fraction analysis for influent wastewater, it was possible to predict the concentrations of treated organic matter and nitrogen in 9 full scale BNR processes with high accuracy. In addition, the results of daily influent fraction analysis (D-IFA) method were superior to those of the constant influent fraction analysis (C-IFA) method.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.589-597
• /
• 2010

Strengthening the regulation standard of biological nutrient in wastewater treatment plant(WWTP), the necessity of repair of WWTP which is operated in conventional activated sludge process to advanced nutrient removal treatment is increased. However, in full-scale wastewater treatment system, it is not easy to fine the optimized operational condition of the advanced nutrient removal treatment through experiment due to the complex response of various influent conditions and operational conditions. Therefore, in this study, an upgrading design of conventional activated sludge process to advanced nutrient removal process using the modeling and simulation method based on activated sludge model(ASMs) is executed. And a design optimization of advanced treatment process using the response surface method(RSM) is carried out for statistical and systematic approach. In addition, for the operational optimization of full-scale WWTP, a correct analysis about kinetic variables of wastewater treatment is necessary. In this study, through partial least square(PLS) analysis which is one of the multivariable statistical analysis methods, a correlation between the kinetic variables of wastewater treatment system is comprehended, and the most effective variables to the advanced treatment operation result is deducted. Through this study, the methodology for upgrading design and operational optimization of advanced treatment process is provided, and an efficient repair of WWTP to advanced treatment can be expected reducing the design time and costs.

• Magazine of the Korean Society of Hazard Mitigation
• /
• v.7 no.4
• /
• pp.42-50
• /
• 2007

데이터에 입각한 과학적 안전관리시스템(Safety Management System, SMS)의 도입은 사후적 차원에 머물던 그간의 안전관리활동의 한계를 극복하고, 예방적 안전관리를 통하여 국가 항공안전증진에 획기적으로 기여할 것으로 기대된다. 이번 기고에서는 항공교통분야에 있어서 안전관리시스템(SMS)의 도입 현황과 함께 SMS의 핵심요소인 위험관리에 있어서, 평가된 위험이 시스템에서 정상적으로 관리되고 있는지 확인할 수 있는 안전평가(Safery Assessment) 개념에 대하여 국제민간항공기기(ICAO)에서 제시하는 개념들을 소개한다.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.889-896
• /
• 2012

In this study, simulation results of nitrogen and phosphorus removals and microbial activities for an $A_2O$ process in wastewater treatment plant are presented by using Activated Sludge Models (ASMs). Simulations were performed using pre-calibrated model and layout implemented in GPS-X simulation software. The models were used to investigate variations of SRT, water temperature, DO and C/N ratio effect on nutrients removal and microbial activity. According to the simulated results, the successful nitrification required SRT higher than 10.3 days, whereas increase of $NO_3$-N loading in the anaerobic reactor caused phosphorus release by PAOs; the effluent $NH_4$-N showed rapid change between $12^{\circ}C$(21.7 mg/L) and $13^{\circ}C$(3.2 mg/L); the effluent phosphorus was increased up to 1.9 mg/L at water temperature of $25^{\circ}C$; the DO increase was positive for heterotrophs and autotrophs growths but negative for PAOs growth; the PAOs showed low activity when C/N ratio was lower than 2.5. The experimental results indicated that the calibrated models can assure the prediction quality of the ASMs and can be used to optimize the $A_2O$ process.

• Journal of Advanced Navigation Technology
• /
• v.20 no.2
• /
• pp.141-147
• /
• 2016

Stable and reliable air traffic service is required for users (aircraft pilot, air traffic controller, airlines and public) through enhancing capability related to airport operation and continuously improving air navigation system. ASMS (air navigation service provider (ANSP) safety maturity survey) is to determine the level of management and safety requirement such as organization, risk, policy, process, training and environment in Air traffic service field. We designed and developed the survey (26 study areas of management part and 23 study areas of safety part) considering global best practices (Eurocontrol and FAA) and customizing domestic circumstances with quantitative level assessment regarding management and safety issue of Air navigation system. The survey enables the performance of Air navigation system to enhance and prevents from occurring accident or incident. Therefore, we provides best information with users as well as high quality Air traffic service.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.6
• /
• pp.403-411
• /
• 2008

The alignment of facial images is crucial for 2D face recognition. This is the same to facial meshes for 3D face recognition. Most of the 3D face recognition methods refer to 3D alignment but do not describe their approaches in details. In this paper, we focus on describing an automatic 3D alignment in viewpoint of quantitative analysis. This paper presents a framework of 3D face alignment and normalization based on feature points obtained by Active Shape Models (ASMs). The positions of eyes and mouth can give possibility of aligning the 3D face exactly in three-dimension space. The rotational transform on each axis is defined with respect to the reference position. In aligning process, the rotational transform converts an input 3D faces with large pose variations to the reference frontal view. The part of face is flopped from the aligned face using the sphere region centered at the nose tip of 3D face. The cropped face is shifted and brought into the frame with specified size for normalizing. Subsequently, the interpolation is carried to the face for sampling at equal interval and filling holes. The color interpolation is also carried at the same interval. The outputs are normalized 2D and 3D face which can be used for face recognition. Finally, we carry two sets of experiments to measure aligning errors and evaluate the performance of suggested process.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.55-61
• /
• 2007

In this paper, we propose a three-dimensional(3D) active shape models for medical image segmentation. In order to build a 3D shape model, we need to generate a point distribution model(PDM) and select corresponding landmarks in all the training shapes. The manual determination method, two-dimensional(2D) method, and limited 3D method of landmark correspondences are time-consuming, tedious, and error-prone. In this paper, we generate a 3D statistical shape model using the 3D model generation method of a distance transform and a tetrahedron method for landmarking. After generating the 3D model, we extend the shape model training and gray-level model training of 2D active shape models(ASMs) and we use the integrated modeling process with scale and gray-level models for the appearance profile to represent the local structure. Experimental results are comparable to those of region-based, contour-based methods, and 2D ASMs.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.727-734
• /
• 2020

Fault tolerant corrective control for asynchronous sequential machines (ASMs) with transient faults is discussed in this paper. The considered ASM is vulnerable to a kind of faults whose manifestation may arise during transient transitions of the ASM, leading to transient faults occurring in non-fundamental mode. To overcome adverse effects caused by these faults, we present a novel corrective control scheme that can detect and tolerate transient faults in non-fundamental mode. The existence condition and design algorithm for an appropriate fault tolerant controller is addressed in the framework of corrective control theory. The applicability of the proposed control methodology is demonstrated in the FPGA experiment.