• 제목/요약/키워드: ASCE

검색결과 205건 처리시간 0.024초

재분배기법을 이용한 고층건물의 풍응답 가속도 조절 설계기법 (Design Method to Control Wind-Induced Vibration of High-Rise Buildings Using Resizing Algorithm)

  • 서지현;박효선
    • 한국전산구조공학회논문집
    • /
    • 제23권5호
    • /
    • pp.465-473
    • /
    • 2010
  • 건물의 높이와 세장비가 증가함에 따라 건물의 최대 횡변위와 풍응답 가속도와 같은 사용성 요구조건을 만족시키는 것이 고층건물 구조설계에 있어서 중요한 설계요소가 되고 있다. 풍응답 가속도는 거주자에게 불쾌함을 유발시키는 직접적인 원인이 되지만, 초기 구조 설계단계에서 구조 설계자가 풍응답을 조절할 수 있는 실용적인 방법은 개발되어 있지 못하다. 본 연구에서는 재분배기법을 이용하여 건물의 강성을 조절함으로써 고층건물의 풍응답 가속도를 조절할 수 있는 방법을 제안하였다. ASCE 7-02, NBCC 95, ISO 6897 등의 설계 코드 및 기준에 의하면 고층건물의 풍응답 가속도는 1차 고유주기에 반비례한다는 사실에 근거하여 본 연구에서는 물량을 재분배하여 건물의 1차 고유주기를 조절함으로서 풍응답 가속도를 조절하는 실용적 풍응답 가속도 조절 설계법을 제안한다. 제안된 설계법은 42층 건물의 풍응답 가속도 조절 설계에 적용하여 그 적용성과 효율성을 평가하였다.

신형상의 합성용 평데크플래이트(ACE-DECk)의 휨성능에 대한 실험적 연구 (An Experimantal Study on the Flexible Capacity of New Shape Flat Deck Plate(ACE-DECK) for Using Composite Slabs Systems.)

  • 오상훈;장인화;배규웅;허병욱;양명숙
    • 한국강구조학회 논문집
    • /
    • 제13권3호
    • /
    • pp.265-277
    • /
    • 2001
  • 본 논문은 새롭게 개발된 신형상의 평데크플레이트를 사용한 합성슬래브의 휨성능에 대한 실험적 연구이다. 실험은 데크의 두께, 스팬, 토핑두께 및 단면형상 등을 변수로 하여 총 48개의 합성슬래브 단순휨 실험을 수행하여 휨성능을 평가하였으며 기존형의 절곡형 데크와 비교하였다. 실험결과, 신형상의 평데크플레이트가 기존의 절곡형에 비해서 강도, 초기강상, 평형능력 등에서 매우 우수한 성능을 나타냈으며 휨 강성을 나타내는 유효단면 2차 모멘트값은 기존의 ACI 규준식보다 ASCE 규준식에 보다 일치하는 것으로 나타났다. 실험결과를 내력, 강성 및 변형능력 등으로 구분하여 정리하여 나타냈다.

  • PDF

태풍 접근에 의한 바람 환경 변화가 건물에 미치는 영향 (Effects of Changing in Wind Environment of Typhoon Approaching to a Building)

  • 박종길;정우식;최효진
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 춘계학술대회 논문집
    • /
    • pp.561-564
    • /
    • 2009
  • In order to reduce damage from natural disasters, prevention activities through analysis and predicting based on meteorological factor and damage data is required. Other countries already have continuously studied on natural disasters and developed reducing disasters damage. But the risk assessment model for natural disaster is not to Korea. Therefore, a previous model of hurricane, Florida Public Hurricane Loss Model(FPHLM), is the basis and is applying to domestic situation. Accordingly, this study introduces the variables selecting process because input variables should be selected under Korea present state and be used. The estimating representative damage method would be necessary along with selecting housing types representing relevant areas because estimating damage amount of all over relevant areas housing was very hard during damage estimating process. But there is no exact representative housing types in the Korea. Therefore, we select housing types applicable to risk assessment model for natural disasters representing the Korea through previous studies and literature reviews. We using ASCE 7-98(Minimum Design Loads for Buildings and Other Structures, 1998) standard which estimated wind load using 3-second gust. ASCE 7-98 divided Main Wind Force Resistance System(MWFRS) and Component and Cladding(C&C) and it estimated wind load. Therefore, we estimate wind load affected by 3-second gust of a typhoon Maemi through calculating wind load process using selected representative detached house types in the process of selecting input variables for previous disaster predict model. The result of houses damage amount is about 230 hundred million won. This values are limit the 1-story detached dwelling, 19~29pyeong(62.81~95.56 $m^2$) of total area and flat roof. Therefore, this process is possible application to other type houses.

  • PDF

Probabilistic seismic assessment of structures considering soil uncertainties

  • Hamidpour, Sara;Soltani, Masoud;Shabdin, Mojtaba
    • Earthquakes and Structures
    • /
    • 제12권2호
    • /
    • pp.165-175
    • /
    • 2017
  • This paper studies soil properties uncertainty and its implementation in the seismic response evaluation of structures. For this, response sensitivity of two 4- and 12-story RC shear walls to the soil properties uncertainty by considering soil structure interaction (SSI) effects is investigated. Beam on Nonlinear Winkler Foundation (BNWF) model is used for shallow foundation modeling and the uncertainty of soil properties is expanded to the foundation stiffness and strength parameters variability. Monte Carlo (MC) simulation technique is employed for probabilistic evaluations. By investigating the probabilistic evaluation results it's observed that as the soil and foundation become stiffer, the soil uncertainty is found to be less important in influencing the response variability. On the other hand, the soil uncertainty becomes more important as the foundation-structure system is expected to experience nonlinear behavior to more sever degree. Since full This paper studies soil properties uncertainty and its implementation in the seismic response evaluation of structures. For this, response sensitivity of two 4- and 12-story RC shear walls to the soil properties uncertainty by considering soil structure interaction (SSI) effects is investigated. Beam on Nonlinear Winkler Foundation (BNWF) model is used for shallow foundation modeling and the uncertainty of soil properties is expanded to the foundation stiffness and strength parameters variability. Monte Carlo (MC) simulation technique is employed for probabilistic evaluations. By investigating the probabilistic evaluation results it's observed that as the soil and foundation become stiffer, the soil uncertainty is found to be less important in influencing the response variability. On the other hand, the soil uncertainty becomes more important as the foundation-structure system is expected to experience nonlinear behavior to more sever degree. Since full probabilistic analysis methods like MC commonly are very time consuming, the feasibility of simple approximate methods' application including First Order Second Moment (FOSM) method and ASCE41 proposed approach for the soil uncertainty considerations is investigated. By comparing the results of the approximate methods with the results obtained from MC, it's observed that the results of both FOSM and ASCE41 methods are in good agreement with the results of MC simulation technique and they show acceptable accuracy in predicting the response variability.

플랜트 탱크의 좌굴 거동에 근거한 풍하중 설계기준 비교 연구 (Comparison of Wind Load Provisions Based on the Wind Buckling Behaviors of Plant Tank)

  • 배두병;박일규;박장호;오창국
    • 한국강구조학회 논문집
    • /
    • 제28권3호
    • /
    • pp.203-211
    • /
    • 2016
  • 국내의 플랜트 탱크 설계를 위한 풍하중 기준은 KS B 6283 액체 저장 탱크의 내풍압 및 내진에 대한 설계 요건 등 여러기준에 제시되어 있으나, 그 내용이 서로 다르고 연관성도 없으며 실제의 풍하중을 반영하고 있는지 명확하지 않다. 국내 풍하중 기준의 정당성을 평가하고 적합한 풍하중 기준을 제안하기 위해 외국의 저장 탱크 설계를 위한 대표적 기준인 API 650, ASCE 7-10, EN 1991-1-4의 풍하중 기준 들과 비교분석하였다. 풍동 실험이 수행되어 보고된 논문에 적용된 탱크 제원을 적용하여 기본적으로 각 기준에 의한 압력계수 Cp값을 산정해 비교하고, 탱크 지붕 높이와 지름 비(f/d) 및 탱크 깊이 및 지름 비(h/d)를 변수로 한 각 기준에 의한 풍하중 좌굴해석을 수행하였다. 결과를 분석 종합하여 실제 풍하중에 의한 좌굴 거동을 반영하면서도 설계 시 쉽게 적용할 수 있는 풍하중 기준을 제안 하였다.

Towards performance-based design under thunderstorm winds: a new method for wind speed evaluation using historical records and Monte Carlo simulations

  • Aboshosha, Haitham;Mara, Thomas G.;Izukawa, Nicole
    • Wind and Structures
    • /
    • 제31권2호
    • /
    • pp.85-102
    • /
    • 2020
  • Accurate load evaluation is essential in any performance-based design. Design wind speeds and associated wind loads are well defined for synoptic boundary layer winds but not for thunderstorms. The method presented in the current study represents a new approach to obtain design wind speeds associated with thunderstorms and their gust fronts using historical data and Monte Carlo simulations. The method consists of the following steps (i) developing a numerical model for thunderstorm downdrafts (i.e. downbursts) to account for storm translation and outflow dissipation, (ii) utilizing the model to characterize previous events and (iii) extrapolating the limited wind speed data to cover life-span of structures. The numerical model relies on a previously generated CFD wind field, which is validated using six documented thunderstorm events. The model suggests that 10 parameters are required to describe the characteristics of an event. The model is then utilized to analyze wind records obtained at Lubbock Preston Smith International Airport (KLBB) meteorological station to identify the thunderstorm parameters for this location, obtain their probability distributions, and utilized in the Monte Carlo simulation of thunderstorm gust front events for many thousands of years for the purpose of estimating design wind speeds. The analysis suggests a potential underestimation of design wind speeds when neglecting thunderstorm gust fronts, which is common practice in analyzing historical wind records. When compared to the design wind speed for a 700-year MRI in ASCE 7-10 and ASCE 7-16, the estimated wind speeds from the simulation were 10% and 11.5% higher, respectively.

비틀림 비정형을 갖는 철골특수모멘트골조의 내진성능평가 - I 내진설계 (Seismic Performance Evaluation of Special Moment Steel Frames with Torsional Irregularities - I Seismic Design)

  • 한상환;김태오;하성진
    • 한국강구조학회 논문집
    • /
    • 제29권5호
    • /
    • pp.361-368
    • /
    • 2017
  • 지진하중 하에서 구조물의 강성중심과 질량중심이 차이가 날 경우에 편심이 발생하여 비틀림을 유발한다. ASCE 7-10에서는 이를 비틀림 비정형으로 규정하고 있으며, 비틀림 비정형 구조물의 내진설계를 위한 요구사항들을 제시하고 있다. 본 연구에서는 편심이 다른 3층, 9층 철골 모멘트 골조의 3차원 시간이력해석 결과를 기반으로 비틀림 비정형 철골조에 적용되는 내진설계기준의 요구조건에 대한 영향을 평가하였다. 그 결과, 편심이 증가할수록 적절히 설계된 구조물의 성능이 우수하며 소성힌지의 분포가 정형 구조물과 유사한 것으로 나타냈다.

벽식구조 아파트건물의 강재이력형 댐퍼 적용성 평가 (Applicability of the Hysteretic Steel Dampers to the Shear-wall Dominant Apartment Buildings)

  • 천영수;박지영
    • 토지주택연구
    • /
    • 제3권4호
    • /
    • pp.407-413
    • /
    • 2012
  • 이 연구에서는 국내 아파트 건물의 주요 횡력저항시스템인 전단벽식 구조를 대상으로 제진장치의 적용 가능성을 검토해 보았다. 연구목적 달성을 위하여 ASCE/SEI 7-10 제진구조물 설계방법을 현재 설계 중이거나 이전에 설계된 4개의 대표적인 전단벽식 아파트에 적용하여 내진성능 확보를 위하여 요구되는 제진장치의 성능에 대하여 조사하였다. 연구결과, 전단벽식 아파트에 제진장치를 이용하여 내진성능을 확보하기 위해서는 탄성강성이 높은 전단벽의 영향으로 인하여 제진장치의 강성이 매우 커야 함을 알 수 있었다. 이와 같은 높은 강성의 제진장치는 현실적으로 구현하기 매우 어려울 수 있으므로 전단벽식 건물에 제진장치를 설계할 때 주의하여야 하며, 벽량이 많은 전단벽식 건물의 경우 강재이력형 제진장치의 적용에 한계가 있는 것으로 판단된다.

댐퍼 스트럿 형상에 따른 의존성 평가 (Dependency Evaluation According to Damper Strut Type)

  • 이현호
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제18권5호
    • /
    • pp.78-86
    • /
    • 2014
  • 본 연구의 목적은 I형 스트럿 및 S형 스트럿 강재댐퍼의 변위 및 속도의존성을 평가하는 것이다. 이를 위하여 12개의 강재댐퍼를 제작하여 의존성 평가를 실시하였으며, 시험 변수는 스트럿 형상, 목표 변위 및 속도이다. 의존성 시험에 의한 반복횟수 평가결과, ASCE 7-10에서 규정한 최소 반복횟수 5회를 충분히 상회하는 것으로 평가되었다. 변위의존성 평가결과, 큰 목표변위 (50mm)의 반복횟수 및 누적에너지소산능력은 적은 목표변위 (25mm)에 비하여 감소하였다. 또한 짧은 목표변위보다 큰 항복강도 및 조기파단을 나타내었다. 속도의존성 평가에서는 빠른 목표속도 (60mm/sec)의 반복횟수 및 누적에너지소산능력이 느린 목표속도 (40mm/sec)에 비하여 감소하였다. 결과적으로 강재댐퍼의 기본 물성, 의존성 평가, 누적에너지소산능력 평가결과, S형 스트럿을 가지는 강재댐퍼의 의존 능력이 I형보다 윌등히 우수한 것으로 평가되었다.

원전시설의 내진성능평가를 위한 입력지반운동의 최소개수 (Minimum Number of Input Ground-motions to Assess Seismic Performance of Nuclear Facilities)

  • 홍기증;최지혜;김현욱;주광호
    • 한국지진공학회논문집
    • /
    • 제20권5호
    • /
    • pp.341-349
    • /
    • 2016
  • Currently, researches are being actively conducted in assessing seismic performance of nuclear facilities in USA and Europe. In particular, applying this technique of assessing seismic performance to design of isolation systems in nuclear power plants is being performed and then ASCE 4 Draft (2013) is being revised accordingly in the United States. In order to satisfy the probabilistic performance objectives described by seismic responses with certain confidence levels (ASCE 43, 2005), the probability distributions of these responses have to be defined. What is the minimum number of input ground-motions to obtain the probability distribution precise enough to represent the unknown actual distribution? Theoretical basis, for how to determine the minimum number of input ground-motions for given a logarithmic standard deviation to approximate the unknown actual median of the log-normal distribution within a range of error at a certain level of confidence, is introduced by Huang et al. (2008). However, the relationship between the level of confidence and the range of error is not stated in the previous study. In this paper, based on careful reviews on the previous work, the relationship between the level of confidence and the range of error is logically and explicitly stated. Furthermore, this relationship is also applied to derive the minimum number of input ground-motions in order to approximate the unknown actual logarithmic standard deviation. Several recommendations are made for determining the minimum number of input ground-motions in probabilistic assessment on seismic performance of facilities in nuclear power plants.