• Transactions on Electrical and Electronic Materials
• /
• 제11권6호
• /
• pp.266-270
• /
• 2010

The effect of an Ar plasma treatment on polycarbonate substrates was investigated using $TiO_2$ coatings produced by reactive ion-beam assisted sputtering. The typical pressure used during sputtering was about $10^{-4}$ Torr. After the Ar plasma treatment, the contact angle of a water droplet was reduced from $88^{\circ}$ to $52^{\circ}$ and then further decreased to $12^{\circ}$ with the addition of oxygen into the chamber. The surface of the polycarbonate substrate hanged from hydrophobic to hydrophilic with these treatments and revealed its changing nano-scale roughness. The $TiO_2$ films on the treated surface showed various colors and periodic ordering dependant on the film thickness due to optical interference.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.103-106
• /
• 2006

Semiconductor laser diode has a reflective facet in a both-ends side fundamentally. Laser performance for improving, Anti-Reflection and High-reflection coating on the facet of semiconductor laser diode. To prevent internal feedback from both facets for realizing superluminescent diode and reducing the reflection-induced intensity noise of laser diode, it's key techniques are AR/HR coatings. In the study AR coating film were manufactured by Ion-Assisted Deposition(IAD) system. Then manufactured coating film measurement electrical properties(L-I-V, Se, Resistor) and Optical properties (wavelength FFP)

• 전자통신동향분석
• /
• 제34권2호
• /
• pp.10-18
• /
• 2019

Since the introduction of CRT(Cathode Ray Tube) in the 1950s, display technologies have been developed continuously. Flat panel displays such as PDP(Plasma Display Panel) and LCD(Liquid Crystal Display) were commercialized in the late 1990s, and OLED(Organic Light Emitting Diodes) and Micro-LED(Micro-Light Emitting Diodes) are now being developed and are becoming widespread. In the future, we expect to develop ultra-realistic, flexible, embedded sensor displays. Ultra-realistic display can be applied to AR/VR(Augmented Reality/Virtual Reality) devices and spatial light modulators for holography. The sensor-embedded display can be applied to robots; electronic skin; and security devices, including iris recognition sensors, fingerprint recognition sensors, and tactile sensors. AR/VR technology must be developed to meet technical requirements such as viewing angle, resolution, and refresh rate. Holography requires optical modulation technology that can significantly improve resolution, viewing angle, and modulation method to enable wide-view and high-quality hologram stereoscopic images. For electronic skin, stable mass production technology, large-area arrays, and system integration technologies should be developed.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.248-251
• /
• 2009

We have investigated the effect of the quality of 1.3 um distributed feed back laser diode (DFB-LD) on the design of anti-reflection (AR) coatings. Optimal condition of AR coating to prevent internal feedback from both facets and reduce the reflection-induced intensity noise of laser diode was simulated with Macleod Simulator. Coating materials used in this work were ${Ti_3}{O_5}$ and $SiO_2$, of which design thickness were 105 nm and 165 nm, respectively. AR coating films were deposited by Ion-Assisted Deposition system. The electrical and optical properties of 1.3 um laser diode were characterized by Bar tester and Chip tester. Threshold current and slop-efficiency of DFB-LD were 27.56 mA 0.302 W/A. Far field pattern and wavelength of DFB-LD were $22.3^{\circ}(Horizontal){\times}24.4^{\circ}$ (Vertical), 1313.8 nm, respectively.

• 한국광학회지
• /
• 제8권1호
• /
• pp.1-6
• /
• 1997

역변환 문제(Inverse Problem)로 접근하여 상면에서의 최초 진폭임펄스 S$_{0}$(x)를 Gauss 함수 g$_{1}$(x), -1/2g$_{2-}$ (x+.DELTA.x$_{1}$), -1/2g$_{2+}$(x-.DELTA.x$_{1}$)를 중첩하여 설정하였다. 이를 Inverse Fourier Transform으로 동함수 A(.omega.)를 구하고, 유한구경 (-.omega.$_{0}$~+.omega.$_{0}$)에서 A(.omega)를 Fourier Transform하여 회절상의 진폭임펄스(Amplitude Impulse) S(x)를 구하였다. .lambda.=193nm, NA=0.5인 광학계에서 S(x)의 반치폭, 즉 1/2(FWHM)을 수치계산하여 49nm를 얻었다. 이는 Rayleigh 한계분해능 .epsilon.$_{R}$의 반, 1/2.epsilon.$_{R}$=96.5nm 보다 작으므로 초분해능 광학계임을 알 수 있다. OTF를 구하여 광학계의 성능을 평가한 결과 고주파영역에서 성능이 우수함을 알 수 있었다. 광학계는 Twyman-Green 간섭계를 포함하는 간섭결상계가 되고, Gauss 진폭변조판은 Polysiloxane Glass Resin을 사용하여 만들 수 있음을 제안하였다.제안하였다.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.177-184
• /
• 2012

A hologram projects a 3 dimensional video as same as a real subject and it is made by principles of holography. Many researches about holographic technology have been developed. Studies for visualization of 3D videos, holographic storages, and optical media have proceeded mostly in engineering. It is hard to find any researches about the convergent system from the viewpoint of interactive elements and motion graphic design such as this paper's concept. Most studies of augmented reality have been developed in the domain of technology and education but the field of content production. AR has been convergent with various fields and media, so it is time to make an active progress in the study of convergent content development. The goal of this study is to develop cultural contents and create new values through the convergence of holography and AR. The purpose of this paper is to propose the way of developing the convergent type of cultural contents and construct the production system by the new approach to users using the convergence technology of holography and augmented reality.

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.44-51
• /
• 1995

Homogeneous, compositionally graded, and superlattice-like silicon oxynitride(SiON) dielectric layers, with the refractive index varying from 1.46 to 2.05 as a function of film thickness, were grown by computer-controlled plasma-enhanced chemical vapor deposition (PECVD) using silane, nitrogen, and nitrous oxide reactant gases. An antireflection(AR) coating and thin-film electroluminescent(TFEL) devices with multiple dielectrics were designed and fabricated using real time control of reactant gases of the PECVD system.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.186-194
• /
• 2004

Micro-stereolithography is a newly proposed technology as a means that can fabricate a 3D micro-structure of free form. It makes a 3D micro-structure by dividing the shape into many slices of relevant thickness along horizontal surfaces, hardening each layer of slice with a focused laser beam, and stacking them up to a desired shape. In this technology, differently from the conventional stereolithography, scale effect is dominant. To realize micro-stereolithography technology, we developed the micro-stereolithography apparatus which is composed of an Ar+ laser, x-y-z stages. controllers. optical devices and scan path generation software. Related processes were developed, too. Using the system, a number of micro-structures were successfully fabricated. Some of these samples are shown for prove this system. Laser scan path generation algorithm and software considering photopolymer solidification phenomena as well as given 3D model were developed. Sample fabrication of developed software shows relatively high dimensional accuracy compared to the uncompensated result.

• 한국멀티미디어학회논문지
• /
• 제21권10호
• /
• pp.1162-1170
• /
• 2018

This paper presents an augmented reality system for multiple users. The proposed system performs ar image-based pose estimation of users and pose of each user is shared with other uses via a network server. For camera-based pose estimation, we install multiple markers in a pre-determined space and select the marker with the best appearance. The marker is detected by corner point detection and for robust pose estimation. the marker's corner points are tracked by optical flow tracking algorithm. Experimental results show that the proposed system successfully provides an augmented reality application to multiple users even when users are rapidly moving and some of markers are occluded by users.

• 한국광학회지
• /
• 제8권3호
• /
• pp.183-188
• /
• 1997

색분리 필터는 하나의 파장영역에서는 고반사, 다른 파장영역에서는 고투과를 제공하는 광학소자이다. 레이저를 이용한 디스플레이장치의 광학계를 구성하기 위해서는 정확한 색상의 분리가 요구되며, 광학계 효율 측면에서 매우 중요하다. 본 연구에서는 Kr-Ar laser(혼합 gas)빔을 R.G.B 삼색으로 분리하여 화상을 구현하기 위한 미러와 필터를 아래와 같은 특성을 만족하도록 설계 및 제작하였고, 그 특성은 45.deg./S-편광된 빔을 입사시켜서 1) R(반사율)>99% 450~493 nm, T(투과율)>90% 509~685 nm 2) R(반사율)>99% 509~685 nm, T(투과율)>90% 450~493 nm 3) R(반사율)>99% 509-585 nm, T(투과율)>90% 600~683 nm를 각각 만족하는 소자로 색분리를 실현하여 레이저 프로젝션 시스템을 구성하는데 사용하였다.