• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.523-528
• /
• 2011

Subway becomes more and more main transportation in major cities. Air pollution in the subway platforms is decreased; however, dust flow inside subway tunnel and train is increased by installing Platform Screen Door. Airflow inside subway tunnel is observed using computational method in this study The airflow characteristics around ventilation shafts and inside the tunnel is studied following the train movement, while the train moves from existing Miasamgeori station to Gireum station ANSYS CFX V12.0.l and ICEM CFD V12.0.l are used to compute the airflow inside the subway tunnel.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.154-154
• /
• 2012

Many suggestions is offered to resolve global warming. Tidal current generation is producing power by switched tidal difference sea water horizontal fluid flow produced by tidal difference using rotor and generator. So, change the angle of inflow condition due to the entrance of efficiency are considered. We therefore investigated three dimensional flow analysis and performance evaluation using commercial ANSYS-CFX code for horizontal axis turbine. Then We also studied three dimensional flow characteristics of a rotating rotor and blade surface streamlines around a rotor. As a result, Cp was highest at TSR 5.5, especially the larger changes in the angle of inflow condition decreased efficiency.

• Applied Science and Convergence Technology
• /
• 제26권1호
• /
• pp.1-5
• /
• 2017

The spurt vacuum pump is widely used to transfer sludge and slurry, and to control flow rate in a variety of processing fields, such as the oil, chemical, and fiber industries. The efficiency of the pump depends on the design parameters of the impeller, such as the number of blades, and the blade angle. In this study, the effect of the configuration of the impeller discharge angle of a spurt vacuum pump, which influences total head, shaft power, and efficiency, was numerically investigated using the commercial code, ANSYS CFX ver. 16.1. In addition, the performance of the pump was evaluated on the basis of the correlations between the total head, pump efficiency, and pressure distribution.

• EDISON SW 활용 경진대회 논문집
• /
• 제1회(2012년)
• /
• pp.45-48
• /
• 2012

본 연구는 인력기를 개발함에 있어서 이에 적합한 프로펠러의 형상을 설계하기 위하여 진행되었다. 인력기는 인간을 유일한 동력원으로 사용하기 때문에 적은 동력, 낮은 RPM을 가지고 비행을 하게 된다. 이에 따라 기존의 항공기와는 다른 특성 및 형상을 가지는 프로펠러 개발의 필요성이 인지되었다. 본 연구에서는 설계하고자 하는 인력기의 제원에 맞는 프로펠러의 특성을 설정한 뒤, 프로펠러의 블레이드를 수 개의 airfoil section으로 나누고, 각 섹션에 대한 공력 특성을 프로펠러 이론 및 Edison CFD를 통하여 계산 및 유추하였다. 이 계산 결과를 토대로 구한 각 airfoil section의 정보를 통하여 프로펠러의 형상을 얻어 낼 수 있었으며, 최종적으로 이를 ANSYS Fluent, CFX와 같은 상용 프로그램을 이용하여 분석함으로써 설계 전에 목표로 하였던 프로펠러의 성능에 도달하였는가를 확인할 수 있었다.

• 한국유체기계학회 논문집
• /
• 제19권2호
• /
• pp.16-20
• /
• 2016

Design optimization of a transonic compressor rotor(NASA rotor 37) was carried out using response surface method(RSM) which is one of the optimization methods. A numerical simulation was conducted using ANSYS CFX by solving three-dimensional Reynolds-averaged Navier Stokes(RANS) equations. Response surfaces that were based on the results of the design of experiment(DOE) techniques were used to find an optimal shape of blade which has the maximum aerodynamic performance. Two objective functions, viz., the adiabatic efficiency and the loss coefficient were selected with three design configurations to optimize the blade shape. As a result, the efficiency of the optimized blade is found to be increased.

• 한국유체기계학회 논문집
• /
• 제14권6호
• /
• pp.54-60
• /
• 2011

This paper presents the steady-state performance analysis of the first stage of a multistage centrifugal pump, composed of a shrouded-impeller, a vaned-diffuser and a return-channel, using the commercially available computational fluid dynamics (CFD) code, ANSYS CFX. The detailed flow fields in the vaned-diffuser with outlet in its side wall and the return-channel are investigated by the CFD code adopted in the present study. The effect of the vaned-diffuser with a downstream crossover bend and the corresponding return-channel on the overall hydrodynamic performance of the first stage pump has also been demonstrated over the normal operating conditions. The predicted hydrodynamics for the diffusing components herein could provide useful information to match the inlet blade angle of the next stage impeller for improving the multistage pump performances.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.606-609
• /
• 2009

Development of renewable energy is very important because of environmental problems caused by greenhouse effect. This is due to the use of fossil fuels which has serious consequences. Therefore, development of small hydropower can be a good countermeasure for the problems. The small hydropower is clean energy because the small hydropower generates few $CO_2$. Moreover, as the energy density by the small hydropower is high, it is economical for a society which wants to introduce the system. The purpose of this study is to improve the turbine performance. This study is about tubular-type hydro turbine among renewable energy that is based using the different water pressure level in pipe lines. The analysis was performed using the commercial CFD code ANSYS-CFX.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2012년도 춘계학술발표회 초록집
• /
• pp.472-475
• /
• 2012

MDF(Medium Density Fiberboard) 제조공정에 필요한 열매유(SHTF, Synthetic Heat Transfer Fluid)를 가열하는 보일러에서 화재가 발생하였다. 열매유 보일러는 1차 패스, 2차 패스, 3차 패스로 구성되어 있으며, 화재가 발생된 1차 패스 연소대 위쪽 14단 부근에서 열매유가 방출되었다. 화재확산으로 인한 조사내용 및 데이터를 토대로 화재 시뮬레이션용 전산유체역학인 ANSYS-CFX를 이용하여 재현하고 화재 모델링 해석 및 분석을 통해 화재 온도를 산정하고 피해의 범위를 규정하였다. 본 화재 사고로 설비의 운전 및 소재에 대한 피해를 규정하고, 이론에 의한 과학적인 정밀 조사를 실시하여 향후의 안전 운전을 위한 제안을 하고자 한다.

• 한국가시화정보학회지
• /
• 제4권2호
• /
• pp.81-87
• /
• 2006

In this paper, we present flow patterns around and performance of an air-flow separator by using the numerical analysis. With this separator, particles of different density are to be separated by using the drag force from the air flow. The low-density particles are designed to be separated by using inhalation through holes on a rotating drum. To obtain the flow informations needed for determining the proper design parameters, we have performed numerical simulations by using a commercial code, ANSYS CFX. Various parameter set was tested and it was found that depending on the design of drums there exist critical parameter set regarding the attachment of light particles on the drum, which is prerequisite for the separation of materials. We present here the possibility of using the present design in separation of particles mixed in the clod for use in recycling.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.300-305
• /
• 2012

The vibration and stress analysis program of comprehensive vibration assessment program (CVAP) is to verify theoretically the structural integrity of reactor vessel internals (RVI) and to provide the basis for selecting the locations monitored in measurement and inspection programs. This paper covers the verification of the vibration and stress analysis methodology of APR1400 RVI CVAP. The analysis methodology was developed to use 3-dimensional hydraulic and structural models with ANSYS and CFX. To validate the methodology, the hydraulic loads and structural reponses of OPR1000 were predicted and compared with the calculated and measured data in the OPR1000 RVI CVAP. Since the results predicted with this methodology were close to the measured values considerably, it was confirmed that the analysis methodology was developed properly.