• Asian Journal of Atmospheric Environment
• /
• v.9 no.4
• /
• pp.272-279
• /
• 2015

The information about the dispersion and scavenging of traffic-related pollutants at the locations near busy expressways is very helpful to highway planners for developing better plans to reduce exposures to air pollution for people living as well as children attending schools and child care centers near roadways. The objective of the current study was to give information in the dispersion and scavenging of vehicle-derived pollutants at the region near a busy urban expressway by a combination of two different model calculations. The modified Gaussian dispersion model and the Lagrange type below-cloud scavenging model were applied to evaluate $NO_x$ dispersion and DEP (Diesel exhaust particles) wet removal, respectively. The highest $NO_x$ was marked 53.17 ppb within 20-30 meters from the target urban expressway during the heaviest traffic hours (08:00AM-09:00AM) and it was 2.8 times higher than that of really measured at a nearby ambient measuring station. The calculated DEP concentration in size-resolved raindrops showed a continuous decreasing with increasing raindrop size. Especially, a noticeable decrease was found between 0.2 mm and 1.0 mm raindrop diameter.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1425-1430
• /
• 2024

This study develops superheated emulsion detectors that are both sensitive to fast neutrons, and thermal neutrons owing to the exergonic ⁶₃Li(n, α)³₁H capture reaction caused by the ⁶Li-containing compound dispersed throughout the gel-like medium. The experimental research was conducted on two SEDs. One detector was an ordinary Freon-12 detector and the other was a Freon-12 detector containing 3.4 % (by weight) LiCl. In order to investigate the sensitivity of lithium-containing SEDs to thermal neutrons, two types of SEDs were simultaneously exposed to various flux levels of thermal neutrons from ²⁴¹Am-Be neutron source inside a cylindrical tank filled with water. A Boron-lined proportional counter was used to estimate the thermal neutron flux and the relevant MCNP code was developed for flux and dose calculations in the prepared set-up around ²⁴¹Am-Be source. The results demonstrate that there is a proportional relationship between the variations of SED response and the change in thermal neutron flux and dose. Also, the sensitivity of SED was estimated.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.48-52
• /
• 2002

Using several molecular modeling programs we have performed computer simulations to investigate the complexation behaviors of an ester derivative of p-tert-butylcalix[5]arene (1e) toward a variety of butylammonium ions. Semi-empirical AM1 method was used for calculating the binding energies and the formation enthalpies. MM and CVFF forcefields for molecular mechanics calculations were adapted to express the complexation energies of the host. Molecular dynamics were performed to the calculated complex systems to simulate the ionophoric behavior of the host-guest complexes. The absolute Gibbs free energies of the host (1e) complexed with four kinds of butylammonium ions have been calculated using the Finite Difference Thermodynamic Integration (FDTI) method in Discover. Calculation results show that the trend in complex formation is n-$BuNH_3^+$ > iso-$BuNH_3^+$ >> sec-$BuNH_3^+$ > tert-$BuNH_3^+$, which is in good agreement with the experimental results.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.241-244
• /
• 2002

Using ab initio method, we have studied the structural stabilities, the electronic structures and properties between the two isomers with $C_{2h}$ and $C_{2v}$ symmetry of AlN four-membered-ring single precursors $[Me_2AlNHR]_2$ (R = Me, $^iPr$, and $^iBu$). In the viewpoint of bond lengths in optimized structures, the N-C bonds are considerably affected by the change of the R groups bonded to nitrogen, but the bonding characters of the Al-N and Al-C bonds are little affected. Also the structural stabilities between the two isomers with $C_{2h}$ and $C_{2v}$ symmetry by using Hartree-Fock (HF) and the second order Moeller-Pleset (MP2) calculations agree well with the experimental results for the relative stability of bis(dimethyl- m-isopropylamido-aluminum) (BDPA) and bis(dimethyl- m-t-butylamido-aluminum) (BDBA), while the semiempirical AM1 and PM3 calculations for BDPA were reverse. Thus, our results may aid in designing an optimum precursor for a given process by explaining the experimental results through the elimination of the R groups bonded to nitrogen.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.9
• /
• pp.827-831
• /
• 1995

Kinetic studies on the reactions of five secondary acylic alkyl arenesulfonates with anilines are carried out in acetonitrile at 65.0 ℃. The magnitude of ρXZ determined (ρXZ=0.12-0.13) is slightly greater than that for the alicyclic series (ρXZ=0.11) under the same experimental condition. Ab initio MO results are found to support the slightly tighter transition state expected from the greater magnitude of ρXZ for the acyclic series. Despite the small variations, the magnitude of ρXZ and the theoretical transition state tightness remain relatively constant for the secondary carbon centers. Secondary kinetic isotope effects involving deuterated aniline nucleophiles show a successively smaller kH/kD(<1.0) value for a more sterically crowded reaction center carbon. This is in accord with the later transition state for bond-making predicted by the Bell-Evans-Polanyi principle for the more endothermic nucleophilic substitution reaction. Further support is provided by the results of the AM1 MO calculations on the reactions of secondary alkyl benzenesulfonates with chloride nucleophile.

• Nuclear Engineering and Technology
• /
• v.32 no.5
• /
• pp.457-464
• /
• 2000

In this paper, we describe the results of various calculations performed for a design of the thickness gauges that use the gamma-ray backscattering method. The radiation source is assumed to be the $_{24}$1Am(60keV gamma-ray) and the detector is a single crystal scintillator in a cylindrical form. The source is located at the center of the detector with the collimator of a cylindrical shape. First, when gamma-rays are incident on a material with a constant angle, we compute the variations of the spectrum for the photons scattered into different angular intervals. Next, we compute for an optimal size for the collimator cylinder for a fixed detector size and an optimal distance from the detector to the material. Finally, we compute the number of observed photons for different thickness of two different materials, a plastic film and an Al foil.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.62-67
• /
• 1993

The microscopic origin of nonlinear optical properties of quinoline derivatives have been investigated theoretically using MOPAC-AM1 method. In order to prepare promising nonlinear optical active polymers of polyquinoline derivatives, the optimized positions of strong electron donor and electron acceptor are determined in the heterocyclic ring for the energetically favorable structures. For each compound, the effect of the substituted positions on the microscopic nonlinear coefficients were investigated. Polyquinoline was already evaluated to have outstanding physical and mechanical properties so that its monomeric analogues were designed and synthesized for developing new second and third order nonlinear optical main chain polymers. Using the MOPAC-AM1 method, properties calculated include the intrinsic ground-state dipole moments, the polarizabilities, first and second hyperpolarizabilities under the condition of finite-field $(\omega$ = 0).

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.67-76
• /
• 2009

The development of a variety of methods like AM1, PM3, PM5 and DFT now allows the calculation of atomic and molecular properties with high precision as well as the treatment of large molecules with predictive power. In this paper, these methods have been used to calculate a number of quantum chemical descriptors (like Klopman atomic softness in terms of $E_n^{\ddag}\;and\;E_m^{\ddag}$, chemical hardness, global softness, electronegativity, chemical potential, electrophilicity index, heat of formation, total energy etc.) for 75 alkanes to predict their boiling point values. The 3D modeling, geometry optimization and semiempirical & DFT calculations of all the alkanes have been made with the help of CAChe software. The calculated quantum chemical descriptors have been correlated with observed boiling point by using multiple linear regression (MLR) analysis. The predicted values of boiling point are very close to the observed values. The values of correlation coefficient ($r^2$) and cross validation coefficient ($r_{cv}^2$) also indicates the generated QSPR models are valuable and the comparison of all the methods indicate that the DFT method is most reliable while the addition of Klopman atomic softness $E_n^{\ddag}$ in DFT method improves the result and provides best correlation.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.9
• /
• pp.882-890
• /
• 2000

Ab initio calculations are carried out on protonation equilibria of 5-memberedheteroaromatic aldehydes (5MHAs;heteroatom Y = NH, O, PH,and S and substituentZ = NH2, OCH3, SCH3, CH3, H, Cl, CHO, CN,NO2) at the $MP2}6-31G*$ level. Naturalbond orbital (NBO) analyses show that the optimal localized natural Lewis structures of the protonated aldehydes,(P), are ortho (C3) protonated (for Y = O, PH and S) and N-pro-tonated (for Y = NH) forms in contrast to the standard structural Lewis formula for aldehydes, (R). The delo-calizability of ${\pilone}-pairon$ the heteroatom $(n{\pi}(Y))$ is in the order Y = NH > O > S > PH. The transmission efficiency of (Z) substituent effects to the carbonyl moiety run parallel to the delocalizability of $n{\pi}(Y)$ for R,but is dominantly influenced by the cationic charge on $C{\alpha}(C{\alpha}+)$ for P, which is in the reverse order of thede-localizability of $n{\pi}(Y).$ The Hammett ${\rho}values$ for variation of Z in the protonation are determined by the dif-ference in the transmission efficiencies between Pand R stateat simple interpretation of their magnitude is not warranted. However,the magnitude of the gas-phase ${\rho}z+$ values decreases as the level ofcomputation is raised from RHF/3-21G* to RHF/6-31G* and to $MP2}6-31G*$ but increases again at the MP4SDQ/6-31G* level. Further decrease occurs when solvent effect (water) is accounted for by the SCRF method. Comparison of the SCRF ${\rho}z+values$ with those determined in the aqueous acid solution for Y = S and CHCH shows inadequacy of accounting for the solvent effects on the ${\rho}values$ by a continuum model. It is noteworthy that semiempirical calculations, especially theAM1 method, give even lower magnitude of the gas-phase ${\rho}values.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.552-561
• /
• 2010

This study investigates the solubility of neptunium (Np) in the deep natural groundwater of the Korea Atomic Energy Research Institute Underground Research Tunnel (KURT). According to a Pourbaix diagram (pH-$E_h$ diagram) that was calculated using the geochemical modeling program PHREEQC 2.0, the redox potential and the carbonate ion concentration both control the solubility of neptunium. The carbonate effect becomes pronounced when the total carbonate concentration is higher than $1.5\;{\times}\;10^{-2}$ M at $E_h$ = -200 mV and the pH value is 10. Given the assumption that the solubility-limiting stable solid phase is $Np(OH)_4(am)$ under the reducing condition relevant to KURT, the soluble neptunium concentrations were in the range of $1\;{\times}\;10^{-9}$ M to $3\;{\times}\;10^{-9}$ M under natural groundwater conditions. However, the solubility of neptunium, which was calculated with the formation constants of neptunium complexes selected in an OECD-NEA TDB review, strongly deviates from the value measured in natural groundwater. Thus, it is highly recommended that a prediction of neptunium solubility is based on the formation constants of ternary Np(IV) hydroxo-carbonato complexes, even though the presence of those complexes is deficient in terms of the characterization of neptunium species. Based on a comparison of the measurements and calculations of geochemical modeling, the formation constants for the "upper limit" of the Np(IV) hydroxo-carbonato complexes, namely $Np(OH)_y(CO_3)_z^{4-y-2z}$, were appraised as follows: log $K^{\circ}_{122}\;=\;-3.0{\pm}0.5$ for $Np(OH)_2(CO_3)_2^{2-}$, log $K^{\circ}_{131}\;=\;-5.0{\pm}0.5$ for $Np(OH)_3(CO_3)^-$, and log $K^{\circ}_{141}\;=\;-6.0{\pm}0.5$ for $Np(OH)_4(CO_3)^{2-}$.