• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2223-2228
• /
• 2009

Dye sensitized solar cells(DSCs) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome such a low efficiency in a large size DSC. In this study, DSCs were fabricated by an electrospray coating method for the $TiO_2$ thin film. They were compared with DSCs prepared by conventional coating methods. We conducted an experiment to obtain the optimized parameters of voltage, flow rate, incident angle and distance in the electrospray method. After we fabricated $TiO_2$ film using that way, we investigated the characteristics of DSC through I-V Curve, SEM and EIS. This novel method shows stable performance with an energy conversion efficiency of 3.44 % under 1 sun illumination (AM 1, $P_{in}$ of $100\;mW/cm^2$).

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.53-60
• /
• 2018

The purpose of this study was investigating the effect of 3D printing technology that changes the speed of sound (SOS) and the broadband ultrasound attenuation (BUA) by controlling the density of the media phantom. We used 3D printers which called additive manufacturing (AM) by using material with polylactic acid (PLA). The inside of the medium phantom was filled crossly with 100%, 90%, 80%, 70%, 60%, and 50% of the material. The ultrasonic instrument measured the SOS and the BUA using a 0.55 MHz ultrasound output in opposing mode with a pair of transducers. As a result, the density of the medium phantoms with the SOS showed very high correlation (r = 0.944), but the SOS showed very low correlation (r = 0.500). It is expecting that the manufacturing and measurement method of the medium phantom using 3D printing technology will be used as basic data for ultrasonic bone mineral density.

• Communications for Statistical Applications and Methods
• /
• v.25 no.1
• /
• pp.15-27
• /
• 2018

Parametric method of flood frequency analysis involves fitting of a probability distribution to observed flood data. When record length at a given site is relatively shorter and hard to apply the asymptotic theory, an alternative distribution to the generalized extreme value (GEV) distribution is often used. In this study, we consider the beta-P distribution (BPD) as an alternative to the GEV and other well-known distributions for modeling extreme events of small or moderate samples as well as highly skewed or heavy tailed data. The L-moments ratio diagram shows that special cases of the BPD include the generalized logistic, three-parameter log-normal, and GEV distributions. To estimate the parameters in the distribution, the method of moments, L-moments, and maximum likelihood estimation methods are considered. A Monte-Carlo study is then conducted to compare these three estimation methods. Our result suggests that the L-moments estimator works better than the other estimators for this model of small or moderate samples. Two applications to the annual maximum stream flow of Colorado and the rainfall data from cloud seeding experiments in Southern Florida are reported to show the usefulness of the BPD for modeling hydrologic events. In these examples, BPD turns out to work better than $beta-{\kappa}$, Gumbel, and GEV distributions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.313.2-313.2
• /
• 2013

본 연구에서는 기존에 연구된 Solar Cell 보다 구조 및 제작이 단순한 $Al/Al_2O_3/Si$(100) Solar cell을 제작하여 평가하였다. 기판으로는 p-type Si(100), 0.5~2 ${\Omega}{\cdot}cm$을 사용하여 chemical cleaning 후 ALD(Atom Layer Deposition)법으로 Al2O3 터널링 절연막을 증착하였으며, 박막의 두께를 1~10 nm로 변화시켜 MIS 커패시터의 터널링 효과를 평가하였다. MIS 커패시터의 전기적 특성평가를 위해 누설전류 밀도-전계 특성은 pA meter/DC Voltage source를 사용하였고, 커패시턴스-전압특성, D-factor 특성은 precision LCR meter를 사용하였다. $Al/Al_2O_3/Si$(100) Solar cell의 특성평가를 위해 300~1100nm 파장영역에 따른 양자 효율을 평가하기 위해 Quantum Efficiency system (QE)을 사용하였고, Stanard Test Conditions 100 $mW/cm^2$, AM1.5, $25^{\circ}C$ 조건의 Voc, Isc, Jsc, FF (Fill Factor) 및 Efficiency(%)를 평가하기 위해 Solar simulator를 이용하였다.

• Applied Microscopy
• /
• v.48 no.4
• /
• pp.117-121
• /
• 2018

The multiple length scale analysis of previously designed Fe-Mn-Al-C based low-density model alloys reveals the difference in ordered ${\kappa}-carbide$, $(Fe,Mn)_3AlC_x$, between Fe-25Mn-16Al-5.2C (at%) alloy and Fe-3Mn-10Al-1.2C (at%) alloy. For the former alloy composition consisting of fully austenite grains, ${\kappa}-carbide$ showed majorly cuboidal and minorly pancake morphology and its chemical composition was not changed through aging for 24 h and 168 h at $600^{\circ}C$. Meanwhile, for the isothermally annealed ferritic alloy system for 1 hr at 500 and $600^{\circ}C$, the dramatic change in the chemical composition of needle-shape ${\kappa}-carbide$, $(Fe,Mn)_3(Fe,Al)C_x$, was found. Here we address that the compositional fluctuations in the vicinity of the carbides are significantly controlled by abutting phase, either austenite or ferrite. Namely, the cooperative ordering of carbon and Al is an important factor contributing to carbide formation in the high-Mn and high-Al alloyed austenitic steel, while the carbon and Mn for the low-Mn and high Al alloyed ferritic steel.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1012-1020
• /
• 2018

In order to improve the capability of mission flight of tiltrotor UAV that has been developed by Korea Aerospace Research Institute, a simulation study on the formation flight of autonomous control 5 level has been performed. The formation flight is based on the centralized method with leader and follower airplanes. The formation flight controller was verified through numerical simulation with 3 followers and hardware-in-the loop simulation with 1 follower. This paper describes controller design methods, hardware-in-the-looped simulation test, and performance verification using simulation.

• Korean Journal of Plant Resources
• /
• v.31 no.6
• /
• pp.719-724
• /
• 2018

Methicillin-resistant Staphylococcus aureus (MRSA) is a bacterium responsible for a number of infections in humans that are difficult to treat, and as a result, is a substantial contributor to morbidity and mortality. In the present study, in search of natural products capable of inhibiting this multidrug-resistant bacterium, we investigated the antimicrobial activity of Lysimachia clethroides Duby root. The antibacterial activities of EtOH extract of Lysimachia clethroides Duby root and its n-hexane, EtOAc, n-BuOH and water fractions were evaluated against 15 strains of methicillin-resistant staphylococcus aureus (MRSA) and 1 standard methicillin-susceptible S. aureus (MSSA) strain by using the minimal inhibitory concentrations (MICs) assay, colorimetric assay using MTT test, checkerboard dilution test. Antimicrobial activity of n-hexane fraction of Lysimachia clethroides Duby root was remarkable. Against the 16 strains, the minimum inhibitory concentrations (MICs) were in the range of $31.25-62.5{\mu}g/ml$ and FICI values for n-hexane fraction of Lysimachia clethroides Duby root+AM and n-hexane fraction of Lysimachia clethroides Duby root+OX were checkerboard method performed using the MRSA, MSSA and one clinical isolate strains via MICI 0.12-1 and 0.25-0.75, showing the increase of synergistic effect. When combined together, these antibiotic effects were dramatically increased. These effective combinations could be new promising agents in the management of MRSA.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.1
• /
• pp.44-52
• /
• 2019

This study examined the lifestyle factors, dietary attitudes, food habits, and dietary nutrition intake of college students before and after nutrition education. A total of 44 college students were recruited and a questionnaire survey was conducted. Dietary nutrient consumption was obtained from the one day 24-hr recall. Scores on 'Concerns about health (p<0.05)', 'Regular exercise (p<0.01)', and number of steps (p<0.001) were significantly higher after-training. The dietary attitude (31.3 vs. 33.7, p<0.01) and food habits (53.5 vs. 59.7, p<0.01) were significantly higher after-training. The scores on 'Eating a lot of food that I want to eat is more important than nutrition (p<0.01)', 'I am interested in information on nutrition and health (p<0.01)', 'Have three meals a day (p<0.01)', 'Have breakfast regularly (p<0.01)', 'Drink milk every day (p<0.001)', 'Have fruits every day (p<0.05)', and 'Apply nutrition knowledge to daily life (p<0.001)' were significantly higher after-training. Among the nutrients intakes, the protein (p<0.05), vitamin C (p<0.01), and calcium (p<0.001) were significantly higher after-training. Nutrition education improved the lifestyle factors, dietary attitudes, food habits, and dietary nutrition intakes.

• The Journal of Internal Korean Medicine
• /
• v.42 no.4
• /
• pp.707-717
• /
• 2021

Objectives: The aim of this study was to introduce the normalization effects of stimulation of both ST36 and CV11, 12, 13 meridian points on the abnormal gastric myoelectrical activity in two cases of functional dyspeptic patients with gastric dysmotility. Methods: Gastric myoelectrical activity was recorded by electrogastrography every two weeks until their gastric myoelectrical activity finally reached the normality. Dominant frequency of gastric slow waves in the fasting and postprandial periods and a dominant power ratio were obtained on each occasion. Patients were treated three times each day: 9 am, 1 pm, and 7 pm. The first treatment consisted of manual and immersion stimulation on all used meridian points for 20 min. In the second and third treatments, electrical stimulation of both ST36 was added. It was conducted for 20 min at a strength intensity of 1.2 times the pain threshold at a frequency of 3 Hz. Results: Stimulation of the above meridian points normalized abnormal gastric myoelectrical activity. The time taken to return from abnormal gastric myoelectrical activity to normal was 16-19 weeks. Conclusion: Stimulation of both ST36 and CV11, 12, 13 meridian points normalized the abnormal gastric myoelectrical activity in the functional dyspepsia of gastric dysmotility.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.116-124
• /
• 2021

In this study, the reliability of vehicle frames employed in small electric road sweepers was assessed through durability testing. The frames were tested under three conditions, whereby mechanical loads were applied to (1) the entire frame, (2) the front frame, and (3) the rear frame. The strain distributions in the loaded frames were determined through a combination of direct strain gauge measurements and supplementary numerical analysis. While subtle differences were observed between the experimental and numerical analyses, both methods successfully yielded comparable deformation patterns. Thus, the dependence of stress distribution and the state of the frame on loading conditions could be fully identified through our combined structural and numerical analysis.