• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.8
• /
• pp.3435-3442
• /
• 2015

Objective : To provide background information for strengthening cervical cancer prevention in the Pacific by mapping current human papillomavirus (HPV) vaccination and cervical cancer screening practices, as well as intent and barriers to the introduction and maintenance of national HPV vaccination programmes in the region. Materials and Methods: A cross-sectional questionnaire-based survey among ministry of health officials from 21 Pacific Island countries and territories (n=21). Results: Cervical cancer prevention was rated as highly important, but implementation of prevention programs were insufficient, with only two of 21 countries and territories having achieved coverage of cervical cancer screening above 40%. Ten of 21 countries and territories had included HPV vaccination in their immunization schedule, but only two countries reported coverage of HPV vaccination above 60% among the targeted population. Key barriers to the introduction and continuation of HPV vaccination were reported to be: (i) Lack of sustainable financing for HPV vaccine programs; (ii) Lack of visible government endorsement; (iii) Critical public perception of the value and safety of the HPV vaccine; and (iv) Lack of clear guidelines and policies for HPV vaccination. Conclusion: Current practices to prevent cervical cancer in the Pacific Region do not match the high burden of disease from cervical cancer. A regional approach, including reducing vaccine prices by bulk purchase of vaccine, technical support for implementation of prevention programs, operational research and advocacy could strengthen political momentum for cervical cancer prevention and avoid risking the lives of many women in the Pacific.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.352-356
• /
• 2003

A stoichiometric mixture of evaporating materials for $CuGaSe_2$ single crystal am films was prepared from horizontal electric furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CuGaSe_2$, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.615\;{\AA}\;and\;11.025\;{\AA}$, respectively. To obtain the single crystal thin films, $CuGaSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $450^{\circ}C$, respectively, The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuGaSe_2$ single crystal thin films measured with Hall effect by van der Pauw method are $9.24{\times}10^{16}\;cm^{-3}$ and $295\;cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)\;:\;1.7998\;eV\;-\;(8.7489\;{\times}\;10^{-4}\;eV/K)T^2(T\;+\;335\;K)$. After the as-grown $CuGaSe_2$ single crystal thin films was annealed in Cu-, Se-, and Ga-atmospheres, the origin of point defects of $CuGaSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{CU}$, $V_{Se}$, $CU_{int}$, and $Se_{int}$, obtained by PL measurements were classified as a donors or accepters type. And we concluded that the heat-treatment in the Cu-atmosphere converted $CuGaSe_2$ single crystal thin films to an optical n-type. Also, we confirmed that Ga in $CuGaSe_2/GaAs$ did not form the native defects because Ga in $CuGaSe_2$ single crystal thin films existed in the form of stable bonds.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.3
• /
• pp.147-156
• /
• 2008

Purpose: All acts which are enforced from the radioactive iodine therapeutic team is a in its own way principle and provision. Therefore unification of all acts can not be appropriately. We will make the standard coherence. Materials & Methods: From 5 November, 2007 to 17 November 2007, we conducted a questionnaire survey of the nuclear medicine manager of 30 hospitals. The contents of a questionnaire is medical treatment section, patient management, prosecuting attorney section, waste management and safety supervision in about the patient and a questionnaire was drawn up in the method which selects an item. Results: 30 hospital agencies are operating purely for I-131 high dose ablation therapy. Diagnostic study and daily schedule had the difference of some. The most of education for the patients took charge of doctor and nurse. The satisfaction of education was evaluated as the high thing. The safety supervision of waste management accomplishment and Safety supervision the patient and the worker observed on the basis of atomic energy law. Conclusion: Specific standards with sufficient amount of information and practical contents should have been presented through the following data. However, it seems to be lacking in many aspects. Nevertheless, respondents rated 70.9%, which is relatively high, on the value of clinical utilization, and I am very thankful for the evaluation. For many years from now, it may seem necessary for a lot of research on the specific matters based on these data to be conducted.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.159-164
• /
• 2009

Monomers of oxetane high explosives were theoretically examined in terms of reactivity, reaction mechanism and process of polymerization substituted by azido $(-CH_2N_3)$, nitrato $(-CH_2ONO_2)$ and hydrazino $(-CH_2N_2H_3)$ which belong to the 5th class hazardous materials and have explosiveness under acid catalyst using MINDO/3, MNDO, and AMI methods for formal charge, heat of formation, and energy level. Nucleophilicity and base of oxetane high explosives could be explained by negative charge size of oxetane oxygen atom and reactivity of oxetane in the growth stage of polymerization under acid catalyzer could be expected to be governed by positive charge size of axial carbon atom and low LUMO energy of electrophile. It could be estimated that carbenium ion was more beneficial in the conversion process of oxetane high explosives than that of stabilization energy (13.90~31.02 kcal/mole) of oxonium ion. In addition, concentration of oxonium ion and carbenium ion in equilibrium state influenced mechanism and it was also estimated that $S_N1$ mechanism reacts faster than that of $S_N2$ in prepolymer growth stage considering quick equilibrium based on form and calculation of polymerization under acid catalyzer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.2
• /
• pp.245-254
• /
• 1992

The purpose of this study was to evaluate the mechanical thermal resistances and comfort properties of ski wear made with vapor-permeable water repellent (VPWR) fabrics and thermal insulation battings. Four types of experimental clothing were made with the combination of two VPWR fabrics (Hipora-$TM^{\circledR}$, Hipora-$CR^{\circledR}$) and two thermal insulation battings ($Viwarm^{\circledR},\;Airseal^{\circledR}$). Thermal resistances of ski wear were objectly evaluated by thermal manikin experiment ($21{\pm}\;2^{\circ}C,\;50{\pm}5\%$ R.H.,0.25 m/sec air velocity) and thermographic accessment ($2{\pm}2^{\circ}C,\;0\%$ R.H.,0.25 m/sec air velocity, and emissivity level : 1). Garment wear tests of ski wear included the measurement of the microclimate (inner temp. and relative humidity) of the experimental clothing by digital thermohygrometer and subject wear sensation using McNall's thermal comfort ratings. CBo values of experimental clothing 4 (Hipora-$CR^{\circledR}+Airseal^{\circledR}$) and 1 (Hipora-$TM^{\circledR}+Viwarm^{\circledR}$) were significantly higher than those of 2 (Hipora-$TM^{\circledR}+Airseal^{\circledR}$) and 3 (Hipora-$CR^{\circledR}+Viwarm^{\circledR}$). Thermal resistances in the points of breast, back, belly, and loin was significantly higher than those of upper am, fore arm, and shank of measuring points on the thermal manikin. According to the color map of the thermogram, the experimental clothing 4 indicated higher surface temperatures than the others showing more yellowish spots on the surface of clothing. Inner temperature of experimental clothing was not significantly different among the four types of ski wear, but relative humidities of experimental clothing were significantly different. Relative humidities of experimental clothing 1 and 3 showed higher than those of 2 and 4. Relative humidity of experimantal clothing was affected largely by the thermal resis- tance of thermal insulation batting materials. The subject wear sensation of experimental clothing 2 and 4 showed lower humidity than the others. Subject wear sensation was affected more by humidity sensation than by thermal sensation.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.505-512
• /
• 2014

A new donor-accepter-donor-accepter-donor (D-A-D-A-D) type 2,1,3-benzothiadiazole-thiophene-based acceptor unit 2,5-di(4-(5-bromo-4-octylthiophen-2-yl)-2,1,3-benzothiadiazol-7-yl)thiophene ($DTBTTBr_2$) was synthesized. Copolymerized with fluorene and indeno[1,2-b]fluorene electron-rich moieties, two alternating narrow band gap (NBG) copolymers PF-DTBTT and PIF-DTBTT were prepared. And two copolymers exhibit broad and strong absorption in the range of 300-700 nm with optical band gap of about 1.75 eV. The highest occupied molecular orbital (HOMO) energy levels vary between -5.43 and -5.52 eV and the lowest unoccupied molecular orbital (LUMO) energy levels range from -3.64 to -3.77 eV. Potential applications of the copolymers as electron donor material and $PC_{71}BM$ ([6,6]-phenyl-$C_{71}$ butyric acid methyl ester) as electron acceptors were investigated for photovoltaic solar cells (PSCs). Photovoltaic performances based on the blend of PF-DTBTT/$PC_{71}BM$ (w:w; 1:2) and PIF-DTBTT/$PC_{71}BM$ (w:w; 1:2) with devices configuration as ITO/PEDOT: PSS/blend/Ca/Al, show an incident photon-to-current conversion efficiency (IPCE) of 2.34% and 2.56% with the open circuit voltage ($V_{oc}$) of 0.87 V and 0.90 V, short circuit current density ($J_{sc}$) of $6.02mA/cm^2$ and $6.12mA/cm^2$ under an AM1.5 simulator ($100mA/cm^2$). The photocurrent responses exhibit the onset wavelength extending up to 720 nm. These results indicate that the resulted narrow band gap copolymers are viable electron donor materials for polymer solar cells.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.2
• /
• pp.78-82
• /
• 2005

Fishermen have higher risk of occupational injuries and disease due to frequent machine usage and direct contact to live biological materials. Moreover, growing elderly workers makes the susceptibility to occupational injuries and disease higher. This study was performed to investigate the occupational safety and health status among fishermen. The interview was carried out at Jumunjin and Geojin ports which were representative port at North East side of Korea. The structured questionnaire were used to interview the fishermen from AM 6:00 to PM 11:00 and total respondent were 97 workers. The results were followed; 7 fishermen of all respondents experienced occupational injuries during their work, 5 fishermen were needed to admission longer than 4 days. The injury types were contusion(4 persons), fracture(1 persons) and amputation(2 persons). The cause of injury might be the lack of caution and the unstability of working condition. These results suggested the ergonomical evaluation of working condition and proper management. But there was limited concern and studies on the policy on occupational safety and health on fishermen. So, further study was required to establish the sound policy of fishermen's occupational safety and health.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1977

The sample persimmons were obtained from the of Yung-am Kun, Korea on October 24, and November 9, 1973. These persimmons were kept at room temperature overnight, then packed and stored on the following day at $0^{\circ}C$ and $85{\sim}100%$ humidity. Seven experimental items were studied : 1. control, 2. packing with excelsior in wooden boxes, 3. packing with rice hull in wooden boxes, 4. packing in bags of 0.03 mm polyethylene membrane, 5. packing in bags of 0.06 mm polyethylene membrane, 6. packing in bags of 0.08 mm polyethylene membrane, 7. packing in sealed desiccators. The dimension of polyethylene bags were $14{\times}28cm$ and three persimmons were packing in each bag. The results are as follows: 1. The persimmons both in polyethylene bags and in desiccators lost only 1 % or less of weight, while in control (1) packing with excelsior (2) or with rice hull (3) the loss was 6-7 % in weight after $2{\sim}3$ months. The persimmons became visibly shriveled and spongy-like in it's texture when it lost 5 % of weight. 2. Carbon dioxide content within the polyethylene bags and desiccators rapidly increased during the early storage period, and reached 5 % (in 0.03 mm polyethylene bags) to 50 % or more (in desiccator) after 1 month. In the polyethylene bags of 0.08 mm and desiccator, the carbon dioxide accumulated to a dangerous level and the persimmon showed physiological damage in a longer storage period. 3. The advance of after-ripening and deterioration of persimmon sealed in the polyethylene bags was slower than that in open bags when moved out to room temperature from the chilling and the polyethylene bags of 0.06 mm retarded the after-ripening most effectively. 4. On the basis of these results, a temperature of $0^{\circ}C$, relative humidity of almost $85{\sim}100%$ and combinations of 5 % oxygen and $5{\sim}8%$ carbon dioxide seem to be the optimum condition for the storage of persimmon (Teabong-Si). The most successful method of storing was to pack them in polyethylene bags of 0.06 mm and then to store them at $0^{\circ}C$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2018

Purpose: The purpose of this study is to investigate the effect of the titanium implant soaked in saline after RBM and acid etched surface treatment on the initial osseointegration by comparing the removal torque and the surface analysis compared to the titanium implant with only RBM and acid etched surface treatment. Materials and Methods: The control group was RBM and acid etched surface treated implants (RBM + HCl), and the test group was implants soaked in saline for 2 weeks after RBM and acid etched surface treatment (RBM + HCl + Sal). The control and test group implants were placed in the left and right tibiae of 10 rabbits, respectively, and at the same time, the insertion torque (ITQ) was measured. After 10 days, the removal torque (RTQ) was measured by exposing the implant site. FE-SEM, EDS, Surface roughness and Raman spectroscopy were performed for the surface analysis of the new implant specimens used in the experiments. Results: There was significant difference in insertion torque and removal torque between control group and experimental group (P = 0.014 < 0.05). Surface roughness of experimental group is higher than control group. Conclusion: Saline soaking after RBM and acid etched surface treatment of titanium implants were positively affect the initial osseointegration as compared to titanium implants with only RBM and acid etched surface treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.328-334
• /
• 2019

Purpose: The aim of this study was to confirm if Laser-treated implants were soaked in 0.9% NaCl solution for 2 weeks could increase the surface hydrophilicity, and the Remoal Torque of each implant that inserted in rabbit tibia for initial healing period of 10 days. Materials and methods: Twenty machined titanium surface screws were produced with a diameter 3 mm, length 8 mm. Ten screws had their surface treated with a laser only (laser treated group), and the other 10 were soaked in saline for 2 weeks after surface treatment with a laser (laser treated + saline soaked group). Implants were inserted in rabbit tibia (ten adult New Zealand white rabbits), and the RTQ of each implant was measured after 10 days. The wettability among implants was compared by measuring the contact angle. Surface composition and surface topography were analyzed. Results: After 10 days, the laser treat + soaking group implants had a significantly higher mean RTQ than the laser treated implants (P = .002, < .05). There were no significant morphological differences between groups, and no remarkable differences were found between the two groups in the SEM analysis. Conclusion: Saline soaking implants is expected to produce excellent RTQ and surface analysis results.