• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.677-684
• /
• 2016

In order to improve the nighttime visibility of the lane, the need for the development of the automated line marking equipment is on the rise. The purpose of this study is to suggest performance assessment methodology that can be assessed from various aspects such as productivity, safety and quality performance of line marking equipment and to comprehensively analyze the performance of hand-operated and automated equipment based on field test. The following shows the results. It suggested a methodology capable of analyzing the performance of the line marking equipment in terms of productivity, safety and quality. Automated equipment for line marking was analyzed that can be obtained productivity achievement rate of 156.3% as compared with hand-operated equipment. On the basis of the expert advise and literature review, we derived twelve safety factors and ten quality factors of unit work in line marking. By utilizing the AHP technique, we estimated the importance of safety and quality factors. Automated equipment for line marking was analyzed to have been able to expect safety improvement rate of 49.8% and quality improvement rate of 47.2%. It is expected that the performance assessment methodology suggested in this study will be useful in analyzing objective and quantitative validity and expected effectiveness of the line marking equipment.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.7-18
• /
• 2003

Due to the changes of shipping and logistic environment, Asian ports today face severe competition. To be a mega-hub port, Asian ports have achieved a big scale development. For these reasons, it has been widely recognized as an important study to analyze and evaluate characteristics of Asian ports, from the standpoint of Korea where Busan Port is located. Although some previous studies have been reported, most of them have been beyond the scope of Asian ports and analyzed the world's major ports; moreover, the studied ports have been about the ports which are well known from the previous research and reports. So, most studies is unlikely to be used as substantial indicators from the perspective of Busan Port. In addition. most of the existing studies have used hierarchical evaluation algorithm for port ranking, such as AHP (analytical hierarchy process) and clustering analysis. However, these two methods have fundamental weaknesses from the algorithm perspective. The aim of this study is to classify major Asian ports based on competitiveness level. Especially. in order to overcome serious problem of the existing studies, major Asian ports were analyzed by using objective indicators. and Fuzzy C-Means algorithm, which alleviates the weakness of the clustering method. It was found that 10 ports of 16 major Asian ports have their own phases and were classified into 4 port groups. This result implies that some ports have higher potential as ports to lead some zones in Asia. Based on those results. present status and future direction of Busan port were discussed as well.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.362-373
• /
• 2021

This study sought to explore the enhancement of the introduction of teaching and learning methods for Problem Based Learning (PBL) and the evaluation factors to evaluate them effectively through an understanding lecture in Cultural Content Planning. It was intended to incorporate a practical zero-volume education methodology of problem-oriented learning and sufficient leading learning to reflect storytelling in the entire process of completing a cultural content with culture, cultural content, and content planning. To this end, the role of teaching methods should be faithful to ensure that teamwork and cooperation can be done organically according to the educational field, practice and situation. Students who take classes were asked to meet demand, reflect it through surveys, apply real-world problems, and acquire the entire course. Learners had to cooperate with each other until planning cultural content and completing the results through classes, and they evaluated themselves and colleagues in teamwork until the last result was completed from creative ideas. The results were shared together and the students were able to investigate the necessary PBL evaluation factors for themselves, and the prior research and survey on the method of PBL evaluation was conducted to derive the factors of understanding of cultural content planning. The derived assessment elements were able to identify priorities between the assessment elements using basic statistics, word cloud analysis, and AHP analysis. The components of the assessment derived were communication skills, basic knowledge, reasoning process, expertise, and evaluation techniques. Through this article, I was able to lead the understanding of cultural content planning to problem-oriented learning classes and encourage students to be familiar and smooth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.671-678
• /
• 2021

In a previous study, technology protection levels were set on a qualitative basis. That study lacked quantitative standards, so here, we conduct a study to complement the previous study and to present an objective standard. This paper provides a method of setting a technical protection level that applies statistical analysis. To set the technology protection level, statistical analysis of six technical survey items is performed first. Second, the technical survey items are analyzed by AHP to quantify the opinions of experts in order to derive weights for each technical survey item. Finally, by using the normal distribution scatter map and median calculation method, the technology protection level is selected in three stages using the final detailed factor technology score reflecting the weight. The technology protection level methodology developed through this study is the first methodology with objectivity that can evaluate defense technology by level. If this methodology is applied in practice, it is believed that it will provide a scientific and quantitative technology value judgment criterion when setting the technology protection level in the future.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.34-46
• /
• 2021

In the domestic data exchanging market, unreasonable pricing of purchase data is consistently mentioned as a major obstacle in data trading. This is a problem caused by the inability to properly evaluate the value of data products due to lack of product information and experience in using them. In order to activate trading, the data exchanges need to provide information that allows consumers to comprehensively judge the value of data products in addition to prices. The cost-based, income-based, and market-based methods, which are mainly applied to data valuation, are insufficient as data valuation methods to stimulate trading and distribution because only price information, a result of valuation from a supplier's point of view, can be shared with consumers. This study aims to develop a measurable valuation method that allows data trading stakeholders (exchanges, suppliers, and consumers) to judge and share the value of data products from a common perspective. To this end, we identified the value drivers of data products, which are considered important in overseas data exchanges and related research, and derived an evaluation method that can quantitatively measure each value driver. In addition, evaluation criteria in the form of a rating table were developed using data products for transactions, and a value evaluation index was developed through stratification analysis (AHP) to enable relative value comparison. As a result of applying the evaluation criteria to actual data products, it was found that the evaluation values were differentiated according to the characteristics of individual data products, so it could be used as a relative value comparison tool.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.2
• /
• pp.65-74
• /
• 2009

It is expected that the number of apartment complexes in Korea that are over 20 years old will rapidly increase to more than 3,500,000. Consequently, the remodeling of these buildings is being revitalized throughout the country. Among the requirements for such remodeling, the expansion of parking lots has considerable weight. When enlarging a parking lot, the access route from an underground floor to the main building (i.e., the means of entry into the main building) determines the possibility of vertical enlargement for elevators, the size of the parking lot, the construction period, and construction expenses, etc. When enlarging an underground parking lot of an apartment complex, the access between the main building and the parking lot, as well as the inhabitants' requirements for entering the main building, are generally determined based on the designer's experience, rather than on the exact estimation of the peculiarity of the complex. In order to resolve such a problem, when enlarging an underground parking lot, a systematic and rational method is needed for selecting the means of entry into the main building. In this study, a selection model is derived for the method of selecting an access route into the main building when constructing an underground parking lot, in order to provide a reasonable decision-making process. A research method was investigated for determining the access route into the main building when enlarging a parking lot. On the basis of research carried out through in-depth interviews with experts, the characteristics for each means of entry into the main building were analyzed and the factors affecting the selection of the access route were deduced. The affecting factors selected were construction efficiency, convenience efficiency and economic efficiency. Weight values were then estimated for the selected affecting factors by applying the AHP method. Results showed that convenience efficiency, which gained the highest value, is the most important factor in selecting the means of entry into the main building. The most suitable means of entry into the main building was also suggested after estimating the applicability of the site by selecting complexes with remodeling possibility. This study will be applied as a reference for selecting the means of entry into the main building when constructing an underground parking lot particularly for older apartment complexes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.211-222
• /
• 2004

Lately construction industry tends to prefer remodeling of existing buildings rather than new construction or reconstruction of buildings due to strengthening of several restriction related to real estates along with prolonged depression. And also, remodeling of building costs less and creates less wastes compared to reconstruction and so it is more profitable in financial and environmental view. However remodeling is process of creating new environment with existing building. Therefor remodeling must follow the procedure realizing problem and fix the problem based on through investigation on existing building and users requirement must be faithfully reflected. Specially in case of apartment houses, since vagueness on ownership and management authority on common parts exists. Hereupon, in this study we are to present the procedure of analyzing apartment house remodeling method through user requirement by approaching to several considerable factors in user request side.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.4
• /
• pp.803-816
• /
• 1997

In this paper we propose a new approach far part families considering multiple attributes of parts in the design and operating stage of flexible manufacturing systems. We first represent the relationship of parts and the relative attributes using fuzzy membership function, AHP method and normalization. As a result, more realistic nonbinary data of the relationship is obtained. Then we group parts into part families based on the nonbinary data using fuzzy $\alpha$-cut and new similarity coefficient method. The performance of our method is compared numerically with others.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.91-100
• /
• 2017

Movements using aircraft are continuously increasing. This is because options for airlines, including eight national airlines, are becoming more diverse. In particular, FSC and LCC provide different services and prices, so it is not easy to choose, but it is analyzed that safety is the most important factor when selecting airlines in 2013 and 2017(all age groups are the same). There was a difference between 2013 and 2017 for each age group. In particular, the importance of price factors is high in 2017 compared to 2013, and other items in the 40s and 50s are also significantly changed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1486-1490
• /
• 2005

지속가능한 수자원 개발 및 관리를 위해서는 유역 내에서 진행되고 있는 수자원에 관련된 활동들이 지속가능한 개발의 개념에 부합하는지 여부를 판단해야 한다. 이를 위해서는 국가, 유역, 지자체 등의 수문, 수질, 사회, 경제, 환경적인 요인들을 고려한 다변수 평가 지수가 필요하다. 본 연구에서는 유역의 수자원을 평가할 수 있는 지표들을 선정하고 이들 간의 중요도는 계층적 분석기법(Analytic Hierarchy Process, AHP)을 사용하여 산정하였으며 이들을 종합한 수자원 지속가능성 지수(WRSI, Water Resources Sustainability Index)를 개발하였다. WRSI는 경제적 효율성 세부지수, 사회적 공평성 세부지수, 환경 보전성 세부지수, 유지관리능력 세부지수로 구성하였다. 지표들과 세부지수들 간의 중요도는 전문가들에 대한 설문조사를 통하여 산정하였다. 개발된 WRSI 구성지표들의 표준화는 이들의 적정 확률분포를 선정한 후 누가확률을 사용하여 산정하는 방법을 개발하여 사용하였다.