Browse > Article
http://dx.doi.org/10.12652/Ksce.2016.36.4.0677

Performance Evaluation of the Small Automatic Line Marking Equipment  

Lee, Yongmun (Pyunghwa Engineering Consultants LTD.)
Kim, Sangtae (Pyunghwa Engineering Consultants LTD.)
Kim, Heungrae (Pyunghwa Engineering Consultants LTD.)
Choi, Keechoo (Ajou University)
Publication Information
KSCE Journal of Civil and Environmental Engineering Research / v.36, no.4, 2016 , pp. 677-684 More about this Journal
Abstract
In order to improve the nighttime visibility of the lane, the need for the development of the automated line marking equipment is on the rise. The purpose of this study is to suggest performance assessment methodology that can be assessed from various aspects such as productivity, safety and quality performance of line marking equipment and to comprehensively analyze the performance of hand-operated and automated equipment based on field test. The following shows the results. It suggested a methodology capable of analyzing the performance of the line marking equipment in terms of productivity, safety and quality. Automated equipment for line marking was analyzed that can be obtained productivity achievement rate of 156.3% as compared with hand-operated equipment. On the basis of the expert advise and literature review, we derived twelve safety factors and ten quality factors of unit work in line marking. By utilizing the AHP technique, we estimated the importance of safety and quality factors. Automated equipment for line marking was analyzed to have been able to expect safety improvement rate of 49.8% and quality improvement rate of 47.2%. It is expected that the performance assessment methodology suggested in this study will be useful in analyzing objective and quantitative validity and expected effectiveness of the line marking equipment.
Keywords
Performance assessment; Line marking equipment; Productivity; Safety; Quality;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Han, J. G., Kim, K. T. and Kwon, S. W. (2006). "Performance evaluation of road stripe removing equipment using high pressure Water-Jet." Korea Journal of construction Engineering and Management, Vol. 7, No. 6, pp. 79-89.
2 Korean National Police Agency (2012). Traffic Signal Setting & Management Manual (in Korean).
3 Lee, J. H. and Kim, Y. S. (2008). "Development of the performance analysis model based on research and development phases for automated construction equipment." Korea Journal of construction Engineering and Management, Vol. 9, No. 2, pp. 67-80.
4 Lee, J. H., Kim, Y. S., Lee, J. B. and Jeong, M. H. (2006). "Development of an automated pavement crack sealing machine and its economic feasibility analysis." Korea Journal of construction Engineering and Management, Vol. 7, No. 6, pp. 151-164.
5 Lim, Y. S., Song, H. Y., Jeong, H. K., Jeong, M. C. and Kong, J. S. (2011). "A development of quantitative analysis model for the policy analysis in feasibility study using the performance assessment method." Korea Journal of construction Engineering and Management, Vol. 12, No. 2, pp. 89-100.   DOI
6 Park, C. H. (2010). A Study on the Improvement of Construction Work Efficiency by Work Sampling Technique, Master of Science in Civil & Environmental Engineering, Hanyang University.
7 Ryu, Y. T., Park, S. J., Lee, J. H., Jeong, M. H. and Kim, Y. S. (2004). "Development of the evaluation model for performance analysis of a tele-operated hume concrete pipe laying machine." Korea Journal of construction Engineering and Management, Vol. 5, No. 1, pp. 157-167.