• Journal of Forest and Environmental Science
• /
• v.38 no.2
• /
• pp.122-127
• /
• 2022

Agroforestry in terms of intercropping cow pea as summer forage with Grewia tenax was undertaken under sub -irrigation system in two consecutive seasons of 2017 and 2018 in saline soil of Khartoum State of Sudan. The aims were to find out suitable agro forestry system for saline soils as well as to investigate effect of tree spacing on field summer forage crop under semi -irrigation system. Therefore G. tenax trees that spaced at 4×4 m were used as main factor versus cow pea crop that incorporated at 25×50 cm intervals by using completely randomized block design with 3 replications. Trees and crop parameters were determined in terms of plant growth and yield. In addition to land equivalent ratio and soil chemical and physical properties at different layers were determined. The results revealed that, soil parameters in terms of CaCo₃, SAR, ESP, pH paste and EC ds/m were increased with increasing soil depths. Meanwhile tree growth did not show any significant differences in the first season in 2017. Whereas in the second season in 2018 tree growth namely; tree height, tree collar and canopy diameters were higher under intercropping than in sole trees. Cow pea plant height recorded significant differences under sole crop in the first season in 2017. Unlike the forage fresh yield that was significant under the inter cropped plots. Tree fruit yield was higher under sole trees and land equivalent ratio was more advantageous under GS2 (1.5 m) which amounted to 4. Therefore it is possible to introduce this agroforestry system under saline soils to provide summer forage of highly nutritive value to feed animals and to increase farmers' income as far as to halt desertification and to sequester carbon.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.4
• /
• pp.327-339
• /
• 2020

Transpiration is the movement of water into the atmosphere through leaf stomata of plant, and it accounts for more than half of evapotranspiration from the land surface. The measurements of transpiration could be conducted in various ways including eddy covariance and water balance method etc. However, the transpiration measurements of individual trees are necessary to quantify and compare the water use of each species and individual component within stands. For the measurement of the transpiration by individual tree, the thermometric methods such as heat dissipation and heat pulse methods are widely used. However, it is difficult and labor consuming to maintain the transpiration measurements of individual trees in a wide range area and especially for long-term experiment. Therefore, the sharing of sapflow data through database should be useful to promote the studies on transpiration and water balance for large spatial scale. In this paper, we present sap flow database, which have Granier type sap flux data from 18 Korean pine (Pinus koraiensis) since 2011 and 16 (Quercus aliena) since 2013 in Mt.Taehwa Seoul National University forest and 18 needle fir (Abies holophylla), seven (Quercus serrata), three (Carpinus laxiflora and C. cordata each since 2013 in Gwangneung. In addition, the database includes the sapling transpiration of nine species (Prunus sargentii, Larix kaempferii, Quercus accutisima, Pinus densiflora, Fraxinus rhynchophylla, Chamecypans obtuse, P. koraiensis, Betulla platyphylla, A. holophylla, Pinus thunbergii), which were measured using heat pulse method since 2018. We believe this is the first database to share the sapflux data in Rep. of Korea, and we wish our database to be used by other researchers and contribute a variety of researches in this field.

• Korean Journal of Remote Sensing
• /
• v.38 no.3
• /
• pp.311-326
• /
• 2022

The Compact Advanced Satellite 500-4 (CAS500-4) is under development to efficiently manage and monitor forests in Korea and is scheduled to launch in 2025. The National Institute of Forest Science is developing 36 types of forestry applications to utilize the CAS500-4 efficiently. The products derived using the remote sensing method require validation with ground reference data, and the quality monitoring results for the products must be continuously reported. Due to it being the first time developing the national forestry satellite, there is no official calibration and validation site for forestry products in Korea. Accordingly, the author designed a calibration and validation site for the forestry products following international standards. In addition, to install calibration and validation sites nationwide, the authors selected appropriate sensors and evaluated the applicability of the sensors. As a result, the difference between the ground observation data and the Sentinel-2 image was observed to be within ±5%, confirming that the sensor could be used for nationwide expansion.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.1
• /
• pp.122-129
• /
• 2017

Termites are destructive to agriculture, forestry, and buildings, but they can also promote agro-ecosystem balance through the degradation of lignocellulose. Termite-triggered cellulose digestion may be clarified through microbial metabolism of cellulose products. In the present study, we characterized the activities of cellulase and its three components synthesized by the cellulase-producing fungal strain HDZK-BYTF620 isolated from the gut of Odontotermes formosanus. The protein components of cellulases were synthesized by strain HDZK-BYTF620, which were isolated and characterized using polyacrylamide gel electrophoresis, and the expression of the cellulases was studied at the proteome level.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.52-58
• /
• 2006

Coffee chaff for manufacturing of the 6 mm thick cement-bonded boards was obtained from a coffee processing industry at Omuo-Ekiti, in Ekiti State, Nigeria. Boards were produced with three levels of cement to coffee chaff ratio of 1.5:1, 2.5:1 and 3.5:1; and at three levels of mixing curing reagent of 2.0%, 2.5% and 3.0%. Three dimensional properties of thickness swelling (TS), water absorption (WA) and linear expansion (LE) were investigated after 48 hours immersion in water. The mean values obtained for TS, WA and LE ranged from 0.46% to 1.47%, from 11.52% to 24.00%, from 0.19% to 0.35%, respectively. The most dimensionally stable boards were produced at the highest mixing levels of curing reagent and cement to coffee chaff ratio of 3.0% and 3.5:1, respectively. The coffee chaff is suitable as raw material for the manufacture of cement-bonded composites and it would be able to stimulate and activate the use of other agro-byproducts for the manufacture of value-added panels.

• Journal of Climate Change Research
• /
• v.9 no.3
• /
• pp.283-291
• /
• 2018

The purpose of this study is to analyze the effects of useof weather and climate information on farmer income. To accomplish the objective of the study a farm survey was conducted, whose target respondents were local correspondents and reporters of the Korea Rural Economic Institute. The ordered logit model was employed for empirical analysis on determining whether use of weather and climate information affects farmer income. The analysis results show that the greater is farmer use of short-range weather forecasts, the higher is the income. The results also show higher farmers income with use of short-range special weather forecasts. Based upon the empirical results, the dissemination of more precise weather and climate information is suggested to increase farmer income.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.415-423
• /
• 2021

Recently, an R-based point time series data validation system has been established for the statistical post processing and improvement of the National Center for AgroMeteorology-Land Atmosphere Modeling Package (NCAM-LAMP) medium-range prediction data. The time series verification system was used to compare the NCAM-LAMP with the AWS observations and GDAPS medium-range prediction model data operated by Korea Meteorological Administration. For this comparison, the model latitude and longitude data closest to the observation station were extracted and a total of nine points were selected. For each point, the characteristics of the model prediction error were obtained by comparing the daily average of the previous prediction data of air temperature, wind speed, and hourly precipitation, and then we tried to improve the next prediction data using Support Vector Machine( SVM) method. For three months from August to October 2017, the SVM method was used to calibrate the predicted time series data for each run. It was found that The SVM-based correction was promising and encouraging for wind speed and precipitation variables than for temperature variable. The correction effect was small in August but considerably increased in September and October. These results indicate that the SVM method can contribute to mitigate the gradual degradation of medium-range predictability as the model boundary data flows into the model interior.

• Korean Journal of Environment and Ecology
• /
• v.34 no.5
• /
• pp.483-490
• /
• 2020

This study aims to construct an ecological community and lay the foundation for sustainable development in the Korean Peninsula by promoting cooperation between the South and North Korea in the non-political and no-military natural environment sector under the rapidly changing inter-Korean relations. It analyzed South Korea's aid and international cooperation projects in natural environmental sectors in North Korea and examined North Korea's national plan and the cooperation projects that North Korea proposed to the international community to identify potential cooperation projects. It selected 15 potential cooperation projects and 6 crucial factors to be considered in prioritizing the projects through case studies and the first expert survey (five persons). The six crucial factors were i) urgency, ⅱ) linkage between North and South Korea (ecological community in the Korean Peninsula), ⅲ) contribution to sustainable development (prosperity), i) North Korea's acceptability, ⅴ) cooperation conditions and budget, and ⅵ) project sustainability. The second expert survey (14 persons) focused on prioritizing the 15 potential inter-Korean cooperation projects in line with six crucial factors. The 15 potential inter-Korean cooperation projects in the natural environment were comprehensively reviewed and scored based on the six crucial factors. The resulting priority projects were identified as follow: i) Mt. Seorak - Mt. Keumgang International Peace Park, ⅱ) support and cooperation for agro-forestry, ⅲ) joint conservation projects for internationally important migratory birds (such as Black-faced Spoonbills and Cranes), iv) inter-Korean ecotourism linkage and promotion, and ⅴ) establishment of integrated information system on leading ecosystems and biodiversity in the Korean Peninsula. The priority cooperation projects presented in this study are based on the perception of experts engaged in inter-Korean natural environmental cooperation in consideration of existing cooperation cases and conditions. For the actual implementation of these potential projects, a systematic approach, including the formation of consensus between North and South Koreas and the creation of a cooperative network with suitable partners suitable for each project's characteristics, would be needed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.4
• /
• pp.358-383
• /
• 2015

The concept of 'carbon footprint' has been developed as a means of quantifying the specific emissions of the greenhouse gases (GHGs) that cause global warming. Although there are still neither clear definitions of the term nor rules for units or the scope of its estimation, it is broadly accepted that the carbon footprint is the total amount of GHGs, expressed as $CO_2$ equivalents, emitted into the atmosphere directly or indirectly at all processes of the production by an individual or organization. According to the ISO/TS 14067, the carbon footprint of a product is calculated by multiplying the units of activity of processes that emit GHGs by emission factor of the processes, and by summing them up. Based on this, 'carbon labelling' system has been implemented in various ways over the world to provide consumers the opportunities of comparison and choice, and to encourage voluntary activities of producers to reduce GHG emissions. In the agricultural sector, as a judgment basis to help purchaser with ethical consumption, 'low-carbon agricultural and livestock products certification' system is expected to have more utilization value. In this process, the 'cradle to gate' approach (which excludes stages for usage and disposal) is mainly used to set the boundaries of the life cycle assessment for agricultural products. The estimation of carbon footprint for the entire agricultural and forestry sector should take both removals and emissions into account in the "National Greenhouse Gas Inventory Report". The carbon accumulation in the biomass of perennial trees in cropland should be considered also to reduce the total GHG emissions. In order to accomplish this, tower-based flux measurements can be used, which provide a direct quantification of $CO_2$ exchange during the entire life cycle. Carbon footprint information can be combined with other indicators to develop more holistic assessment indicators for sustainable agricultural and forestry ecosystems.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.268-279
• /
• 2021

The geospatial schemes based on topo-climatology have been developed to produce digital climate maps at a site-specific scale. Their development processes are reviewed here to derive the needs for new schemes in the future. Agricultural and forestry villages in Korea are characterized by complexity and diversity in topography, which results in considerably large spatial variations in weather and climate over a small area. Hence, the data collected at a mesoscale through the Automated Synoptic Observing System (ASOS) operated by the Korea Meteorological Administration (KMA) are of limited use. The geospatial schemes have been developed to estimate climate conditions at a local scale, e.g., 30 m, lowering the barriers to deal with the processes associated with production in agricultural and forestry industries. Rapid enhancement of computing technologies allows for near real-time production of climate information at a high-resolution even in small catchment areas and the application to future climate change scenarios. Recent establishment of the early warning service for agricultural weather disasters can provide growth progress and disaster forecasts for cultivated crops on a farm basis. The early warning system is being expanded worldwide, requiring further advancement in geospatial schemes and digital climate mapping.