• Journal of Communications and Networks
• /
• v.13 no.3
• /
• pp.250-256
• /
• 2011

A two-way relaying (TWR) system is analyzed, where two source terminals with unequal numbers of antennas exchange data via an amplify-and-forward relay terminal with a single antenna. In the system considered herein, the link quality between the sources and relay can generally be asymmetric due to the nonidentical antenna configuration, power allocation, and relay location. In such a general setup, accurate bounds on the average sum rate (ASR) are derived when beamforming or orthogonal space time block coding is employed at the sources. We show that the proposed bounds are almost indistinguishable from the exact ASR under various system configurations. It is also observed that the ASR performance of the TWR system with unequal numbers of source antennas is more sensitive to the relay location than to the power allocation.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.625-634
• /
• 2014

This paper studies a dual-hop multiple-access relay network where two independent source nodes transmit information to a common destination node with the aid of multiple single-antenna amplify-and-forward relays. Each relay node is subject to an individual power constraint. We focus on the design of distributed beamforming schemes for the relays to support the transmission rate requirements of the two sources. To this end, we first characterize the achievable rate region for this network via solving a sequence of corner point optimization problems proposed in this paper. We also develop several low-complexity suboptimal schemes in closed form. Two inner bounds of the achievable rate region are theoretically shown to be approximately optimal in two special scenarios. Finally, numerical results demonstrate the effectiveness of our proposed approaches.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3431-3445
• /
• 2017

Due to the advantages of low transmit power consumption, high spectral efficiency and extended system coverage, Device-to-Device (D2D) communication has drawn explosive attention in wireless communication field. Considering that intra-cell interference caused between cellular signals and D2D signals, in this paper, a network coding-based D2D relay cooperative transmission algorithm is proposed. Under D2D single-hop relay transmission mode, cellular interfering signals can be regarded as useful signals to code with D2D signals at D2D relay node. Using cellular interfering signals and network coded signals, D2D receiver restores the D2D signals to achieve the effect of interference suppression. Theoretical analysis shows that, compared with Amplify-and-forward (AF) mode and Decode-and-forward (DF) mode, the proposed algorithm can dramatically increase the link achievable rate. Furthermore, simulation experiment verifies that by employing the proposed algorithm, the interference signals in D2D communication can be eliminated effectively, and meanwhile the symbol error rate (SER) performance can be improved.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.433-444
• /
• 2009

The bi-directional relay channel is the natural extension of a three-terminal relay channel where node a transmits to node b with the help of a relay r to allow for two-way communication between nodes a and b. That is, in a bi-directional relay channel, a and b wish to exchange independent messages over a shared channel with the help of a relay r. The rates at which this communication may reliably take place depend on the assumptions made on the relay processing abilities. We overview information theoretic limits of the bi-directional relay channel under a variety of conditions, before focusing on half-duplex nodes in which communication takes place in a number of temporal phases (resulting in protocols), and nodes may forward messages in four manners. The relay-forwarding considered are: Amplify and forward (AF), decode and forward (DF), compress and forward (CF), and mixed forward. The last scheme is a combination of CF in one direction and DF in the other. We derive inner and outer bounds to the capacity region of the bi-directional relay channel for three temporal protocols under these four relaying schemes. The first protocol is a two phase protocol where a and b simultaneously transmit during the first phase and the relay r alone transmits during the second. The second protocol considers sequential transmissions from a and b followed by a transmission from the relay while the third protocol is a hybrid of the first two protocols and has four phases. We provide a comprehensive treatment of protocols in Gaussian noise, obtaining their respective achievable rate regions, outer bounds, and their relative performance under different SNR and relay geometries.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.2831-2847
• /
• 2017

In this paper, a joint destination-relay selection and antenna mode selection scheme for full-duplex (FD) relay network is investigated, which consists of one source node, N FD amplify-and-forward (AF) relays and M destination nodes. Multiple antennas are configured at the source node, and beamforming technique is adopted. Two antennas are employed at each relay, one for receiving and the other for transmitting. Only one antenna is equipped at each destination node. In the proposed scheme, the best destination node is firstly selected according to the direct links between the source node and destination nodes. Then the transmit and receive mode of two antennas at each relay is adaptively selected based on the relaying link condition. Meanwhile, the best relay with the optimal Tx/Rx antenna configuration is selected to forward the signals. To characterize the performance of the proposed scheme, the closed-form expression of the outage probability is derived; meanwhile, the simple asymptotic expressions are also obtained. Our analysis shows that the proposed scheme obtains the benefits of multi-relay diversity and multi-destination diversity. Moreover, extra space diversity in the medium SNR region can be achieved due to the antenna selection at the relay. Finally, Monte-Carlo simulations are provided to consolidate the analytical results, and show the effectiveness of the proposed scheme.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4326-4341
• /
• 2016

In this paper, an adjustable multiple relay selection (MRS) scheme for cooperative communication with amplify-and-forward (AF) relay under frequency selective channels is proposed. In the proposed scheme, the relays are ordered firstly by the steady-state mean square error (MSE), then the relays are sequentially selected out from N relays and the number of cooperating relays is adjusted dynamically according to the steady-state mean square joint error (MSJE). The aim of this work is to dynamically estimate the optimum number N_o of cooperating relays. Optimum means the minimum number of cooperating relays, N_o, achieving the minimum level of steady-state MSJE. Numerical results verify the analyses and show that the scheme can adaptively adjust the number of cooperating relays, and outperform conventional relay selection schemes. Hence, the proposed scheme provides better tradeoff between BER performance and spectral efficiency and to save more energy in cooperative wireless networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.9
• /
• pp.4180-4196
• /
• 2017

In this paper, we analyze average capacity of an amplify-and-forward (AF) cooperative communication system model in multi-relay multiuser networks. In contrast to conventional cooperative networks, relays in the considered network have no embedded energy supply. They need to rely on the energy harvested from the signals broadcasted by the source for their cooperative information transmission. Based on this structure, a two-step selection scheme is proposed considering both channel state information (CSI) and battery status of relays. Assuming each relay has infinite or finite energy storage for accumulating the energy, we use the infinite or finite Markov chain to capture the evolution of relay batteries and certain simplified assumptions to reduce computational complexity of the Markov chain analysis. The approximate closed-form expressions for the average capacity of the proposed scheme are derived. All theoretical results are validated by numerical simulations. The impacts of the system parameters, such as relay or user number, energy harvesting threshold and battery size, on the capacity performance are extensively investigated. Results show that although the performance of our scheme is inferior to the optimal joint selection scheme, it is still a practical scheme because its complexity is much lower than that of the optimal scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.327-337
• /
• 2012

There have been lots of researches on the optimal relay selection in relay-based systems. However, most researches have been focused on the maximization of transmission capacity with a constraint of sum power at both transmitter and relays. In Ad-hoc networks where relays have batteries of limited power, it is imperative to minimize the energy consumption while maintaining the required quality-of-service (QoS). In this paper, we propose an optimal relay selection strategy to minimize the relay power consumption while satisfying the required signal-to-noise ratio (SNR). Through intensive simulations, we show the proposed method is more effective in terms of energy consumption and guarantee lower transmission failure probability in multi-hop Ad-hoc environments.

• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.493-498
• /
• 2018

In this paper, we provide the performance analyses of a dual-hop amplify-and-forward(AF) relay transmission composed of asymmetric radio-frequence(RF) and free-space optical(FSO) links. In the mixed RF/FSO system, a relay is equipped with two receive antennas for RF signals and one additional transmit antenna for FSO signals. In order to improve a performance of RF link, a switch-and-stay (SSC) diversity technique is applied at the relay which can provide a proper link performance with a low complexity. Specifically, we offer the performance analyses of the proposed system in terms of outage probability and secrecy outage probability. In numerical examples, we compare the system performances with no diversity and selection combining systems and verify our analytical results via computer-based Monte-Carlo simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.286-287
• /
• 2019

In this paper, we consider an amplify-and-forward (AF) full duplex (FD) massive-antenna relay (or base station) aiding communication between K single-antenna source and destination pairs whose transmissions are overheard by one single-antenna eavesdropper. Maximum ratio combining (MRC) and maximum ratio transmission (MRT) processing is employed at the relay. The secrecy performance of the system is then derived with both relay and destination being equipped with low resolution analog-to-digital converters (ADCs). The results show the detrimental effect of the eavesdropper's presence on the sum rate of the system.