• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.596-601
• /
• 2011

This paper has presented research results for the switching mode class E frequency multiplier that has simple circuit structure and high efficiency. Frequency multiplication is coming from the nonlinearity of the active component, and this paper models the FET active component as a simple switch and some parasitics to analyze the characteristics. The matching component parameters for the class E frequency doubler have been derived with modeling the FET as a input controlled switch and some parasitics. A circuit simulator, ADS, is used to simulate the output voltage and current waveform and efficiency with the variation of the parasitic values. With 2.9GHz input and 2V bias, the drain efficiency has been decreased from 98% to 28% with changing the parasitic capacitance from 0pF to 1pF at 5.8GHz output, which shows that the parasitic capacitance CP has the most significant effect on the efficiency among the parasitics of FET.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.173-180
• /
• 2001

In this study steel box girders used as main members of a two span continuous steel bridge, are optimally designed by a Load and Resistance Factor Design method(LRFD) using an numerical optimization method. The width, height, web thickness and flange thickness of the main girder are set as design variables, and light weight design is attempted by choosing the cross-sectional area as an object function. We studied the results of steel box girders and compared with those of 1-type girders. The main program is coded with C++ and connected with optimization modul ADS. which is coded with FORTRAN.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.895-902
• /
• 2014

This paper presents a 2-stage CMOS power amplifier for the 1.75 GHz band using a $0.18-{\mu}m$ CMOS process. Using ADS simulation, a power gain of 28 dB and an efficiency of 45 % at an 1dB compression point of 27 dBm were achieved. The implemented CMOS power amplifier delivered an output power of up to 24.8 dBm with a power-added efficiency of 41.3 % and a power gain of 22.9 dB. For a 16-QAM uplink LTE signal, the PA exhibited a power gain of 22.6 dB and an average output power of 23.1 dBm with a PAE of 35.1 % while meeting an ACLR(Adjacent Channel Leakage Ratio) level of -30 dBc.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.109-114
• /
• 2000

The relation between the phase-shift profile fur the intermediate frequencies and the Langmuir adsorption isotherm at the poly-Ir/0.1 M $H_2SO_4$ aqueous electrolyte interface has been studied using ac impedance measurements, i.e., the phase-shift methods. The simplified interfacial equivalent circuit consists of the serial connection of the electrolyte resistance $(R_s)$, the faradaic resistance $(R_F)$, and the equivalent circuit element $(C_P)$ of the adsorption pseudoca-pacitance $(C_\phi)$. The comparison of the change rates of the $\Delta(-\phi)/{\Delta}E\;and\;\Delta{\theta}/{\Delta}E$ are represented. The delayed phase shift $(\phi)$ depends on both the cathode potential (E) and frequency (f), and is given by $\phi=tan^{-1}[1/2{\pi}f(R_s+R_F)C_P]$. The phase-shift profile $(-\phi\;vs.\;E)$ for the intermediate frequency (ca. 1 Hz) can be used as an experimental method to determine the Langmuir adsorption isotherm $(\theta\;vs.\;E)$. The equilibrium constant (K) for H adsorption and the standard free energy $({\Delta}G_{ads})$ of H adsorption at the poly-Ir/0.1 M $H_2SO_4$ electrolyte interface are $2.0\times10^{-4}$ and 21.1kJ/mol, respectively. The H adsorption is attributed to the over-potentially deposited hydrogen (OPD H).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.45-51
• /
• 2009

The propagation characteristics in parallel plate waveguide with dielectric layer having periodic metal strip pattern are investigated. PIN diode ON/OFF states are regarded as the short and open circuit, respectively, in the simulation using CST's MWS. The $11.25^{\circ}$, $22.5^{\circ}$, and $45^{\circ}$ layers which can be used for X-band 4-bit Radant lens phase shifter, are designed. The simulated results for each dielectric layer are $11.28^{\circ}$, $23.2^{\circ}$, and $46.22^{\circ}$, respectively. Also, the equivalent circuit of each layer at the operating band is realized and simulated using Agilent's ADS. The ADS simulated results are compared with the MWS simulated ones. Measured differential phase shills at the center frequency are $9.6^{\circ}$, $22.4^{\circ}$, and $43^{\circ}$, respectively.

• Journal of Electrochemical Science and Technology
• /
• v.6 no.1
• /
• pp.7-15
• /
• 2015

3-(4-Iodophenyl)-2-imino-2,3-dihydrobenzo[d]oxazol-5-yl 4-methylbenzenesulfonate (4-IPhOXTs) was synthesized and its inhibiting action on the corrosion of stainless steel 316L (SS) in sulfuric acid was investigated by means of potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results of the investigation show that this compound has excellent inhibiting properties for SS corrosion in sulfuric acid. Inhibition efficiency increases with increase in the concentration of the inhibitor. The adsorption of 4-IPhOXTs onto the SS surface followed the Langmuir adsorption model with the free energy of adsorption ΔG⁰_ads of −8.45 kJ mol⁻¹ . Quantum chemical calculations were employed to give further insight into the mechanism of inhibition action of 4-IPhOXTs.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.6
• /
• pp.30-35
• /
• 2007

H.264/AVC provides better quality than other algorithms by using a deblocking filter to remove blocking distortion on block boundary of the decoded picture. However, this filtering process includes lots of memory accesses, which cause delay of overall decoding time. In this paper, we propose a data-reuse algorithm to speed up the process for the deblocking filter. To reuse the data, a new filtering order is suggested. By using this order, we reduce the memory access and accelerate the deblocking filter. The modeling of proposed algorithm is compiled under ARM ADS1.2 and simulated with Armulator. The results of the experiment compared with H.264/AVC standard are achieved on average 58.45% and 57.93% performance improvements at execution cycles and memory access cycles, respectively.

• Journal of Environmental Science International
• /
• v.17 no.8
• /
• pp.899-905
• /
• 2008

Quality test for activated carbon(AC) filter used for drinking water purifier is now an obligatory test and the standard material for valid purifying amount in water purifier performance test has been changed from residual chlorine to chloroform according to the notice of Ministry of Environment in 2006. Therefore, this study aimed to compare the ingredients of AC filters by confirming chloroform removal rate of AC filter and conducting 4 adsorption tests (Iodine, methylene blue decolorization, phenol value, ADS value) for AC filters provided by manufacturers. With water pressure of $1kgf/cm^2$, 1,500 liters of prepared inflow went through to check chloroform removal rate. As a result, product with removal rate of below 60% from all products. On the other hand, 4 adsorption tests were conducted for filters in the market and filters from manufacturers. None of the products satisfied all 4 tests. In particular, they showed great shortage to the standard in phenol value and ADS value test. However, manufacturers' filter showed much better performance than filters in the market. Also, the result of valid purifying amount test for each of five products of appropriate product and inappropriate product based on filter quality test showed average 4,440 liters for appropriate product and average 2,620 liters for inappropriate product. According to the result, it is shown that the filter with good adsorption also had good chloroform removal efficiency and adsorption efficiency. Therefore, it is expected that customers can screen good quality product through obligatory conduct of filter quality test. However, it is considered that complementation in system is required for future inspection.

• The Research Journal of the Costume Culture
• /
• v.30 no.4
• /
• pp.548-562
• /
• 2022

We conducted this study to determine the TikTok usage status of Chinese consumers, and the effect of fashion advertisement type preference and TikTok characteristics on fashion product purchase intentions. For this study, we conducted a literature review and survey method. The following conclusions were drawn by collecting data online and performing statistical analysis. Firstly, the period of use was 2 - 4 years, and 95.1% of people used it for 2 - 3 hours a day, and 95.1% of the people had a purchasing experience on TikTok. Secondly, the most people were interested in self creating and editing videos in TikTok. With regards to TikTok content, groups aged 30 are significantly more interested in fashion coordination suggestions and influencer' recommendations than groups aged 20. Thirdly, this study found that the characteristics of TikTok fashion advertisements significantly influenced purchase intention. Among the characteristics of fashion advertisements, this study conclude that the "fashion entertainment" characteristic factor that fashion advertisements are fun and entertaining was the most influential variable on purchase intention, followed by useful information, reliability, and interactivity related to fashion. Fourthly, the types of preferred TikTok fashion advertising had a statistically significant effect on product purchase intention. The influential types of preferred advertising are top view, live advertisement, hashtag challenge, in-feed ads, and sticker ads.

• Journal of Global Scholars of Marketing Science
• /
• v.10
• /
• pp.91-110
• /
• 2002

The purpose of this research is as follows; First, the reference price ads are to investigate how the price cues and prior knowledge of service products have an effect on consumers' perception by the type of information. Second, this study suggests some marketing strategy guides to service marketing managers for price promotion strategy. To achieve these research goals, the hypothesis was established through reviewing the previous studies and the data collected from the experimental design. The experiment of this study was a 2$\times$2$\times$2 among the subject factorial design in which the factors were present in price cue presentation (presentation/non- presentation), the level of prior knowledge(high/low), and the type of information(positive/negative). The major findings of this research can be summarized as follows; First, there are some significant statistical differences in the consumers' perception value by level of price cues(hypothesis 1). Second, there are some significant statistical differences in the consumers' price-quality perception by level of price cues(hypothesis 2). Third, there are some significant statistical differences in the price-quality perception by the level of prior knowledge and the type of information(hypothesis 3).