• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.584-590
• /
• 2003

In this paper, the numerical characteristics of the recently developed Envelope ADI-FDTD are investigated. Through numerical simulations, it is shown that the unconditional stability of the Envelope ADI-FDTD is independent of time step size and we can get better dispersion accuracy than the traditional ADI-FDTD by analyzing the envelope of the signal. This fact gives the opportunity for extending the temporal step size to the Nyquist limit in certain cases. Numerical results show that the Envelope ADI-FDTD can be used as an efficient electromagnetic analysis tool especially in the single frequency or band limited systems.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.550-560
• /
• 2012

Objectives: QSAR methodology was applied to explain two different sets of acceptable daily intake (ADI) data of 74 pesticides proposed by both the USEPA and WHO in terms of setting guidelines for food and drinking water. Methods: A subset of calculated descriptors was selected from Dragon$^{(R)}$ software. QSARs were then developed utilizing a statistical technique, genetic algorithm-multiple linear regression (GA-MLR). The differences in each specific model in the prediction of the ADI of the pesticides were discussed. Results: The stepwise multiple linear regression analysis resulted in a statistically significant QSAR model with five descriptors. Resultant QSAR models were robust, showing good utility across multiple classes of pesticide compounds. The applicability domain was also defined. The proposed models were robust and satisfactory. Conclusions: The QSAR model could be a feasible and effective tool for predicting ADI and for the comparison of logADIEPA to logADIWHO. The statistical results agree with the fact that USEPA focuses on more subtle endpoints than does WHO.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.1
• /
• pp.90-97
• /
• 1989

Austempered ductile cast iron (ADI) which has been recently developed shows good mechanical properties. These properties are related to the microstructure which is greatly affected by processing variables such as austempering time and temperature. In this study, the relationships between mechanical properties from impact test, and hardness test and the results from ultrasonic velocity measurement and electrical resistivity measurement are studied on the ADI samples which are heattreated at different austempering temperature and time. From the results, we conclude the followings. The ultrasonic velocity measurement could be used for the study of austempering reaction mechanism. The electrical resistivity measurement could be used as quality assurance technique for the ADI.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.890-894
• /
• 2006

To make the best use of known characteristics of the alternating-direction-implicit finite-difference time-domain (ADI-FDTD) method such as unconditional stability and modeling accuracy, an efficient time domain solution with variable time-step size is proposed. Numerical experiment shows that a time-step size for a given mesh size can be increased preserving a desired numerical accuracy over frequencies of interest. The proposed method can be used to analyze electromagnetic problems with reduced computation time.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.6
• /
• pp.460-464
• /
• 2015

Objective : Bilateral C1 lateral mass and C2 pedicle screw fixation (C1LM-C2P) is an ideal technique for correcting atlantoaxial instability (AAI). However, the inevitable situation of vertebral artery injury or unfavorable bone structure may necessitate the use of unilateral C1LM-C2P. This study compares the fusion rates of the C1 lateral mass and C2 pedicle screw in the unilateral and bilateral methods. Methods : Over five years, C1LM-C2P was performed in 25 patients with AAI in our institute. Preoperative studies including cervical X-ray, three-dimensional computed tomography (CT), CT angiogram, and magnetic resonance imaging were performed. To evaluate bony fusion, measurements of the atlanto-dental interval (ADI) and CT scans were performed in the preoperative period, immediate postoperative period, and postoperatively at 1, 3, 6, and 12 months. Results : Unilateral C1LM-C2P was performed in 11 patients (44%). The need to perform unilateral C1LM-C2P was due to anomalous course of the vertebral artery in eight patients (73%) and severe degenerative arthritis in three patients (27%). The mean ADI in the bilateral group was 2.09 mm in the immediate postoperative period and 1.75 mm in 12-months postoperatively. The mean ADI in the unilateral group was 1.82 mm in the immediate postoperative period and 1.91 mm in 12-months postoperatively. Comparison of ADI measurements showed no significant differences in either group (p=0.893), and the fusion rate was 100% in both groups. Conclusion : Although bilateral C1LM-C2P is effective for AAI from a biomechanical perspective, unilateral screw fixation is a useful alternative in patients with anatomical variations.

• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.39-44
• /
• 2003

An unconditionally stable compact 2D Alternating-Direction Implicit (ADI) FDTD method for calculating dispersion characteristics of waveguide structures is proposed. The numerical stability and numerical dispersion relation of the proposed method are also presented and discussed. Numerical wavelengths for the dominant and higher order modes in a hollow waveguide are obtained from numerical simulations and compared with those from the analytical dispersion relation. The numerical results show that the proposed scheme has the potential to successfully analyze a class of waveguides having locally fine geometry with reduced numerical costs.

• Journal of electromagnetic engineering and science
• /
• v.9 no.4
• /
• pp.211-217
• /
• 2009

A three-dimensional locally one-dimensional multiresolution time-domain(LOD-MRTD) method is introduced and unconditional stability is proved analytically. The updating formulations have fewer terms on the right-hand side than those of an alternating direction implicit MRTD(ADI-MRTD). The validation of the method is presented using the resonance frequency problem of an empty cavity. The reduction of the numerical dispersion technique is also combined with the proposed method. The numerical examples show that the combined method can improve the accuracy significantly.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.12-16
• /
• 2009

This paper presents a new iterative locally one-dimensional [mite-difference time-domain(LOD-FDTD) method that has a simpler formula than the original iterative LOD-FDTD formula[l]. There are fewer arithmetic operations than in the original LOD-FDTD scheme. This leads to a reduction of CPU time compared to the original LOD-FDTD method while the new method exhibits the same numerical accuracy as the iterative ADI-FDTD scheme. The number of arithmetic operations shows that the efficiency of this method has been improved approximately 20 % over the original iterative LOD-FDTD method.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.26 no.1
• /
• pp.1-14
• /
• 1998

Various numerical methods for the two dimensional shallow water equations have been applied to the problems of flood routing, tidal circulation, storm surges, and atmospheric circulation. These methods are often based on the Alternating Direction Implicity(ADI) method. However, the ADI method results in inaccuracies for large time steps when dealing with a complex geometry or bathymetry. Since this method reduces the performance considerably, a fully implicit method developed by Wilders et al. (1998) is used to improve the accuracy for a large time step. Finite Difference Methods are defined on a rectangular grid. Two drawbacks of this type of grid are that grid refinement is not possibile locally and that the physical boundary is sometimes poorly represented by the numerical model boundary. Because of the second deficiency several purely numerical boundary effects can be involved. A boundary fitted curvilinear coordinate transformation is used to reduce these difficulties. It the curvilinear coordinate transformation is used to reduce these difficulties. If the coordinate transformation is orthogonal then the transformed shallow water equations are similar to the original equations. Therefore, an orthogonal coorinate transformation is used for defining coordinate system. A multigrid (MG) method is widely used to accelerate the convergence in the numerical methods. In this study, a technique using a MG method is proposed to reduce the computing time and to improve the accuracy for the orthogonal to reduce the computing time and to improve the accuracy for the orthogonal grid generation and the solutions of the shallow water equations.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.4
• /
• pp.535-542
• /
• 1995

In this paper we present two preconditioners for solving large sparse linear systems arising from elliptic partial differential equations on massively parallel machines, such as the CM-5. Most massively parallel machines do heavily rely on the message-passing for the interprocessor communications. but according to the current manufacturing standards the cost of communications is very high compared to that of floating point arithmetic computations. Due to this we need an algorithm which minimizes the amount of interprocessor communication on the massively parallel machines. We will show that Block SOR(Successive Over Relaxation) method coupled with the multi-coloring technique is one of such preconditioner on the massively parallel machines, by conducting experiments in the CM-5. Also, we implemented the ADI(Alternation Direction Implicit) method in the CM-5, which has been conventionally one of the most powerful parallel preconditioner. Our experiment shows that Block SOR method coupled with the multi-coloring technique could yield a speedup with 50% efficiency with the range of number of processors form 16 to 512 for a matrix with dimension 512x512. On the other hand, the ADI method shows a very poor performance.