• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.125-136
• /
• 2009

This paper presents a high-speed low-complexity two-bit level pipelined Viterbi decoder architecture for MB-OFDM UWB systems. As the add-compare-select unit (ACSU) is the main bottleneck of the Viterbi decoder, this paper proposes a novel two-bit level pipelined MSB-first ACSU, which is based on 2-step look-ahead techniques to reduce the critical path. The proposed ACSU architecture requires approximately 12% fewer gate counts and 9% faster speed than the conventional MSB-first ACSU. The proposed Viterbi decoder was implemented with $0.18-{\mu}m$ CMOS standard cell technology and a supply voltage of 1.8V. It operates at a clock frequency of 870 MHZ and has a throughput of 1.74 Gb/s.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.240-245
• /
• 2006

Viterbi decoder is composed of BMU(Branch metric Unit), ACSU(Add Compare Select Unit), and SMU(Survivor path Memory Unit). For high speed viterbi decoders, ACSU is the main bottleneck due to the compare-select and feedback operation. Thus, many studies have been advanced to solve the problem. For example, M-step look ahead technique and Minimized method are typical high speed algorithms. In this paper, we designed a bit-level ACSU(K=3, R=1/2, 4bit soft decision) based on those algorithms and switched the matrix product order in the backward direction of Minimized method so as to apply Code-Optimized-Array in order to reduce the area complexity. For experimentation, we synthesized our design by using SYNOPSYS Design compiler, with TSMC 0.18 um library, and verified the timing by using CADENCE verilog-XL.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2006.06a
• /
• pp.311-315
• /
• 2006

Viterbi decoder는 크게 BM(Branch metric), ACS(Add-Compare-Select), SM(Survivor Memory) block 으로 구성되어 있다. 이중 ACSU 부분은 고속 데이터 처리를 위한 bottleneck이 되어 왔으며, 이의 해결을 위한 많은 연구가 활발히 진행되어 왔다. look ahead technique은 ACSU를 M-step으로 처리하고 CS(Carry save) number를 사용한 새로운 비교 알고리즘을 제안하여 high throughput을 추구했으며, minimized method는 block processing 방식으로 forward, backward 방향으로 decoding을 수행하여 ACSU 부분의 feedback을 완전히 제거하여 exteremely high throughput 을 추구하고 있다. 이에 대해 look ahead technique 의 기본 PE(Processing Element)를 바탕으로 minimized method 알고 리즘의 core block 을 bit-level 로 구현하였으며 : code converter 를 이용하여 CS number 가운데 redundat number(l)를 제거하여 비교기를 더 간단히 하였다. SYNOPSYS의 Design compiler 와 TSMC 0.18 um library 를 이용하여 합성하였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.234-237
• /
• 2003

본 논문은 이동 통신 및 IEEE 802.lla WLAN에서 사용하고 있는 컨벌루셔널 부호의 복호기인 비터비 복호기의 SMU(Survivor Metric Unit)의 최적 메모리 제어에 관한 연구이다. 비터비 복호기기 구조는 크게 BMU, ACSU, SMU부로 구성된다. 이때 SMU부는 최적의 경로를 역추적 하여 최종 복호 데이터를 출력해 주는 블록으로, 역추적 길이에 따라 메모리 사용 양과 복호 성능이 좌우된다. 따라서 본 논문에서는 최적 메모리 제어 알고리즘을 제안함으로써 복호 속도의 향상과 메모리 사용 양을 줄이는 방법을 제안한다. 제안 알고리즘의 성능을 검증하기 위해 기존의 비터비 복호기와 역추적 길이에 따른 비터비 복호기의 성능을 실험을 통해 분석함으로써 제안 방법의 객관적인 성능을 분석한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.81-89
• /
• 2007

The Viterbi decoder, which employs the maximum likelihood decoding method, is a critical component in forward error correction for digital communication system. However, lowering power consumption on the Viterbi decoder is a difficult task since the number of paths calculated equals the number of distinctive states of the decoder and the Viterbi decoder utilizes trace-back method. In this paper, we propose a method which minimizes the number of operations performed on the comparator, deployed in the SPEC-T Viterbi decoder implementation. The proposed comparator was applied to the ACSU(Add-Compare-Select Unit) and MPMSU(Minimum Path Metric Search Unit) modules on the decoder. The proposed ACS scheme and MPMS scheme shows reduced power consumption by 10.7% and 11.5% each, compared to the conventional schemes. When compared to the SPEC-T schemes, the proposed ACS and MPMS schemes show 6% and 1.5% less power consumption. In both of the above experiments, the threshold value of 26 was applied.