• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.1-5
• /
• 2016

Field and temperature dependence of the critical current density, Jc, were measured for both un-doped and carbon doped $MgB_2/Nb/Monel$ wires manufactured by Hyper Tech Research, Inc. In particular, carbon incorporation into the $MgB_2$ structure using malic acid additive and a chemical solution method can be advantageous because of the highly uniform mixing between the carbon and boron powders. At 4.2 K and 10 T, Jc was estimated to be $25,000-25,300Acm^{-2}$ for the wire sintered at $600^{\circ}C$ for 4 hours. The irreversibility field, $B_{irr}$, of the malic acid doped wire was approximately 21.0 - 21.8 T, as obtained from a linear extrapolation of the J-B characteristic. Interestingly enough, the Jc of the malic acid doped sample exceeds $10^5Acm^{-2}$ at 6 T and 4.2 K, which is comparable to that of commercial Nb-Ti wires.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.6
• /
• pp.426-433
• /
• 2016

This paper investigates the effects of operating conditions of an air classifier mill (ACM) on the particle sizes of PVC and rice hull. Based on the Box-Behnken matrix, the pulverization experiments were performed considering three operating factors: the air flow rate, the classifier speed and the mill speed. The response surface methodology was applied to identify the effects of the operating factors on the particle size. Results show that the particle sizes are governed by the linear variations of the operating factors. As less air is supplied and the mill rotates more slowly, the powder of both PVC and rice hull becomes finer. Furthermore, the classifier speed has a significant effect on the PVC powder but almost no effect on the rice hull powder. Thus, it is found that strong interactions exist between the material characteristics of a particle and the operating conditions of the ACM.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.11
• /
• pp.504-511
• /
• 2014

The objective of this study is to theoretically analyze the performance of an open wet air-cycle refrigeration system, which nowadays is increasingly generating environmental concern. The temperature and relative humidity of the outside air are selected as the most important parameters. As the temperature and relative humidity of the outside air increase, the pressure ratio of the ACM compressor is determined to be nearly constant, the air temperature at the exit of the system increases, and the amount of condensed water, the cooling capacity, the COP, and the total entropy production rate increase overall. The effects of the effectiveness of the heat exchanger and the efficiency of the turbine on the performance are greater than that of the efficiency of the ACM compressor. Also, the performance of the wet air-cycle refrigeration system with two heat exchangers is enhanced, with a high COP and low total entropy production rate, compared to the system with a single heat exchanger.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.3
• /
• pp.151-155
• /
• 2015

We fabricated the Cu Schottky contact on an n-type Ge wafer and investigated the forward bias current-voltage (I-V) characteristics in the temperature range of 100~300 K. The zero bias barrier height and ideality factor were determined based on the thermionic emission (TE) model. The barrier height increased and the ideality factor decreased with increasing temperature. Such temperature dependence of the barrier height and the ideality factor was associated with spatially inhomogeneous Schottky barriers. A notable deviation from the theoretical Richardson constant (140.0 Acm^-2K^-2 for n-Ge) on the conventional Richardson plot was alleviated by using the modified Richardson plot, which yielded the Richardson constant of 392.5 Acm^-2K^-2. Finally, we applied the theory of space-charge-limitedcurrent (SCLC) transport to the high forward bias region to find the density of localized defect states (N_t), which was determined to be 1.46 × 10¹² eV^-1cm^-3.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1842-1848
• /
• 2009

This paper summarizes a data modeling for developing the baseline network analysis software of the Korean energy management system (EMS). The study is concentrated on the following aspects. First, the data for operating the each application software are extracted. Some of the EMS network application softwares are selected for basis model. Those are based on the logical functions of each software and are not considered the other softwares. Second, the common data are extracted for equipment model and topological structure of power system in Korea. We propose the application common model(ACM) that can be applied whole EMS network application softwares. The ACM model includes the hierarchy and non-hierarchy power system structure, and is connected each other using the direct and indirect link. Proposed database model is tested using the Korea Electric Power Corporation(KEPCO) system. The real time SCADA data are provided for the test. Through the test, we verified that the proposed database structure can be effectively used to accomplish the Korean EMS system.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.6
• /
• pp.293-297
• /
• 2019

Quasi-nano-hardness and corrosion behaviors of neutron-irradiated reactor pressure vessel (RPV) steels such as 15Ch2MFA (Ni<0.4, 2.520 n/㎠ (En>1.0 MeV) for 32 days. Quasi-nano-hardnesses of the 15Ch2MFA and 15Cr2NHFA steels were 183.8 and 179.8 Hv, respectively. Their corrosion rates and corrosion potentials were 2.4×10^-4Acm^-2, -515.9 mV_SHE and 6.8×10^-4 Acm^-2, -523.6 mV_SHE in NACE standard TM0284-96 solution at room temperature, respectively. 15Ch2MFA steel showed better quasi-nano-hardness and corrosion resistance than 15Cr2NHFA steel in this test condition.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.945-961
• /
• 2019

Tongue diagnosis is one of the most important diagnostic methods in Traditional Chinese Medicine (TCM). Tongue image segmentation aims to extract the image object (i.e., tongue body), which plays a key role in the process of manufacturing an automated tongue diagnosis system. It is still challenging, because there exists the personal diversity in tongue appearances such as size, shape, and color. This paper proposes an innovative segmentation method that uses image thresholding, gray projection and active contour model (ACM). Specifically, an initial object region is first extracted by performing image thresholding in HSI (i.e., Hue Saturation Intensity) color space, and subsequent morphological operations. Then, a gray projection technique is used to determine the upper bound of the tongue body root for refining the initial object region. Finally, the contour of the refined object region is smoothed by ACM. Experimental results on a dataset composed of 100 color tongue images showed that the proposed method obtained more accurate segmentation results than other available state-of-the-art methods.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.65-74
• /
• 2022

In natural language processing, commonly used words such as prepositions are referred to as stop-words; they have no inherent meaning and are therefore ignored in indexing and retrieval tasks. The removal of stop-words from Arabic text has a significant impact in terms of reducing the size of a cor- pus text, which leads to an improvement in the effectiveness and performance of Arabic-language processing systems. This study investigated the effectiveness of applying a stop-word lists elimination with normalization as a preprocessing step. The idea was to merge statistical method with the linguistic method to attain the best efficacy, and comparing the effects of this two-pronged approach in reducing corpus size for Ara- bic natural language processing systems. Three stop-word lists were considered: an Arabic Text Lookup Stop-list, Frequency- based Stop-list using Zipf's law, and Combined Stop-list. An experiment was conducted using a selected file from the Arabic Newswire data set. In the experiment, the size of the cor- pus was compared after removing the words contained in each list. The results showed that the best reduction in size was achieved by using the Combined Stop-list with normalization, with a word count reduction of 452930 and a compression rate of 30%.

• Bulletin of the Korean Mathematical Society
• /
• v.59 no.4
• /
• pp.929-949
• /
• 2022

Given an ACM set 𝕏 of points in a multiprojective space ℙ^m×ℙⁿ over a field of characteristic zero, we are interested in studying the Kähler different and the Cayley-Bacharach property for 𝕏. In ℙ¹×ℙ¹, the Cayley-Bacharach property agrees with the complete intersection property and it is characterized by using the Kähler different. However, this result fails to hold in ℙ^m×ℙⁿ for n > 1 or m > 1. In this paper we start an investigation of the Kähler different and its Hilbert function and then prove that 𝕏 is a complete intersection of type (d₁, …, d_m, d'₁, …, d'_n) if and only if it has the Cayley-Bacharach property and the Kähler different is non-zero at a certain degree. We characterize the Cayley-Bacharach property of 𝕏 under certain assumptions.

• Cartoon and Animation Studies
• /
• s.37
• /
• pp.439-461
• /
• 2014

Art has evolved into remarkable changes in its art form maintaining a close link with the contemporary scientific technologies that gave birth to new tools of expression in each era. Animation is an art form in an inextricable connection with technological aspects because it was spawned by the technical background like movies. In this regard, animation is often viewed very strongly by technical advancements in terms of an aesthetic approach. John Whitney Sr., one of the pioneers in computer graphics arts, turned his attention to the new technology called computer graphics as a means to visualize images and movement. The advent of a new medium had a strong influence not only on tools and means for novel expression but also on the gradual shift in thinking about arts and even the audiences' taste. In the 1980s, animation was combined with computer technology and the rapid progress of computer graphic technology opened up the era of new visual aesthetics, Today, the development of digital technology presents a different dimension of realism, either advocating hyperrealism by digital actors or presenting new illusionism by classic cartoon characters emphasized in a distortion or metamorphosis from a real life in order to consolidate animation realism. Based on the two perspectives mentioned above, this study can identify methods of digital character appropriation focused on the works of the ACM SIGGRAPH Asia and find how the relationship between art and technology has changed the digital realism and evolved the digital character as the digital technology has developed.