• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.77-85
• /
• 2009

With the advent of power semiconductor switching devices, power electronics relating to high frequency electromagnetic eddy current based induction heating technology have become more suitable and acceptable. This paper presents high-frequency induction heating cooking appliance circuit based on the zero current switching-PWM single ended push-pull(ZCS-PWM SEPP) resonant inverter added AC-DC converter. This inverter uses pulse-width-modulation(PWM) control method with active auxiliary quasi-resonant lossless inductor snubbers and a switched capacitor. To improved the transient performance, the PI controller is applied for this system. For the systematic parameter optimization of the PI controller, the gradient-based optimization algorithm is applied. The performance of optimized parameters is evaluated using simulation and experimental test. These results show that the proposed systematic optimal tuning method improve the transient performances of this system.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.374-375
• /
• 2010

본 논문에서는 계통 연계가 가능한 새로운 교류/직류 전력변환 장치를 제안한다. 제안된 전력변환 회로는 정현파의 입력상 전류를 가지고, 양방향 전력 전달이 가능하며, 역률 제어가 가능하다는 장점으로 인하여 계통 연계형 전력변환 장치로 적합하다. 특히 제안된 전력변환 장치는 무효전력 소자의 사용을 최소화하여 시스템의 신뢰성을 증대시키고, 전기적 절연을 고주파 변압기를 통하여 얻도록 하여 시스템의 부피를 줄일 수 있다는 장점을 갖는다. 본 논문에서는 제안된 전력변환 회로의 구성 방법과 각 부분 별 동작에 대해서 기술하였으며 실험 장치를 구성하여 그 타당성을 입증하였다.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.147-150
• /
• 2002

HPSL(High Pressure Sodium lamp)have attracted much attention in recent years, because they offer high luminous efficiency and very long life. Recently, AC-DC converters have been widely as power factor improvement circuits in the power conversion equipment An application of the ZVT-PWM(Zero Voltage Transition Pulse Width Modulation) boost converter, which has great advantage on miniaturization and high power density, to the power factor improvement circuit of the HPSL inverter are described to identify the power factor correction characteristics of the inverter. In this paper the series-parallel resonant inverter(electronic ballast) for driving a HPS lamp is discussed. Finally, a power factor corrector is cascaded in front of the electronic ballast. Consequently, a high power factor above 0.99 and low THD on the line current can be achieved.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.274-285
• /
• 1992

Among various Power converters, a variable voltage variable frequency (VVVF) three-phase PWM inverter is regarded as most promising power converter due to its capabilities, which permits the control of voltage, frequency and harmonic contents in a single power stage employing only on DC source. As a modulating technique of the PWM inverter, the regular sampling technique has rendered possible the on-line computation and generation of PWM control waveforms with a reasonably high switching frequencies. In this paper, microprocessor based three-phase regular samping PWM inverter with real-time control algorithm and control circuits for driving three phase AC motor has been developed. Harmocic components of PWM waveform were analized theoretically in terms of Bessel function series and then calculated by digital computer and observed with spectrum analyzer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.91-93
• /
• 2008

A Buoyant Hybrid Power Generation System (BHPGS) described in this paper, is a conceptual approach to a hybrid solar-wind power generation in the near sea. The primary purpose of the BHPGS is given to improve utilization of solar cell modules. Main components of the BHPGS include a solar cell module, buoyant object, power generator, and support assembly including weight. Components such a generator controller, DC/AC converter, etc., are not configured in the current BHPGS because they can easily be purchased as a commercial-off-the-shelf product. In addition, some of the BHPGS applications are discussed.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1876-1878
• /
• 1998

For an analysis and simulation of the conducted EMI of switching converters, an accurate simulation model for MOSFET is needed. This paper presents a new modeling approach, which incorporates DC output characteristics and AC dynamics especially the parasitic capacitances. It uses Pspice ABM(Analog Behavioral Model) and the MOSFET parameters can be obtained from the Data sheet in the frequency range of interest for EMI analysis. The model verified with an experimental setup and the EMI for a test converter is analyzed with respect to the MOSFET switching waveforms.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.14-16
• /
• 2005

In this paper, a new control scheme to use 6-switch inverters for 3-phase switched reluctance motors (SRM) is proposed. Compared with the conventional asymmetric converter topology, it can minimize the entire system size and cost and can increase the efficiency. Therefore, it may have a new topology for SRM to compete the other ac motors, such as induction motors, brushless dc motors, and soon. The validity of the proposed method is verified by simulation, and experimental results.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.210-212
• /
• 2018

A new switching mode has been proposed to obtain high power factor and low THD in single stage AC-DC converter. The conventional voltage mode control in critical conduction mode distorts input current shape with poor THD in flyback topology. Once TRIAC dimmer is connected, visible flicker in the LED lamp is easily detected due to a lack of TRAIC holding current near the input voltage zero cross. The newly proposed method can shape the input current by providing a desired reference voltage so that low THD is obtained by ideal sinusoidal input current in case of no dimmer connection and flat input current performs good TRIAC dimmer compatibility in phase-cut dimming condition. To confirm the validity of the proposed method, theoretical analysis and experimental result from 8W dimmable LED lighting system are presented.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.356-357
• /
• 2013

ITER(국제 열핵융합 실험로) 핵융합 토카막 장치의 초전도 코일 부하에는 대용량 AC-DC 4상한 컨버터가 필요하다. 4상한 컨버터는 대용량 부하에 전력을 공급하기 위해서 12펄스 위상 제어 정류기의 양방향성 병렬 구조로 이루어져 있다. 컨버터의 안정된 정역 변환 동작을 위한 방법으로 순환 전류를 이용한 알고리즘이 필요하며, 본 논문에서는 4상한 컨버터의 안정된 동작을 위한 순환전류의 알고리즘을 해석 및 연구하였다. 또한 RTDS(Real Time Digital Simulator)의 RSCAD 시뮬레이션을 통해 동작 모드에 따른 컨버터의 스위칭 동작을 확인하였으며, 실제 4상한 컨버터를 RTDS와 연계하여 순환전류를 이용한 정역 운전 변환에 대한 실험 결과를 입증하였다.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.128-129
• /
• 2019

ITER AC/DC Converter는 플라즈마 운전에서 기능적인 역할과 동작 모드에 따라 PF/CS, TF, CC Plant로 구분되어 동작하며 PF, CS, VS1 컨버터는 플라즈마 전류 발생, 증감, 형상제어, 위치제어를 하며 PCS(Plasma Control System), MRC(Master Controller)에 의해 제어된다. MRC는 상위 제어인 PCS와 LCC(Local Control Cubicle)의 Middle Ware Layer에서 여러 Linux Machine들과 복잡한 통신망으로 연결되어 초전도 코일 전류 Driver에 있어서 Control과 Soft Down을 위한 Real Time 제어 기능을 한다. 본 논문은 이러한 제어를 구현하기 위한 Linux Real Time Control Thread Design의 구성과 결과를 논의하고자 한다.