• Title/Summary/Keyword: AC solution

Search Result 405, Processing Time 0.03 seconds

Voltage Stability Analysis of AC/DC Systems (AC/DC 계통의 전압안정도 해석)

  • Nam, Hae-Kon;Kim, Yong-Hak
    • Proceedings of the KIEE Conference
    • /
    • 1995.11a
    • /
    • pp.89-91
    • /
    • 1995
  • This paper describes an extension or a pair or multiple load flow solutions and nose curve method developed for voltage stability analysis or AC power systems to AC/DC systems. In this approach the converters are regarded as voltage dependent loads. Assuming that the converters at the unstable (-mode) solution consume the same power equal to the power at the stable (+mode) solution, the unstable solutions or the nose curves arc determined. This method is very efficient since estimating voltage collapse point and voltage stability margin arc determined by a few iterations of multiple load flow solutions. Also the method has the advantages that since the structure or Jacobian matrix is same with that of AC load flow, modal analysis or voltage stability is readily applicable if desired.

  • PDF

Real-time implementation of the Dolby AC-3 decoder using ARM920T (ARM920T를 이용한 Dolby AC-3 decoder의 실시간 구현)

  • Ha Jin-Ho;Kim Su-Hyun
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.167-170
    • /
    • 2001
  • 본 논문에서는 미국에서 고 선명(High Definition) TV를 위한 오디오 표준인 ATSC에 의해서 채택되고, DVD의 오디오 코덱으로 널리 채택된 Dolby AC-3 복호화기를 고정 소수점으로 변환한 후, ARM929T를 기반으로 실시간 구현하였다. 실시간 구현에 사용된 ARM920T 는 저전력 소비형 32-비트 고정 소수점 RISC 구조이며, 명령어 Cache 와 데이터 Cache, MMU(Memory Management Unit)로 구성되어 있다. 그리고 200MIPS 의 성능을 가지고 있어, 음성/오디오, 통신, 디지털 셀룰라폰에 적용할 수 있고, ASIC 화 할 수 있는 장점을 가지고 있다. 구현된 AC-3 복호화기는 약 67MIPS(6 채널, 640kbps, 48KHz)의 복잡도를 나타내며, 사용된 메모리양은 프로그램 ROM 23.3K Bytes, 데이터 ROM(table) 4.62K Bytes 및 RAM 45K Bytes 이다. 구현된 AC-3 복호화기는 Dolby사에서 제공하는 40 개의 test 벡터들을 bit-exact하게 통과하였다.

  • PDF

Behavior of Oxidative Precipitation of High-Arsenic (III) Solution Utilizing Activated Carbon with Air Injection (공기와 활성탄 병용에 의한 용액 중 고농도 3가 비소의 산화-침전 거동 연구)

  • Kim, Rina;Kim, Gahee;Kim, Kwanho;You, Kwang-suk
    • Resources Recycling
    • /
    • v.30 no.4
    • /
    • pp.11-19
    • /
    • 2021
  • Arsenic (As) oxidation followed by precipitation from a high-As(III)-containing leaching solution derived from a sulfidic ore was investigated in this study to remove aqueous As from the solution using activated carbon (AC) with air injection as an oxidant. To obtain the initial leaching solution, a domestic sulfidic ore was leached in a sulfuric acid solution at pH 1 and 50℃ for 95 h, and approximately 7 g/L of Fe and 3 g/L of As were leached out. To determine the effect of the oxidative reaction utilizing AC with air injection, the leaching solution was tested under the following five oxidative conditions at an initial pH of 1 and 90℃ for 72 h: air-only injection; air injection with 1, 5, and 10 w/v% of AC addition; and H2O2 addition. The tests in the presence of both air and AC revealed that the oxidation kinetics and As removal were improved by the reaction between the metallic species and the surface group formed on the AC surface. In addition, the greater the amount of AC added, the better was the reaction efficiency, removing 93-94% of As with more than 5 w/v% of AC addition. Finally, X-ray diffraction analysis confirmed that the precipitate formed from the oxidative reaction was scorodite (FeAsO4·2H2O).

Relaxing Effects of Acanthopanacis Cortex through NO Production and PDE-5 Inhibition in Corpus Cavernosum (오가피의 NO 생성과 PDE-5 억제를 통한 음경해면체 이완효과)

  • Kim, Ho Hyun;Park, Sun Young
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.31 no.1
    • /
    • pp.52-58
    • /
    • 2017
  • This study was aimed to examine relaxing effects of Acanthopanacis cortex(AC) through nitric oxide(NO) production and phosphodiesterase type 5(PDE-5) inhibition in corpus cavernosum. In order to define the relaxation effects of AC extract, rabbit corpus cavernous tissues were prepared in $2{\times}2{\times}8mm$ sized strip. AC extract ($0.01-3.0mg/m{\ell}$) were treated in contracted strips induced by phenylephrine(PE) and $N{\omega}$-nitro-L-arginine (L-NNA) was treated before AC extract-treated. And calcium chloride($Ca^{2+}$) 1 mM was infused into precontracted strips after pretreatment of AC extract in $Ca^{2+}-free$ krebs-ringer solution. When AC extract was applied to human umbilical vein endothelial cell(HUVEC), cell viability was measured by MTT assay, and NO concentration was measured by Griess reagent system. Ratio of smooth muscles to collagen fibers and eNOS, PDE-5 positive reaction were measured by histochemical and immunohistochemical process on mice corpus cavernosum. AC extract significantly affected relaxion of the cavernous strips, and the pretreatment of L-NNA inhibited AC extract-induced relaxation. Contraction induced by the addition of $Ca^{2+}$ was inhibited by treatment with the AC extract in $Ca^{2+}-free$ solution. In AC group, NO concentration, ratio of smooth muscle to collagen fibers, and eNOS positive reaction were increased, PDE-5 positive reaction was decreased compared to PE group. As a result of the above experiment, it was thought that AC extract inhibits the inflow of extracellular $Ca^{2+}$ by activating cGMP through the increase of eNOS / NO and the decrease of PDE-5 which inhibits cGMP activity, in the corpus cavernosum.

Photocatalytic activity of Fe treated AC/TiO2 composites between visible light and UV light irradiation (가시광선과 UV광선에 의한 Fe 처리된 AC/TiO2 복합체의 광분해활성)

  • Meng, Ze-Da;Zhang, Kan;Oh, Won-Chun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.5
    • /
    • pp.1760-1767
    • /
    • 2010
  • FAT compounds photocatalysts were prepared with $TiOSO_4{\cdot}xH_2O$ (TOS) by a sol-gel method. The samples were characterized by scanning electron microscopy (SEM), BET specific surface area, X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The SEM results showed that ferric compounds and titanium dioxide were fixed onto the AC surfaces. The XRD results showed that Fe-AC/$TiO_2$ composites mostly contained anatase phase. EDX showed the presence of C, O, and Ti with Fe peaks in all samples. The photocatalytic activities were evaluated by the photocatalytic oxidation of methylene blue (MB) solution, via compare photodegradation of MB solution under visible light and UV light separately. Fe-AC/$TiO_2$ composites had an excellent photocatalytic under strong visible light irradiation. A small amount of Fe ions in AC/$TiO_2$ particles could obviously enhance their photocatalytic activity.

AC and DC anodization on the electrochemical properties of SS304L: A comparison

  • Nur S. Azmi;Mohd N. Derman;Zuraidawani Che Daud
    • Advances in materials Research
    • /
    • v.13 no.3
    • /
    • pp.153-160
    • /
    • 2024
  • This study investigates the application of alternating current (AC) and direct current (DC) anodization techniques on stainless steel 304L (SS304L) in an ethylene glycol and ammonium fluoride (NH4F) electrolyte solution to produce a nano-porous oxide layer. With limited research on AC anodizing of stainless steel, this study focuses on comparing AC and DC anodization in terms of current density versus time response, phase analysis using X-ray diffraction (XRD), and corrosion rate determined by linear polarization. Both AC and DC anodization were performed for 60 minutes at 50 V in an electrolyte solution containing 0.5% NH4F and 3% H2O in ethylene glycol. The results show that AC anodization exhibited higher current density compared to DC anodization. XRD analysis revealed the presence of ferrite (α-Fe) and austenite (γ-Fe) phases in the as-received specimen, while both AC and DC anodized specimens exhibited only the γ-Fe phase. The corrosion rate of the AC-anodized specimen was measured at 0.00083 mm/year, lower than the corrosion rate of the DC-anodized specimen at 0.00197 mm/year. These findings indicate that AC anodization on stainless steel offers advantages in terms of higher current density, phase transformation, and lower corrosion rate compared to DC anodization. These results highlight the need for further investigation and exploration of AC anodization as a promising technique for enhancing the electrochemical properties of stainless steel.

Adsorption of lisinopril and chlorpheniramine from aqueous solution on dehydrated and activated carbons

  • El-Shafey, El-Said I.;Al-Lawati, Haider A. J.;Al-Saidi, Wafa S. H.
    • Carbon letters
    • /
    • v.19
    • /
    • pp.12-22
    • /
    • 2016
  • Date palm leaflets were used as a precursor to prepare dehydrated carbon (DC) via phosphoric acid treatment at 150℃. DC, acidified with H3PO4, was converted to activated carbon (AC) at 500℃ under a nitrogen atmosphere. DC shows very low surface area (6.1 m2/g) while AC possesses very high surface area (829 m2/g). The removal of lisinopril (LIS) and chlorpheniramine (CP) from an aqueous solution was tested at different pH, contact time, concentration, and temperature on both carbons. The optimal initial pH for LIS removal was 4.0 and 5.0 for DC and AC, respectively. However, for CP, initial pH 9.0 showed maximum adsorption on both carbons. Adsorption kinetics showed faster removal on AC than DC with adsorption data closely following the pseudo second order kinetic model. Adsorption increases with temperature (25℃–45℃) and activation energy (Ea) is in a range of 19–25 kJ mol/L. Equilibrium studies show higher adsorption on AC than DC. Thermodynamic parameters show that drug removal is endothermic and spontaneous with physical adsorption dominating the adsorption process. Column adsorption data show good fitting to the Thomas model. Despite its very low surface area, DC shows ~70% of AC drug adsorption capacity in addition of being inexpensive and easily prepared.

Fast Mixed-Integer AC Optimal Power Flow Based on the Outer Approximation Method

  • Lee, Sungwoo;Kim, Hyoungtae;Kim, Wook
    • Journal of Electrical Engineering and Technology
    • /
    • v.12 no.6
    • /
    • pp.2187-2195
    • /
    • 2017
  • In order to solve the AC optimal power flow (OPF) problem considering the generators' on/off status, it is necessary to model the problem as mixed-integer nonlinear programming (MINLP). Because the computation time to find the optimal solution to the mixed-integer AC OPF problem increases significantly as the system becomes larger, most of the existing solutions simplify the problem either by deciding the on/off status of generators using a separate unit commitment algorithm or by ignoring the minimum output of the generators. Even though this kind of simplification may make the overall computation time tractable, the results can be significantly erroneous. This paper proposes a novel algorithm for the mixed-integer AC OPF problem, which can provide a near-optimal solution quickly and efficiently. The proposed method is based on a combination of the outer approximation method and the relaxed AC OPF theory. The method is applied to a real-scale power system that has 457 generators and 2132 buses, and the result is compared to the branch-and-bound (B&B) method and the genetic algorithm. The results of the proposed method are almost identical to those of the compared methods, but computation time is significantly shorter.

Kimchi Quality Affected by the Addition of Acetic Acid Solution Containing Calcium (칼슘을 함유한 초산용액 첨가가 김치의 숙성 중 품질에 미치는 영향)

  • 박우포;유재일;이미정
    • Food Science and Preservation
    • /
    • v.8 no.2
    • /
    • pp.151-156
    • /
    • 2001
  • Acetic acid solution containing calcium (AC) was added to kimchi seasonings by 10% and 205, and heat treatment at 70$\^{C}$ for 15 min was also tried, respectively. Kimchi with treated seasonings was investigated for the quality during fermentation at 10$\^{C}$. Heat treatment with 20% AC showed a retarded decrease pH than others on 10 days, but there was no great difference after 14 days. Higher titratable acidity was revealed in kimchi with AC during the fermentation. Total microbial lead and lactic acid bacterial count were generally lower in kimchi with AC. Reducing sugar content was maximum for all samples on 5 days, and then decreased thereafter. Redness of control kimchi was steadily increased during fermentation, but was lower than those of other treatments.

  • PDF

Deadbeat Direct Active and Reactive Power Control of Three-phase PWM AC/DC Converters

  • Gandomkar, Ali;Seok, Jul-Ki
    • Journal of Power Electronics
    • /
    • v.18 no.6
    • /
    • pp.1634-1641
    • /
    • 2018
  • This study focuses on a high-performance direct active and reactive power controller design that is successfully applicable to three-phase pulse width modulation (PWM) AC/DC converters used in renewable distributed energy generation systems. The proposed controller can overcome the sluggish transient dynamic response of conventional controllers to rapid power command changes. Desired active and reactive powers can be thoroughly obtained at the end of each PWM period through a deadbeat solution. The proposed controller achieves an exact nonlinear cross-coupling decoupling of system power without using a predefined switching table or bang/bang hysteresis control. A graphical and analytical analysis that naturally leads to a control voltage vector selection is provided to confirm the finding. The proposed control strategy is evaluated on a 3 kW PWM AC/DC converter in the simulation and experiment.