• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.81-89
• /
• 2002

The sensorless AC motor drive is a popular topic of study due to the cost and reliability of speed and position sensors. Most sensorless algorithms are based on the mathematical modeling of motors including electrical variables such as phase current and voltage. Therefore, the accuracy of such variables largely affects the performance of the sensorless AC motor drive. However, the output voltage of the SVPWM-VSI, which is widely used in sensorless AC motor drives, has considerable errors. In particular, the SVPWM-VSI is error-prone in the low speed range because the constant DC link voltage causes poor resolution in a low output voltage command and the output voltage is distorted due to dead time and voltage drop. This paper investigates a novel high-performance strategy for overcoming these problems in a sensorless ac motor drive. In this paper, a variation of the DC link voltage and a direct compensation for dead time and voltage drop are proposed. The variable DC link voltage leads to an improved resolution of the inverter output voltage, especially in the motor's low speed range. The direct compensation for dead time and voltage drop directly calculates the duration of the switching voltage vector without the modification of the reference voltage and needs no additional circuits. In addition, the proposed strategy reduces a current ripple, which deteriorates the accuracy of a monitored current and causes torque ripple and additional loss. Simulation and experimentation have been performed to verify the proposed strategy.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2162-2167
• /
• 2009

A Low cost and variable speed brushless motor drive system with single switch per phase is presented. The motor drive is realized with a novel two-phase flux-reversal-free switched reluctance motor and a split AC two switch converter. The strategy of the controller and the converter for its realization are described. Comparisons between a split AC converter, asymmetric converter, split DC converter, single controllable switch converter, and N+1 converter are performed for its device rating, cost, switching losses and conduction losses, and converter efficiency. The split AC converter is analyzed and simulated to verify the characteristics of the converter circuitry and control feasibility and the simulation results are presented. The efficiency with various loads is numerically estimated and experimentally compared from viewpoint of subsystem and system in details. The focus of this paper is to compare the presented motor drive system to the asymmetric converter system throughout experiments and demonstrate single switch per phase converter having comparable efficiency as the asymmetric converter system.

• 조명전기설비학회논문지
• /
• 제28권10호
• /
• pp.37-42
• /
• 2014

This paper discusses study of sensorless control of a variable speed switched reluctance motor (SRM) for electric AC compressors on electrical vehicles. A typical SRM drive requires a position sensor such as an encoder or hall sensor to measure the angular rotor position. However, harsh environment in electrical AC compressors for electric vehicles makes it difficult to use the position sensor in their motor drive system. Therefore, a sensorless control scheme for electric compressor motors utilizing magnetic characteristics of SRM with respect to position angle and phase current is proposed. The overall variable speed SRM drive with position sensorless control scheme has been modeled using Matlab/Simulink software and closed loop current control simulation is presented to validate the proposed sensorless drive control.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권2호
• /
• pp.185-191
• /
• 2004

This study describes the scheme of vector drive system without speed sensor for AC servo motor using theory of a flux observer and based on the field oriented vector control. The new method of speed estimation is presented from operate with the position and magnitude of the secondary flux which obtain from the voltage reference and detected current. As the estimated speed is settled by the flux and the machine-specific parameters. this method don't need to adjust the gain of the parameter. Based on the derived theory for vector control. the scheme for sensorless vector drive of AC servo motor is designed and realized. And the experiment verifies it passable to realize the sensorless vector drive based on a field-oriented type.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.38-44
• /
• 2015

This paper presents the sensorless drive method for mono inverter dual parallel (MIDP) surface mounted permanent magnet synchronous motor (SPMSM) drive system. MIDP motor drive system is a technique that can reduce the cost of the multi motor driving system. To maximize this merit of the MIDP motor drive system, the sensorless technique is essential to eliminate the position sensors. This paper adopts an appropriate sensorless method for MIDP SPMSM drive system, which uses the reduced order observer and phase locked loop (PLL) to reduce the calculation burden. The I-F control method is implemented for start-up and low speed operation. The validity and performance of the proposed algorithm are shown via experiments with 600-W SPMSMs.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.279-284
• /
• 2011

Network-based controls for ac motor drive systems are becoming increasingly important. In this paper, an ac motor control system is implemented by a motor control module and three sensor modules such as a voltage sensor module, a current sensor module, and an encoder module. There will inevitably be network time delays from the sensor modules to the motor control system, which often degrades and even destabilizes the motor drive system. As a result, it becomes very difficult to estimate the network delayed ac sensor data. An algorithm to reduce the effects of network time delays on sensor data is proposed, using both a synchronization signal and a simple method for estimating the sensor data. The algorithm is applied to a vector controlled induction motor drive system, and the performance of the proposed algorithm is verified with experiments.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.79-87
• /
• 2008

This paper presents a simple circuit topology of the auxiliary active quasi-resonant DC link snubber-assisted three phase voltage source soft-switching inverter for small scale PM motor drive applications. The pulse processing drive circuit interface and its soft-switching operation are discussed from an experimental point of view. Moreover, its conductive noise is measured and evaluated for electrical AC servo motor drive as compared with that of the conventional hard switching inverter.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1495-1502
• /
• 2017

The Theory of operation of switched reluctance motors (SRM) depends on the reluctance torque, where energy is transferred to stator winding only. Although its construction is simple, the electrical design is complex, due to the switching configuration needed to deliver power to stator coils. However, because of the nonlinearly of magnetic circuit, SRM has torque ripple. This paper proposes a new strategy to drive SRM from a single-phase AC supply. Each stator winding is connected to AC-DC or AC-AC converters, which is called branch. All branches are connected in parallel to a single-phase AC supply. A shaft encoder allows current production in stator winding during the positive torque production region and terminates it during the negative torque production region. A magnetic flux is produced between stator poles when current is supplied from AC supply to stator coil and repeats many cycles as long as the rate of change of stator inductance is positive. Different possibilities for the configurations of AC-AC or AC-DC converters are introduced to drive SRM from the single-phase AC supply. A case study is presented for a SRM fed from AC supply through semi-controlled AC-DC converter is presented. A simulation model is introduced and verified by experimental rig for two-phase SRM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.400-402
• /
• 1996

The paper describes the control strategy and hardware design for forced commutation cycloconverter which was developed for ac servo motor drive application of vector control. 12-pulse cycloconverter is used to investigate experimentally the performance of an induction motor drive system. The cycloconverter has the facility for continuous control of both the frequency and magnitude of the output voltage to keep a constant flux in the induction motors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1211-1214
• /
• 1992

본 논문에서 제안한 Fara DS Series의 AC SERVO (DC BRUSHLESS) MOTOR 제어기는 ROBOT, CNC, 각종 공작기계및 FA기기에서 MOTOR를 구동 원으로 사용하는데 사용되는 제품이다. AC SERVO MOTOR DRIVE의 Inverter에 IGBT(Insulated Gate Bipoler Transistor)를 사용하여 Switching 주파수를 높임으로써 Motor를 가변속 제어할때 발생하는 소음 및 진동을 극소화 하였다. 또한 일반적으로 Motor 속도제어를 급감속으로 제어할때 Servo Motor의 비선형 특성으로 인한 전류위상을 보상하여 모든 동작구간에서 최적의 상태의 제어가 되도록 개발하였다. 그리고 다양한 User Option 기능을 내장하여 User가 원하는 제어대상에 효과적으로 적용할 수 있도록 하였다. 아울러 MOTOR 제어기에 내장 된 다수의 보호기능을 통해서 Motor운전중 발생하는 이상상태에 대해 제어기를 보호할 수 있도록 하였다. 제안한 제어기는 부하변동, 전압변동, 온습도변동에 대해 속도변동율을 최소화 함으로써 ROBOT, CNC등 FA분야에서 폭넓게 이용할수 있다.