• 제목/요약/키워드: AC coupling

검색결과 144건 처리시간 0.029초

AC-3 Decoding Algorithm Software 구현에 관한 연구 (A Study on Implementing of AC-3 Decoding Algorithm Software)

  • 이건욱;박인규
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 추계종합학술대회 논문집
    • /
    • pp.1215-1218
    • /
    • 1998
  • 본 논문은 Digital Audio Compression(AC-3) Standard 인 A-52를 기반으로 하였으며 Borland C++3.1 Compiler를 사용하여 AC-3 Decoding Algorithm 구현하였다. Input Stream은 DVD VOB File에서 AC-3 Stream만을 분리하여 사용하며 최종 출력은 16 Bit PCM File이다. AC-3의 Frame구조는 Synchronization Information, Bit Stream Information, Audio Block, Auxiliary Data, Error Check로 구성된다. Aduio Block 은 모두 6개의 Block으로 나뉘어져 있다. BSI와 Side Information을 참조하여 Exponent를 추출하여 Exponent Strategy에 따라 Exponent를 복원한다. 복원된 Exponent 정보를 이용하여 Bit Allocation을 수행하여 각각의 Mantissa에 할당된 Bit수를 계산하고 Stream으로부터 Mantissa를 추출한다. Coupling Parameter를 참조하ㅕ Coupling Channel을 Original Channel로 복원시킨다. Stereo Mode에 대해서는 Rematrixing을 수행한다. Dynamic Range는 Mantissa와 Exponent의 Magnitude를 바꾸는 것으로 선택적으로 사용할 수 있다. Mantissa와 Exponent를 결합하여 Floating Point coefficient로 만든 후 Inverse Transform을 수행하면 PCM Data를 얻을 수 있다. PC에서 듣기 위해서는 Multi Channel을 Stereo나 Mono로 Downmix를 수행한다. 이렇게 만들어진 PCM data는 PCM Data를 재생하는 프로그램으로 재생할 수 있다.

  • PDF

전위강하법에 의한 접지임피던스 측정 시 오차요인 분석 (Analysis of error factors of the Fall-of-potential test method in measurements of grounding impedance)

  • 전병욱;이수봉;정동철;이복희;안창환
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 춘계학술대회 논문집
    • /
    • pp.313-316
    • /
    • 2008
  • This paper presents the error factors of Fall-of-potential test method used in measurements of the grounding-system impedance. This test methods inherently can introduce two possible errors in the measurements of grounding-system impedance: (1) ground mutual resistance due to current flow through ground from the ground electrode to the current probe, (2) ac mutual coupling between the current test lead and the potential test lead. The errors of ground mutual resistances and ac mutual coupling are expressed by the equation in calculating grounding impedance. These equations were calculated by Matlab that is commercial tool using mathematical calculation. The results of calculation were applied to correct grounding impedance.

  • PDF

AC 커플링 기반 무선 신호 전송을 위한 평면 나선형 인덕터의 특성 (Characteristic of Planar Spiral Inductor for Wireless Signal Transmission based on AC Coupling)

  • 김재욱
    • 한국산학기술학회논문지
    • /
    • 제13권9호
    • /
    • pp.4126-4130
    • /
    • 2012
  • 본 논문에서는 고주파수 무선 신호 전송을 위한 AC 커플링(Coupling) 기반의 평면 나선형 인덕터를 제안하고, 이에 대한 다양한 구조의 인덕터를 설계, 모델링 및 특성을 분석하였다. 커패시턴스의 의한 영향을 줄이기 위해서는 두 박막 인덕터가 서로 평행하게 위치함으로서 인덕터 간의 커패시턴스를 줄여야 한다. 이를 위해 두 가지 구조를 제안하였다. 첫 번째 구조는 inter-diagonal 구조로 평행한 두 인덕터의 도선 부분이 겹치지 않게 만든 구조이다. 이 구조의 경우 비록 평행하게 겹치지는 않지만 도선의 두께와 폭이 좁으므로 서로 엇갈리는 위치에 도선이 위치하더라도 실제 커패시턴스의 변화가 작아서 전체적인 S-파라미터의 특성이 크게 변하지 않았다. 두 번째 구조는 On-chip형 구조로 두 박막 인덕터가 평행하게 존재하지만 마주보지 않게 사선형으로 배치한 구조이다. 이 구조의 경우 박막 인덕터 간의 수평거리가 길어짐에 따라 두 번에 걸쳐서 일어나는 공진이 한 번으로 줄어드는 것을 볼 수 있는데, 이는 두 인덕터 간의 거리가 멀어짐으로 인해 박막 인덕터 간의 커패시턴스 영향이 점점 줄어들기 때문이다.

Junctionless FET로 구성된 적층형 3차원 인버터의 AC 특성에 대한 연구 (AC Electrical Coupling of Monolithic 3D Inverter Consisting of Junctionless FET)

  • 김경원;안태준;유윤섭
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 춘계학술대회
    • /
    • pp.529-530
    • /
    • 2017
  • Junctionless FET(JLFET)로 구성된 적층형 3차원 인버터의 전기적 상호작용을 연구하였다. Inter Layer Dielectirc (ILD) 두께에 따른 상단 JLFET의 $N_{gate}-N_{gate}$ 정전용량과 전달 컨덕턴스의 특성 변화를 하단 JLFET 게이트 전압에 따라서 조사하였다. 상단과 하단 JLFET 사이 간격이 수십 nm 인 적층형 구조를 사용할 때에 두 트랜지스터의 거리에 따른 AC 전기적인 상호작용을 고려해야 한다.

  • PDF

커플링/디커플링 네트워크 내장 서지발생장치의 설계 및 제작 (Design and Fabrication of a Surge Generator with Coupling/Decoupling Networks)

  • 김남훈;강태호;신한신;길경석
    • 한국전기전자재료학회논문지
    • /
    • 제33권2호
    • /
    • pp.130-134
    • /
    • 2020
  • Metal oxide varistors (MOVs) protect circuits and devices from transient overvoltages in electric power systems. However, a MOV continuously deteriorates owing to manufacturing defects or repetitive protective operations from transient overvoltages. A deteriorated MOV may result in a short circuit or a line-ground accident. Previous studies focused on the analysis of deterioration mechanisms and condition diagnosis techniques for MOVs owing to their recent growth of use. An accelerated deterioration experiment under the same conditions in which a MOV operates is essential. In this study, we designed and fabricated a surge generator that can apply a surge current to a MOV connected to AC mains. The coupling network operates at a low impedance against the surge current from the surge generator and transfers the surge current to the MOV under test. It also acts as a high impedance against AC mains for the AC voltage not to be applied to the surge generator. The decoupling network operates at a high impedance against the surge current and blocks the surge current from AC mains. It also acts as a low impedance against AC mains for the AC voltage to be applied to the MOV under test. The prototype surge generator can apply the 8/20 us up to 15 kA on AC voltages in the approximate range of 110~450 V, and it fully operates on a LabVIEW-based program.

Deadbeat Direct Active and Reactive Power Control of Three-phase PWM AC/DC Converters

  • Gandomkar, Ali;Seok, Jul-Ki
    • Journal of Power Electronics
    • /
    • 제18권6호
    • /
    • pp.1634-1641
    • /
    • 2018
  • This study focuses on a high-performance direct active and reactive power controller design that is successfully applicable to three-phase pulse width modulation (PWM) AC/DC converters used in renewable distributed energy generation systems. The proposed controller can overcome the sluggish transient dynamic response of conventional controllers to rapid power command changes. Desired active and reactive powers can be thoroughly obtained at the end of each PWM period through a deadbeat solution. The proposed controller achieves an exact nonlinear cross-coupling decoupling of system power without using a predefined switching table or bang/bang hysteresis control. A graphical and analytical analysis that naturally leads to a control voltage vector selection is provided to confirm the finding. The proposed control strategy is evaluated on a 3 kW PWM AC/DC converter in the simulation and experiment.

AWGN 채널환경에서 AC-Coupling기법을 이용한 Direct-Conversion 수신기의 성능분석에 관한 연구 (A Study on a Performance Analysis of Direct-Conversion Receiver Using AC-Coupling Method in Additive White Gaussian Noise Channel Environment)

  • 박성진;김칠성;성태경;조형래
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2000년도 춘계종합학술대회
    • /
    • pp.205-209
    • /
    • 2000
  • 현재의 무선통신기기는 다양한 멀티미디어의 제공과 함께 저전력, 소형·경량화, 단말기 가격의 저렴화가 개발의 목표가 되고 있다. 그러나, 기존의 무선통신시스템인 헤테로다윈 방식으로는 사용부품의 다양성 때문에 소형·경량화 및 부품의 On-Chip 작업에 어려움이 있어 미래형무선통신의 시스템으로는 적합하지 못하다. 이에 현재 연구개발이 진행되고 있는 방식 직접변환(Direct-Conversion)방식이다. 직접변환방식은 무선주파수 대역을 바로 기저대역을 하향변환 하므로써, 부가적인 부품의 사용과 소비전력의 감소에 상당한 이점이 있다. 이에 직접변환방식에 대한 이론적 설명과 함께 현재 무선통신 시스템으로 사용하기 위해 해결해야될 과제인 DC-Offset의 설명과 그 제거방법중의 하나인 AC-Coupling 기법의 시스템 적용으로 인한 시스템의 성능향상을 예측하고자한다

  • PDF

A Study of Distortion of Waveform in AC PDP

  • Kim, Min-Seok;Lim, Hun-Yong;Lee, Jeong-Hae;Whang, Ki-Woong
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.561-563
    • /
    • 2004
  • In this paper, distortion of waveform in AC-PDP module has been studied. The propagation losses and interference due to coupling between the electrodes can be considered as the causes for waveform distortion. The distorted waveform has been obtained from the calculated propagation losses. The coupling between the electrodes has been measured using a proper experimental setup. This distorted waveform could account for underfiring problem in AC PDP module.

  • PDF

$S^4$-PFC에서 커플링 인덕터를 이용하여 DC 버스 스트레스를 저감시킨 AC/DC 컨버터 ($S^4$-PFC AC/DC Converter To Reduce DC Bus Stress With Coupling Inductor)

  • 이장현;김태웅;이성백
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 F
    • /
    • pp.2515-2517
    • /
    • 1999
  • In this paper we analysis DC bus voltage stress at high line voltage and light load in $S^4$-PFC Isolated AC/DC converter with DC bus voltage feedback using coupling in transformer. In this converter, the principle of operation and the practical problems in the design are considered. Simulation and experimental results are presented to verify the operation and performance of the $S^4$-PFC converter with DC bus voltage feedback. Experimental sets are performed in the conditions; switching frequency 100 kHz, output of 5 V, 60W, and universal line input voltage.

  • PDF

실란 계면 결합제 함량에 따른 XLPE/SXLPE 블렌드의 전기적 성질 (Electrical properties of XLPE/SXLPE blends as a function of silane coupling agent contents)

  • 고정우;서광석
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마
    • /
    • pp.33-36
    • /
    • 2000
  • Electrical properties of Crosslinked polyethylene/silane crosslinked polyethylene (XLPE/SXLPE) blends were studied. Silane coupling agents of various contents were added to blends and their water tree and electrical breakdown characteristics were investigated. The water tree length of XLPE/SXLPE were increased by the addition of silane coupling agents except the case of SXLPE 10 % containing coupling agents of 0.5, 1.0 phr. AC breadown strength slightly increased by the addition of coupling agents to XLPE/SXLPE blends in cases of SXLPE 20 % containing coupling agents of 2.0 phr and SXLPE 50 %. The tendency of effects on water tree and breakdown characteristics was inverse.

  • PDF