• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.50-56
• /
• 2010

$La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ (LSCF) powders with different particle sizes, synthesized through a citrate complexation method and a gel-casting technique, are used to fabricate porous LSCF cathodes with graded microstructures via tape casting. To create porous electrodes with desired porosity and pore structures, graphite and starch are used as pore former for different layers of the graded cathode. Examination of the microstructures of the as-prepared LSCF cathode using an SEM revealed that both grain size and porosity changed gradually from the catalytically active layer (near the electrodeelectrolyte interface) to the current collection layer (near the electrode-interconnect interface). Impedance analysis showed that a 3-layer LSCF cathode with graded microstructures exhibited much-improved performance compared to that of a single-layer LSCF cathode, corresponding to interfacial resistance of 0.053, 0.11, and 0.27 $\Omega{\cdot}cm^2$ at 800, 750, and $700^{\circ}C$ respectively.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.2
• /
• pp.237-245
• /
• 2021

Atomic layer deposition (ALD) enhances the stability of cathode materials via surface modification. Previous studies have demonstrated that an Ni-rich cathode, such as LiNi_0.8Co_0.1Mn_0.1O₂, is a promising candidate owing to its high capacity, but is limited by poor cycle stability. In this study, to enhance the stability of the Ni-rich cathode, synthesized LiNi_0.8Co_0.1Mn_0.1O₂ was coated with Al₂O₃ using ALD. Thus, the surface-modified cathode exhibited enhanced stability by protecting the interface from Ni-O formation during the cycling process. The coated LiNi_0.8Co_0.1Mn_0.1O₂ exhibited a capacity of 176 mAh g^-1 at 1 C and retained up to 72% of the initial capacity after 100 cycles within a range of 2.8-4.3 V (vs Li/Li⁺. In contrast, pristine LiNi_0.8Co_0.1Mn_0.1O₂ presented only 58% of capacity retention after 100 cycles with an initial capacity of 173 mAh g^-1. Improved cyclability may be a result of the ALD coating, which physically protects the electrode by modifying the interface, and prevents degradation by resisting side reactions that result in capacity decay. The electrochemical impedance spectra and structural and morphological analysis performed using electron microscopy and X-ray techniques establish the surface enhancement resulting from the aforementioned strategy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.7
• /
• pp.966-974
• /
• 2010

The aim of this study was to examine characteristics between nutrient intakes, body composition and physical fitness in gifted athletic boys. The subjects were conducted in 50 boys aged 9~12 years living in Busan, Ulsan and Gyeongsangnam-do, Korea. Dietary intake information was collected from participants using 3-day food recorded and body composition was measured by bioelectrical impedance analysis, and their anthropometric parameters were measured. Swimming group's daily energy intakes were significantly higher compared to those of other groups. Athletics and swimming groups were significantly taller than gymnastics. Swimming group was significantly higher than gymnastics group in weight, fat mass, body fat percent and lean body mass. Athletics and swimming groups were significantly longer than gymnastics group in sit and ball throwing. Swimming group was significantly better than other groups in sit up, and athletics group was significantly faster than gymnastics group in 50 m run. In correlation result for nutrient intake and body composition: 1) Body weight shows positive correlation with protein, phosphorus, sodium, vitamin $B_1$, C and niacin. BMI shows positive correlation with sodium and niacin. Fat mass shows positive correlation with niacin and folate. Body fat% shows positive correlation with vitamin C, E, niacin and folate. LBM shows positive correlation with all elements except lipid, calcium, vitamin A, C, E and folate. In correlation result for nutrient intake and physical fitness: 2) Push up shows positive correlation with iron and vitamin C. Sit and throw ball shows positive correlation with the events except lipid, fiber, vitamin A, E and folate. Sit up shows positive correlation with vitamin $B_1$. Half squat shows positive correlation with iron. Standing long jump shows positive correlation with total energy, lipid, and vitamin A, B and $B_2$. Long run shows negative correlation with protein, carbohydrate, fiber, phosphorus, iron, sodium and zinc. Side step shows positive correlation with niacin. Sit and reach shows negative correlation with total energy, carbohydrate, phosphorus, sodium, zinc and vitamin $B_2$. In correlation result for body composition and physical fitness: 3) Sit and throw ball shows positive correlation with body weight, BMI, fat mass, body fat% and LBM. Standing long jump shows positive correlation with LBM. But long run and 50 m run shows negative correlation with body weight and LBM.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.193-199
• /
• 2017

In the paper, a dual band-notched monopole antenna is proposed for 2.4 GHz WLAN (2.4 ~ 2.484 GHz) and UWB (3.1 ~ 10.6 GHz) applications. The 3.5 GHz WiMAX band notched characteristic is achived by a pair of L-shaped slots instead of the previous U-shaped slot on the center of the radiating patch, whereas the 7.5 GHz band notched characteristic is achived by C-shaped strip resonator placed near to the microstrip feed line. The measured impedance bandwidth (${\mid}S_{11}{\mid}{\leq}-10dB$) is 8.62 GHz (2.38 ~ 11 GHz) which is sufficient to cover 2.4 GHz WLAN and UWB band, while measured band-notched bandwidths for 3.5 GHz WiMAX and 7.5 GHz bnad are 1.13 GHz (3.15 ~ 4.28 GHz) and 800 MHz (7.2 ~ 8 GHz) respectively. In particular, it has been observed that antenna has a good omnidirectional radiation patterns and higher gain of 2.51 ~ 6.81 dBi over the entire frequency band of interest.

• Journal of the Korean Ceramic Society
• /
• v.44 no.12
• /
• pp.740-746
• /
• 2007

The potential candidates for IT-SOFCs cathode materials, $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ (BSCF) and $La_{0.6}Ba_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LBCF) powders, were synthesized by a EDTA-citrate combined method from $Sr(NO_3)_2$, $Ba(NO_3)_2$, $La(NO_3)_3{\cdot}6H_2O$, $Co(NO_3)_2{\cdot}6H_2O$, $Fe(NO_3)_3{\cdot}9H_2O$, citric acid and $EDTA-NH_3$. The cathode performance of symmetrical electrochemical cells consisting of BSCF-GDC or LBCF-GDC composite electrodes and a GDC electrolyte was investigated using by AC impedance spectroscopy at the temperature range of 500 to $700^{\circ}C$. It was found that a single phase perovskite could be successfully synthesized when the precursor is heated at $850^{\circ}C$ for 2 h. Due to thermal expansion mismatch between BSCF and GDC, the composite cathodes with lower GDC content than 45 wt% were peeled off from the GDC electrolyte and their electrode polarization resistance was estimated to be high. The thermal expansion coefficient of BSCF-GDC composites was decreased with increasing the GDC content and the electrode peeling off did not occur in BSCF-45 and 55 wt% GDC composites. BSCF-45 wt% GDC composite electrode showed the lowest area specific resistances (ASR) of 0.15 and $0.04{\Omega}{\cdot}cm^2$ at 600 and $700^{\circ}C$, respectively. On the other hand, LBCF-GDC composite cathodes showed higher ASR than the BSCF-45 and 55 wt% GDC and their cathode performance were decreased with the GDC content.

• Korean Journal of Community Nutrition
• /
• v.3 no.3
• /
• pp.349-357
• /
• 1998

This study was done to investigate the effect of adolescent smoking on dietary intakes and nutritional status of serum lipids and antioxidant vitamins. Subjects were 82 somkers whose average pack-year was 0.73, and 85 nonsmokers of male technical high school students in Seoul. Anthropometric measurement was performed and % body fat was also analyzed by Bioelectrical Impedance Fatness Analyzer(GIF-891). Dietary intakes and habits were examined through questionnaires and nutrient intakes were analyzed by Computer Aided Nutritional (CAN) analysis programs. Serum TG and total cholesterol levels were measured by Spotchem sp-4410 and serum HDL-cholesterol levels were measured by test kit. serum vitamin C level was measured by 2,4-dinitrophenylhydrazine method and serum levels of vitamin A and vitamin E were measured by HPLC. All data were statistically analyzed by SAS PC package program. There was a significant difference in body fat percentage and systolic blood pressure while other anthropometric measurements were not different between smokers and monsmokers. Caloric intakes(2335㎉) in adolescent smokers tended to be higher than that of nonsmokers (2,175㎉) but the difference was not statistically significant. Intakes of protein(76.67g) and niacin(16.49㎎) in adolescent male smokers were significantly higher(P<0.05) than those of nonsmokers although other nutrient intakes were not significantly different. Analysis of serum lipids showed that serum HDL-cholesterol level of smokers was significantly different. Analysis of serum lipids showed that serum HDL-cholesterol level of smokers was significantly lower(p<0.05) than that of nonsmokers, whereas other lipid levels were not significantly different. Serum vitamin C level was also significantly lower(p<0.05) in adolescent smokers than in nonsmokers. In addition, serum vitamin E level, which was 7.85㎎/1 in smokers, was lower than that of 9.20㎎/1 in nonsmokers(p<0.05) while serum vitamin A level was not significantly different between the two groups. These results indicate that cigarette smoking in adolescence decreases serum levels of HDL-cholesterol, vitamin C and vitamin E even thoughth their smoking history is very short. (Korean J Community Nutrition 3(3) : 349∼357, 1998)

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.832-840
• /
• 2019

To improve the electrochemical performances of the cathode materials, boron-doped $LiNi_{0.90}Co_{0.05}Ti_{0.05}O_2$ were synthesized by using concentration gradient precursor. The characteristics of the prepared cathode materials were analyzed by XRD, SEM, EDS, PSA, ICP-OES and electrical conductivity measurement. The electrochemical performances were investigated by initial charge/discharge capacity, cycle stability, C-rate, cyclic voltammetry and electrochemical impedance spectroscopy. The cathode material with 0.5 mol% boron exhibited a capacity of 187 mAh/g (0.5 C) in a voltage range of 2.7~4.3 V(vs. $Li/Li^+$), and an capacity retention of 94.7% after 50 cycles. In the relatively high voltage range of 2.7~4.5 V(vs. $Li/Li^+$), it showed a high capacity of 200 mAh/g and capacity retention of 80.5% after 50 cycles.

• The Korean Journal of Physiology and Pharmacology
• /
• v.4 no.3
• /
• pp.253-261
• /
• 2000

Head-out water immersion induces marked increase in the cardiac stroke volume. The present study was undertaken to characterize the stroke volume change by analyzing the aortic blood flow and left ventricular systolic time intervals. Ten men rested on a siting position in the air and in the water at $34.5^{circ}C$ for 30 min each. Their stroke volume, heart rate, ventricular systolic time intervals, and aortic blood flow indices were assessed by impedance cardiography. During immersion, the stroke volume increased 56%, with a slight (4%) decrease in heart rate, thus cardiac output increased ${\sim}50%.$ The slight increase in R-R interval was due to an equivalent increase in the systolic and diastolic time intervals. The ventricular ejection time was 20% increased, and this was mainly due to a decrease in pre-ejection period (28%). The mean arterial pressure increased 5 mmHg, indicating that the cardiac afterload was slightly elevated by immersion. The left ventricular end-diastolic volume index increased 24%, indicating that the cardiac preload was markedly elevated during immersion. The mean velocity and the indices of peak velocity and peak acceleration of aortic blood flow were all increased by ${\sim}30%,$ indicating that the left ventricular contractile force was enhanced by immersion. These results suggest that the increase in stroke volume during immersion is characterized by an increase in ventricular ejection time and aortic blood flow velocity, which may be primarily attributed to the increased cardiac preload and the muscle length-dependent increase in myocardial contractile force.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.1
• /
• pp.43-48
• /
• 2012

This paper presents the characterization of micro-tubular SOFCs using three different anode current collecting methods of inlet current collection (IC), both current collection (BC) and total current collection (TC). The maximum power densities of SOFCs at $750^{\circ}C$ using IC, BC and TC were 56 mW/$cm^2$ (0.43 V, 0.13 A/$cm^2$), 236 mW/$cm^2$ (0.43 V, 0.55 A/$cm^2$) and 261 mW/$cm^2$ (0.43 V, 0.61 A/$cm^2$) respectively. It was confirmed by impedance spectroscopy that both the polarization resistance and the ohmic resistance were dramatically increased at SOFC with IC.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.193-193
• /
• 2011

To obtain ceramic films, the sol-gel coating technique has been broadly used with heat treatment, but crack formation tend to occur during heat treatment in thick sol-gel films. We prepared PZT thin films by sol-gel method with single-step spin coating process. The PZT solution have been synthesized using lead acetate ($Pb(CH_3COO)_2$), zirconium acetylacetonate ($Zr(OC_3H_7^n)_4$), and titanium diisopropoxide bis(acetylacetonate) 75wt% in isopropanol ($Ti(OC_3H_7^i)_2(OC_3H_7^n)_2$) as starting materials and n-propanol was selected as a solvent. The poly(vynilpyrrolidone) (PVP) was added with 0, 0.25, 0.5, 0.75, and 1 molar ratios to control viscosity of solution. We investigated influence of the viscosity on thickness, microstructure, and electrical properties of final PZT films. Thermo-gravimetric analysis and differential scanning calorimeter (TGA/DSC) was carried out from room temperature to $800^{\circ}C$ in order to measure pyrolysis temperature. Structural characteristics were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Ferroelectric and dielectric properties were measured by RT66A (Radiant) and impedance analyzer (Agilent), respectively. The thicknesses of PZT films depended on incorporation of an excess amount of PVP. Finally, we obtained PZT films of good quality without crack formation via single-step spin coating.