• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.1193-1202
• /
• 1996

This study investigates and analyzes the amount and shape of the front waist dart of the bodice and investigates the dart division method by bust size. Measurements at 5 arm positions were taken from 15 subjects. Clothing tests were given to 6 of the subjects. The conclusions were as follows: 1) Front Body surface changes were occurred around armpit and they were caused by the wrinkles of the armpit 2) The curved dart line was more appropriate for use with C cup, the large bust body, than the linear line. The changes of the dart amount at arm movements had different types by bust size. 3) Patterns for A & C cup body were adequate to divide the dart amount by 3 darts such as under the B.P., under the anterior armpit and side line, or to aggregate to 1 dart under the B.P. For the B cup body, however, the suitable pattern to use was the total dart amount divided by 1~2 darts and decreasing the waist line at the side line should be avoided.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.81-84
• /
• 2001

An inverse finite element approach is employed for more capability to design the optimum blank shape from the desired final shape with small amount of computation time and effort. In some drawing or stamping simulation with inverse method, it is difficult to apply inverse scheme due to the large aspect ratio or steep vertical angle of inclination. The reason is that initial guesses are hard to make out with present method for those cases. In this paper, a direct mesh marring scheme to generate initial guess on the sliding constraint surface described by finite element patches is suggested for one step inverse analysis to calculate initial blank shape. Radial type mapping is adopted for the simulation of rectangular cup drawing process with large aspect ratio and parallel type mapping for the simulation of S-Rail forming process with steep vertical angle of inclination.

• Journal of Environmental Health Sciences
• /
• v.28 no.5
• /
• pp.71-76
• /
• 2002

A survey of radon concentrations in both indoor and outdoor atmospheres was carried out using EIRM and Cup Monitor for the period of February 1996 to March 1997. EIRM were used to measure the indoor and outdoor radon concentration at five major cities university. Cup Monitor were also used to measure the indoor radon concentrations at shopping store, office building, apartment, hospital and house in Seoul. The mean indoor and outdoor radon concentrations at the five major cities(Seoul, Daegu, Daejon, Cwangiu and Busan) were 24.1 Bq/m$^3$and 8.62 Bq/m$^3$, respectively. The ratio of indoor to outdoor radon concentrations ranged front 1.7 to 3.9. Inspection of its seasonal distribute pattern indicates the enhancement during winter relative to summer, consistently for both indoor and outdoor air. The results of the survey showed that the concentrations in basements were clearly higher than those in usual living/working places.

• Korean Journal of Optics and Photonics
• /
• v.13 no.4
• /
• pp.324-331
• /
• 2002

The fundamentals of light-emitting diode lamp design are presented. The shapes of the reflecting cup and lens employed in LED lamps can be flexibly adjusted, over a relatively large range, by using a few parameters. The analysis of the designed lamps by Monte Carlo photon simulation shows that diverse far-field beam patterns required in various application areas can be achieved.

• Transactions of Materials Processing
• /
• v.15 no.7 s.88
• /
• pp.504-511
• /
• 2006

The drawability of AZ31B magnesium sheet is estimated at various temperatures($200,\;250,\;300,\;350\;and\;400^{\circ}C$), and forming speed(20, 50, 100mm/min), thickness(0.5, 0.8, 1.0, 1.4mm). The deep drawing process of circular cup and square cup were used in forming experiments. Experimental and FEM analysis are performed to investigate drawability and affection of controlled blank holding force. Through the controlled blank holding force, drawability was improved. Limit drawing ratio is increased from 2.1 to 3.0 in circular cup drawing and change of thickness is decreased from 16.3 to 6.9%. This result is verified by FEM analysis. Through the observation of microstructure, the main cause is investigated as a quantity of the dynamic recrystallization.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.211-213
• /
• 2017

최근 컴퓨터 네트워크를 활용하는 다양한 기기들이 개발되고 급격히 확산되면서, 컴퓨터 네크워크는 전보다 많은 보안문제에 직면하게 되었다. 이에 따라 네트워크 보안을 위한 침입탐지시스템의 필요성이 대두된다. 침입탐지시스템을 구현하기 위한 대표적인 데이터 셋으로는 KDD CUP 99(KDD'99)와 이후 KDD'99의 문제점을 보완하여 공개된 NSL-KDD가 있다. 본 논문에서는 KDD'99와 NSL-KDD를 소개하고 인공신경망을 통해 두 데이터 셋을 비교 분석하였다. Multi-Layer Perceptron을 사용해 데이터 셋을 분석해본 결과, KDD'99는 전체 정확도에서 더 높은 결과를 얻은 반면 공격 별 탐지 정확도 면에서는 NSL-KDD에 뒤쳐졌다.

• Archives of Plastic Surgery
• /
• v.33 no.6
• /
• pp.789-791
• /
• 2006

Purpose: The inverted nipple presents many problems in both cosmetic and functional aspects. The histopathologic features of inverted nipple are that inverted nipple has less fibromuscular tissue than normal nipple, short lactiferous duct and dense fibrous tissue. Many papers have been reported for correction of the inverted nipple, however not many medical literatures has specifically described about traction method. Although traditional traction methods were using half of urine cup or lid of bottle, they were uncomfortable and incapable for wearing brassiere. Methods: We invented a simple and more natural method using a dome-shape plastic disposable lid of take-out cup. We applied new device for three patients after corrective surgery. Results: For long term follow up, all patients satisfied their postoperative status and they were comportable with the lids. Conclusion: This new method is very simple, comfortable, and effective method for traction. It also allows patients to wear the brassiere.

• East Asian mathematical journal
• /
• v.21 no.1
• /
• pp.61-64
• /
• 2005

Let R be a commutative ring with identity, and let $f,\;g_i(i=1,\;\ldots,\;n),\;g_{\alpha}(\alpha{\in}S)$ be elements of R. We show that the following statements are equivalent; (i) $X_f{\subseteq}{\cup}_{\alpha{\in}S}X_{g\alpha}$ only if $X_f{\subseteq}X_{g\alpha}$ for some $\alpha{\in}S$, (ii) $V(f){\subseteq}{\cup}_{\alpha{\in}S}V(g_{\alpha})$ only if $V(f){\subseteq}V(g_{\alpha})$ for some $\alpha{\in}S$, (iii) $V(f){\subseteq}{\cup}^n_{i=1}V(g_i)$ only if $V(f){\subseteq}V(g_i)$ for some i, (iv) Spec(R) is linearly ordered under inclusion.

• Transactions of Materials Processing
• /
• v.4 no.4
• /
• pp.302-321
• /
• 1995

A method of determining an optimum blank shape for the non-circular deep drawing process is investigated. The rigid-plastic finite element method is introduced and the computer program code is developed. The ideal shape of a drawn cup with uniform wall height is assumed and metal flow is traced back-ward step by step to predict an initial blank shape of the ideal cup. For examples of the non-circular deep drawing products, three cases of drawn cup with quadrilateral punch shape are considered and optimum blank shapes for each case are proposed and compared with experimental results.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.235-238
• /
• 2005

In this study, it is investigated that the effect of material properties such as strength coefficient and strain hardening exponent on formability of AZ31 alloy sheet in square cup deep drawing process. Mechanical properties of AZ31 alloy sheet at elevated temperature $250^{\circ}C$ are obtained from uniaxial tensile tests and based on these results, a series of square cup deep drawing tests at the same temperature condition are carried out. Also, the possibilities of necking initiation is predicted by the FEM and FLD and compared with experimental results.