• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.851-858
• /
• 2014

Muscat Bailey A (MBA) wine was fermented using the indigenous Korean Saccahromyces cerevisiae strains S13 and D8, and the fermentation characteristics were compared with those of S. cerevisiae W-3, an industrial wine yeast. The strains S13 and D8 showed delayed alcohol fermentation compared with the W-3 strain, but the final alcohol contents of the S13 and D8 wines after fermentation were similar to those of the W-3 wine. The S13 wine showed significantly lower malic-acid content than the W-3 wine, but the D8 wine showed a similar level. Both the wines fermented using the S13 and D8 strains showed significantly lower acetaldehyde, methanol, and fusel oil contents, including n-propanol, iso-butyl alcohol, and iso-amyl alcohol, compared to the W-3 wine. Especially, the methanol content was 98.6 mg/L in the S13 wine and 112.0 mg/L in the D8 wine, which were much lower than 192.8 mg/L in the W-3 wine. The S13 wine obtained the highest score in terms of color among the three wines in the sensory evaluation, with lower Hunter's L, a, and b values compared to the W-3 wine.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.33-38
• /
• 2008

The probability of an oscillation occurrence in M/W frequency conversion repeaters is low on account of the different operating frequency of the input and output signals. The probability of interference caused by the M/W frequency conversion repeaters to other systems is also low because the systems are used in the line-of-sight. Therefore M/W frequency conversion repeaters are generally used for retransmitting the signal received from base station to the islands. This paper describes the design and implementation of analog predistorter for M/W frequency conversion repeaters in mobile communications. The M/W repeaters convert IF frequency of 1010+/-10MHz to RF frequency of 11GHz. A predistorter can be designed for the M/W repeater operating in either IF or M/W frequency. In this paper IF predistorter operated in 1010MHz is designed and implemented because a M/W predistorter operated in 11GHz is difficult to implement. The IF predistorter can linearize RF modules in the repeater followed by IF stages. The performance test results show that the implemented analog predistorter improves ACPR of 10dB at the output power of 25dBm with the signal frequency of 10.805GHz.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.800-808
• /
• 2015

In this study, gastritis inhibitory substance was ethanol-extracted from Saururus chinensis in order to examine the effect as a part of natural bioactive substance research. In an oral administration experiment, S. chinensis was administered at doses of 0.25 g/kg B.W. to 2 g/kg B.W., resulting in stabilization at 1.5 g/kg B.W. and an $LD_{50}$ of 1.81 g/kg B.W. In a chronic toxicity experiment, 0.5 g/kg B.W. of S. chinensis was administered for 13 weeks, but toxicity was not observed. S. chinensis ethanol-extracts were administered at a concentration of 250 or 500 mg/kg B.W. before induction of gastritis. Gastrorrhagia, stomach edema, cytokine production, and cell damage were reduced in a concentration-dependent manner. Therefore, S. chinensis ethanol extracts inhibit cell damage by stress-induced hemorrhagic gastritis in a concentration-dependent manner via inhibition of cytokine expression.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.2
• /
• pp.61-65
• /
• 2017

Purpose: The purpose of this study was to determine the correlation and ratio between the calcaneal length and width for predicting the width of calcaneus. Materials and Methods: A total of 190 feet (190 patients) were included based on computed tomography scans. The length of calcaneus (CL) was measured on the line connecting the center of a circle tangent to the cortical margin in the anterior and posterior parts of the calcaneus in a sagittal plane (W1, W2). The width of the calcaneus was defined as the horizontal line of each part (W1, W2, W3) on the same axial plane. The relationship between the measurement was determined through a correlation analysis. The reliability was assessed based on intraclass correlation coefficients. Results: The CL and widths of calcaneus (W1, W2, W3) had a good positive correlation (r=0.848 [W1/CL], r=0.738 [W2/CL], r=0.769 [W3/CL]; p<0.001). The mean CL and widths ratios were 0.33 (W1/CL), 0.37 (W2/CL), and 0.37 (W3/CL). Using these ratios to estimate the widths by multiplying each ratio by the measured calcaneal length, we found a difference between the estimated calcaneal widths and the actual measured calcaneal widths values was 0.25 mm, 0.43 mm, and 0.16 mm. All measurements showed good-to-excellent inter- and intraobserver reliability. Conclusion: This study analyzed the correlation and ratio between the length and width of the calcaneus. The results will help orthopedic surgeons fixate screws in a stable manner to prevent iatrogenic injuries to the medial neurovascular structures of the calcaneus.

• Journal of the Korean Mathematical Society
• /
• v.45 no.3
• /
• pp.771-780
• /
• 2008

Let $M_C=\(\array{A&C\\0&B}\)$ be a $2{\times}2$ upper triangular operator matrix acting on the Hilbert space $H{\bigoplus}K\;and\;let\;{\sigma}_w(\cdot)$ denote the Weyl spectrum. We give the necessary and sufficient conditions for operators A and B which ${\sigma}_w\(\array{A&C\\0&B}\)={\sigma}_w\(\array{A&C\\0&B}\)\;or\;{\sigma}_w\(\array{A&C\\0&B}\)={\sigma}_w(A){\cup}{\sigma}_w(B)$ holds for every $C{\in}B(K,\;H)$. We also study the Weyl's theorem for operator matrices.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.11
• /
• pp.20-24
• /
• 1997

We have successfully fabricated high power (~20W) laser diode array, which are useful for pumping Nd:YAG lasers. The laser diode aray has 20 100.mu.m-wide cahnnels of which space was adjusted to 350.mu.m to improve thermal characteristics. And channel width is 100.mu.m. For an uncoated LD array, the output power of 15.66W has been obtained at 41A under quasi-CW operation, which results in about 0.42W/A slope efficiency. After aR(5%) and HR (95%) coatings on both facets, the output power was improved up to 21.18W at 40A under the same operation as above and the slope efficiency was 0.795W/A. On the other hand, by using a near field measurement system consisting of objective lens, eyepiece, CCD camera and image processing board, the typical near field patten of 1*20 LD array was observed.

• Transactions of Materials Processing
• /
• v.15 no.8 s.89
• /
• pp.539-543
• /
• 2006

Experimental studies are carried out in order to investigate the effects of heat treatment on the surface machined by W-EDM. In this work, two ways of heat treatment after W-EDM are considered. As a comparison, the machined surface by a traditional method such as milling/grinding is also considered. Thereby, specimens are prepared by four different machining methods. Those are (1) milling and then grinding, (2) wire-cut electric discharge machining (W-EDM), and (3) low temperature heat treatment or (4) high temperature heat treatment after W-EDM. The resulting surface roughness are measured and the changes of surface microstructures are investigated using the scanning electron microscope (SEM) with energy dispersive X-ray spectrometer (EDS). In general, heat treatment after W-EDM result in smoother surface and better chemical composition at the machined surface. Especially, high temperature tempering could remove defects in the thermally affected zone, which cause an overall deterioration of the surface machined by W-EDM.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.83-87
• /
• 1992

Rencently, angle-resolved ultraviolet photoemission measurements of the Fermi surface contours for Mo(011) and W(011) are reported. The electron contour of W(011) is expanded upon hydrogen adsorption, which implies that the surface states consisting of electron pockets are shifted to higher binding energy. This phenomena can be explained by the band flattening. We explained here the reconstruction of W(011) surface induced by adsorption of hydrogen in terms of band flattening of surface states with a combination of S. E. Trullinger long range dipole-dipole interaction force and Kohn anomaly.

• Annual Conference of KIPS
• /
• 2013.11a
• /
• pp.989-991
• /
• 2013

세계 S/W시장은 연 평균 7.3%의 성장률을 보이며 꾸준히 성장해 왔지만 국내 S/W산업은 시장의 구조적인 문제로 인해 소프트웨어 선진국에 비해 취약한 경쟁력을 보이고 있다. 이에 따라 국가산업 발전에 막대한 영향을 끼치는 S/W 산업 육성전략과 정책이 필요한 시점이며, 본 논문에서는 국내외 소프트웨어 시장 현황을 통해 국내S/W산업의 강점과 약점을 분석하고 국내 S/W산업 육성을 위한 정책 및 발전방향을 제시하였다. 분석 결과 국내 S/W산업의 구조는 내수시장 중심, 글로벌 시장 진출 미흡, 기술 장벽이 낮은 저부가가치 S/W산업으로 그 체질적 한계를 보이고 있어 이에 대한 대책이 필요한 것으로 나타났다. 이에 대한 국내 S/W산업 발전전략으로는 인증제도 활성화 기반 마련, S/W전문인력 양성 프로그램의 다변화 등의 추진 전략을 제시하였다.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.143-147
• /
• 2010

Purpose: Nostril stenosis is an uncommon deformity that develops as a consequence of smallpox, chickenpox, tuberculosis, syphilis, congenital malformations etc. There have been several studies on the surgical techniques to treat it. However, it is difficult to maintain the result for a long time. The goal of this study is to evaluate the use of Wplasty, perialar flap as an operative techniques and expansion exercise using Foley catheter as a method to keep the patency of nostril. Methods: This is a retrospective review of the senior surgeon's (Y.L.) patients who underwent W-plasty and a perialar flap. Patients treated from 2005 to 2009 were reviewed and the postoperative results were evaluated. Average patient age was 24 years, ranged from 1 to 61 years, average follow-up period was 27.5 months, ranged from 3 to 77 months. The mild deformity was released with an incision and expansion by the ballooning of a Foley catheter and corrected by W-plasty only. However, a severe deformity required an additional procedure including perialar flap transposition. During the postoperative period, the patients maintained a nasal stent and exercise using a Foley catheter to prevent recurrence. Results: Five cases of nostril stenosis in four patients were treated using this technique. One case was corrected with W-plasty only, but four cases were more severe and were corrected with W-plasty and a perialar flap. There were no perioperative complications. The patients were satisfied with the results and retained a good shape during the follow-up periods. Conclusion: Nostril stenosis can be corrected with W-plasty and a perialar flap. A perialar flap is added if W-plasty is unable to correct the deformity. A postoperative nasal stent and expansion with a Foley catheter can help in preventing recurrences.