• ETRI Journal
• /
• v.29 no.3
• /
• pp.408-410
• /
• 2007

A 9-bit 80-MS/s CMOS pipelined folding analog-to-digital converter employing offset-canceled preamplifiers and a subranging scheme is proposed to extend the resolution of a folding architecture. A fully differential dc-decoupled structure achieves high linearity in circuit design. The measured differential nonlinearity and integral nonlinearity of the prototype are ${\pm}0.6$ LSB and ${\pm}1.6$ LSB, respectively.

• Journal of Korean Electronics
• /
• v.24 no.8
• /
• pp.9-11
• /
• 2004

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.121-126
• /
• 2006

This paper report on the design and implementation of a 9.6kbps DSSS CDMA modem for a medium speed wireless link. The proposed modem provides a general purpose I/O interface with a microprocessor. The I/O interface consists of 8-bit data bus, chip enable, read/write, and interrupt pins. In transmit block, the 8-bit data delivered from the I/O interface buffer is converted to 9.6kbps serial data, which are spreaded into 76.8kcps with 8-bit PN code generated inside the modem by direct sequence method. An 8-bit training sequence is preceded in the data frame for data synchronization in receiver. In receiver block the PN code is synchronized from the received data spreaded to 76.8kcps and find the data timing from the 8-bit training sequence. We have used the Early-and-Late integration method. The modem has been implemented and verified using a Xilix FPGA board and has been fabricated as an ASIC CHIP through Hynir $0.25{\mu}m$ CMOS. The multiple accessing method is DSSS CDMA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.998-1004
• /
• 2004

In this paper we propose a discrete bit-loading algorithm that maximizes the transmit bit rate using the channel information. to optimize the performance of the very high-speed digital subscriber line(VDSL) system under the constraint of a maximum transmit power for each user. When the power level of crosstalk is high, the power allocation of a user changes the crosstalk experienced by the other users in the same binder. In this case, the performance of DSL modems can be improved by jointly considering the bit and power allocation of all users Simulation results shows that the proposed method improves the performance compared With that of iterative water-filling method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.9
• /
• pp.1158-1165
• /
• 2021

This paper proposes a CNN accelerator which is optimized Pooling layer operation incorporated in Multiplication And Accumulation(MAC) to reduce the memory size. For optimizing memory and data path circuit, the quantized 8bit integer weights are used instead of 32bit floating-point weights for pre-training of MNIST data set. To reduce chip area, the proposed CNN model is reduced by a convolutional layer, a 4*4 Max Pooling, and two fully connected layers. And all the operations use specific MAC with approximation adders and multipliers. 94% of internal memory size reduction is achieved by simultaneously performing the convolution and the pooling operation in the proposed architecture. The proposed accelerator chip is designed by using TSMC65nmGP CMOS process. That has about half size of our previous paper, 0.8*0.9 = 0.72mm². The presented CNN accelerator chip achieves 94% accuracy and 77us inference time per an MNIST image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1132-1140
• /
• 1996

In video coding systems, an effective rate control method is one of the most improtant issues for the good video quality. This paper presents an adaptive rate control scheme based on the buffer fullness, quantization, and buffer utilization for very low bit rate communication lines, such as 16kbit/s, 24bit/s, and so on. The strategy is implemented on H.263, whichis a vide coding algorithm for narrow band telecommunication channels up to 64kbit/s recommended by ITU-T SG15, to show the effectiveness. The simulation result shows that the suggested rate control scheme has better SNR performance and buffer utilization of source coder than those of linear and non-linear[9] buffer control strategies.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.261-264
• /
• 2005

선진국들은 공모 사업을 통해 많은 블록 암호가 개발되었으나 국내에서 개발된 블록 암호들은 크게 주목 받지 못했다. 블록 암호 개발은 기본의 암호와 차별성, 안전성 그리고 여러 플랫폼에서의 효율성이 중시되는데 이러한 조건을 다 만족하는 것은 쉽지 않기 때문이다. 본 논문은 128bit 블록 단위에서 128, 196, 256bit 키를 사용하는 새로운 블록 암호 알고리즘을 제안한다. 기존의 블록 암호 알고리즘은 SPN(Substitution-Permutation Network)구조, Feistel Network구조 등인데 본 논문에서 제안한 블록 암호 알고리즘은 변형된 Feistel Network구조로 입력 값 전체에서 선택된 32bit 만 update된다. 이러한 구조적 특성은 기존은 블록 암호 알고리즘들과 큰 차별이 되고 있다. PKC블록 암호 알고리즘은 국제 표준 블록 암호 알고리즘인 AES와 국내 표준 블록 암호 알고리즘인 SEED와 수행 속도 면에서 동등하거나 많이 개선된 것을 보이고 있다. 이러한 특성을 이용하면 제한된 환경에서 수행해야 하는 스마트카드 와 같은 분야에 많이 활용 될 수 있을 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.448-451
• /
• 2011

SoC에서 칩 내부의 온도를 측정하기 위한 proportional-to-absolute-temperature (PTAT) 회로와 sensing 된 아날로그 신호를 디지털로 변환하기 위해 4-bit analog-to-digital converter (ADC)로 구성된 temperature sensor를 제안한다. CMOS 공정에서 vertical PNP 구조를 이용하여 PTAT 회로가 설계되었다. 온도변화에 둔감한 ADC를 구현하기 위해 아날로그 회로를 최소로 사용하는 successive approximation (SA) ADC가 이용되었다. 4-bit SA ADC는 capacitor DAC와 time-domain 비교기를 이용함으로 전력소모를 최소화하였다. 제안된 temperature sensor는 2.5V $0.25{\mu}m$ 1-poly 9-metal CMOS 공정을 이용하여 설계되었고, $50{\sim}150^{\circ}C$ 온도 범위에서 동작한다. Temperature sensor의 면적과 전력 소모는 각각 $130{\times}390\;um^2$과 868 uW이다.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.539-543
• /
• 2010

We present a random bit generator that uses fingerprint image for the source of random, and random bit generator using fingerprint image for the randomness has not been presented as yet. Fingerprint image is affected by the operational environments including sensing act, nonuniform contact and inconsistent contact, and these operational environments make FPI to be used for the source of random possible. Our generator produces, on the average, 9,334 bits a fingerprint image in 0.03 second. We have used the NIST SDB14 test suite consisting of sixteen statistical tests for testing the randomness of the bit sequence generated by our generator, and as the result, the bit sequence passes all sixteen statistical tests.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.88-94
• /
• 2005

This paper presents the design and implementation of a receiver operating between a rotary machine encoder and DSP. The receiver connects with the encoder using 1 bit serial data and DSP using 16 bits bus line. The receiver and encoder use the different operating frequency each other. We suggest a new apparatus and method of synchronized code for header detection in 1bit serial communication. The system operating frequency can be changed into 20MHz or 60MHz by using the external port such as 'clk_select'.