• Journal of Digital Contents Society
• /
• v.14 no.1
• /
• pp.25-33
• /
• 2013

P2P(Peer-to-Peer) architecture can reduce the network bandwidth and resource on the server since peers exchange data chunks with each other, while server-client architecture causes a lot of traffic on the server. Peers receive a data more reliably when the number of participating peer increases. Currently, P2P traffic has accounted for about 65% of the world's Internet traffic and diverse P2P streaming services have launched combining to video streaming technology. However, the requirements and data chunk delivery algorithms for mobile P2P streaming service should be investigated, since the existing P2P technologies have been developed and designed for the wired network. In particular, the bandwidth fluctuation caused by user mobility, wireless packet collisions, and packet losses brings about different problems on the mobile P2P streaming service compared to existing P2P streaming service. In this paper, we analyzed the problem of mobile P2P streaming services in the 802.11n wireless LAN environment through experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.405-409
• /
• 2009

In this paper, the effects of LLR (Log-Likelihood Ratio) approximation on LDPC (Low-Density Parity-Check) decoder performance are analyzed, and optimal design conditions of LDPC decoder are derived. The min-sum LDPC decoding algorithm which is based on an approximation of LLR sum-product algorithm is modeled and simulated by MATLAB, and it is analyzed that the effects of LLR approximation bit-width and maximum iteration cycles on the bit error rate (BER) performance of LDCP decoder. The parity check matrix for IEEE 802.11n standard which has block length of 1,944 bits and code rate of 1/2 is used, and AWGN channel with QPSK modulation is assumed. The simulation results show that optimal BER performance is achieved for 7 iteration cycles and LLR bit-width of (7,5).

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.418-420
• /
• 2005

IEEE 802.11 에서 현재까지 많이 연구되어진 주제는 노드들 간의 공평성(fairness)에 중점을 두거나 처리율(throughput)을 높이는데 초점을 맞추어 진 것들이었다. 전체 처리율을 높이는데 AP의 백오프 방식에 관련해서는 노드들 간에 관한 연구에 비하여 비교적 연구가 적은편이다. 현재 AP와 노드들은 충돌이 발생하면 BEB(Binary Exponential backoff) 방식으로 셋팅되어 사용하고 있기 때문에 1:N의 불공평한(unfairness) 상황이 발생한다. 하향링크(downlink)가 대부분인 환경에서 AP가 다른 노드들과 같은 채널 접근확률을 가진다는 것은 바람직하지 않다. 따라서 AP가 노드들보다 우선권(priority)을 높여서 처리율을 높이는 방안이 필요하다. 그래서 본 논문에서는 AP의 백오프 방식 및 CW(Contention Window)가 변화하는데 따라서 전체 처리율에 어떤 영향을 끼치는가와 노드 수에 따른 AP의 적절한 전략 과 백오프 CW값을 분석해 보았다.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.380-382
• /
• 2001

This paper presents the implementation of IEEE 802.11 Medium Access Control and Physical Layer Protocol that can be applied to wireless LAN system. We have used PRISM2 chipsets from Intersil to build the baseband, IF, and RF parts. DSSS(Direct Sequence Spread Spectrum) physical layer at 2.4GHz ISM band is adopted in the hardware prototype. To meet the high-speed requirement of physical layer, we have designed the MAC protocol layer with embedded firmware and FPGA. The prototype board is shown to be able to support the physical layer of 5GHz and 600Hz wireless LAN systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.363-371
• /
• 2013

This paper describes a multi-standard LDPC decoder which supports 19 block lengths(576~2304) and 6 code rates(1/2, 2/3A, 2/3B, 3/4A, 3/4B, 5/6) of IEEE 802.16e mobile WiMAX standard and 3 block lengths(648, 1296, 1944) and 4 code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n WLAN standard. To minimize hardware complexity, it adopts a block-serial (partially parallel) architecture based on the layered decoding scheme. A DFU(decoding function unit) based on sign-magnitude arithmetic is used for hardware reduction. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a 0.13-${\mu}m$ CMOS cell library. It has 312,000 gates and 70,000 bits RAM. The estimated throughput is about 79~210 Mbps at 100 MHz@1.8v.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.3
• /
• pp.51-57
• /
• 2010

A dual-mode direct conversion receiver is developed in $0.13\;{\mu}m$ RF CMOS process for IEEE 802.11n based wireless LAN and IEEE 802.16e based mobile WiMAX application. The RF receiver covers the frequency band between 2.3 and 2.7 GHz. Three-step gain control is realized in LNA by using current steering technique. Current bleeding technique is applied to the down-conversion mixer in order to lower the flicker noise. A frequency divide-by-2 circuit is included in the receiver for LO I/Q differential signal generation. The receiver consumes 56 mA at 1.4 V supply voltage including all LO buffers. Measured results show a power gain of 32 dB, a noise figure of 4.8 dB, a output $P_{1dB}$ of +6 dBm over the entire band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.33-41
• /
• 2007

The IEEE 802.11 DCF channel access function allows single transmission inside two-hop network in order to avoid collisions and eliminate the hidden and exposed terminal problems. Singular transmission capability causes data frames waiting for the entire roundtrip time in the transmitter neighborhood, and results in increased frame latency and lower network throughput. Real-time and pervasive applications are severely affected for the lower medium utilization; especially with high network traffic. This work proposes a new scheme with the help of Frame Aggregation technique in IEEE802.11n and overcomes the single transmission barrier maintaining the basic DCF functionality. Proposed scheme allows parallel transmissions in non-interfering synchronized slots. Parallel transmissions bypass the conventional physical carrier sense and random Backoff time for several cases and reduce the frame latency and increase the medium utilization and network capacity.

• Journal of Communications and Networks
• /
• v.4 no.3
• /
• pp.161-169
• /
• 2002

Ad hoc wireless networks involving large populations of scattered communication nodes will play a key role in the development of low power, high capacity, interactive, multimedia communication networks. Such networks must support arbitrary network connections and provide coverage anywhere and anytime. This paper partitions such arbitrarily connected network architectures into three distinct groups, identifies the associated dual network architectures and counts the number of network architectures assuming there exist N network nodes. Connectivity between network nodes is characterized as a random event. Defining the link availability P as the probability that two arbitrary network nodes in an ad hoc network are directly connected, the network connection probability $ \integral_n$(p) that any two network nodes will be directly or indirectly connected is derived. The network connection probability $ \integral_n$(p) is evaluated and graphically demonstrated as a function of p and N. It is shown that ad hoc wireless networks containing a large number of network nodes possesses the same network connectivity performance as does a fixed network, i.e., for p>0, $lim_{N\to\infty} Integral_n(p)$ = 1. Furthermore, by cooperating with fixed networks, the ad hoc network connection probability is used to derive the global network connection probability for hybrid networks. These probabilities serve to characterize network connectivity performance for users of wireless ad hoc and hybrid networks, e.g., IEEE 802.11, IEEE 802.15, IEEE 1394-95, ETSI BRAN HIPERLAN, Bluetooth, wireless ATM and the world wide web (WWW).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.59-67
• /
• 2006

OFDM (Orthogonal frequency Division Multiplexing) systems convert serial data stream to N parallel data streams and modulate them to N orthogonal subcarriers. Thus spectrum utilization efficiency of the OFDM systems are high and high-speed data transmission is possible. However, with the OFDM systems using the same modulation method at all subcarriers, the error probability is dominated by the subcarriers which experience deep fades. Therefore, in order to enhance the performance of the system adaptive modulation is required, with which the modulation methods of the subcarriers are determined according to the estimated SNRs. The IEEE 802.11a system selects various transmission speed between 6 and 54 Mbps according to the modulation mode. There are three typical methods for SNR estimation: Direct estimation method uses the frequency domain symbols to estimate SNR directly by minimizing MSE (Mean Square Error), EVM method utilizes the distance between the demodulated constellation points and received complex values, and the method utilizing the Viterbi algorithm uses the cumulative minimum distance in decoding process to estimate the SNR indirectly. Through comparison analyses of three methods we propose a new SNR estimation method, which employs both the EVM method and the Viterbi algorithm. Finally, we perform extensive computer simulations to confirm the performance improvement of the proposed adaptive OFDM systems on the basis of IEEE 802.11a.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.410-411
• /
• 2011