• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.651-660
• /
• 2011

This study was conducted to evaluate the quality characteristics of and chilling injury development in 'Ooishiwase' plum fruits after harvest, according to the ripening stage and storage temperature. The fruits were harvested at three ripening stages (60, 80, and >90% skin color) and were then stored at 1, 4, 5, 6, and $20^{\circ}C$ cold-storage rooms for up to 48 days. The fruit quality parameters, respiration patterns, and chilling injury development were monitored during the storage periods and the three days of subsequent ripening at $20^{\circ}C$. The fruits harvested at the 60%-skin-color stage maintained the flesh firmness, color, weight loss, and TA, and their respiration rates and ethylene production were decreased compared with the 80%-or >90%-skin-color fruits, at a lower storage temperature. The major symptoms of chilling injuries in the Ooishiwase plums were gel breakdown, flesh browning, and flesh translucency. These symptoms appeared at all the low-storage-temperature and ripening treatment stages. When the fruits, however, were harvested at a more immature stage and were stored at a lower storage temperature, the chilling injury development decreased. These results show that the development of chilling injury in Ooishiwase plums is related to the climacteric behavior during cold storage.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.99-106
• /
• 2017

This study focused on the issue that when a diagnostic detector is found to have a defect, a patient would be exposed to radiation and image quality would be degraded. Though dose analysis, an experiment was conducted to evaluate detector performance as Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR). Absorbed dose, SNR and CNR were measured using a dosimeter and a tissue equivalent phantom. The experiment was conducted to compare whether the dose value shown after being attached to the back side of the phantom matches the dose value attached behind the detector, where in the conditions of skull, chest and abdomen were set at 75 kVp, 25 mAs, 110 kVp, 8 mAs, and 80 kVp, 20 mAs, respectively. As a result, there was a difference in that the dose values attached to the back side of the detector were 0.004 mGy, 0.006 mGy, 0.003 mGy, whereas those of the back side of the phantom were 0.006 mGy, 0.016 mGy, 0.017 mGy. In order to match both values, the condition was increased and SNR and CNR also increased from 88.32, 88.10, 4.09, 1.63, 87.94, 79.97 to 93.87, 93.75, 4.91, 4.03, 92.02, 84.92. Though this study, we found that when a detector is found to have a aging, it shortens the life of equipment and increases the dose of a patient, also the improvement effect of image quality is inadequate.

• 한국노년학
• /
• v.40 no.1
• /
• pp.23-32
• /
• 2020

The purpose of this study is to identify lifestyle types for Koreans' time use through the 2014 National Time Survey. In this 2014 national life time survey data, the required maintenance time, mandatory time, and free time presented in the triangle model were divided into three areas, and compared and analyzed by age and region. In this type of lifestyle, teenagers, people in their 20s and 50s were given reasonable life-seeking, people in their 30s and 40s were given achievement-seeking, and people in their 60s, 70s and 80s were given passive real-life seeking. The required maintenance time of each regional lifestyle activity was Jeonbuk, Ulsan, and Gangwon took up the most time during free time. The higher the age, the higher the satisfaction level of each age, the higher the satisfaction level of life, while the satisfaction level of each region was the highest in Daejeon and the lowest in Ulsan. The satisfaction level for each lifestyle type was higher, followed by rational life pursuit, achievement pursuit and passive reality. It seems that systematic research on lifestyle will be needed in future studies through the diversification of areas of time, classification according to leisure characteristics, and type of lifestyle.

• Journal of the Korea Society for Simulation
• /
• v.20 no.2
• /
• pp.67-76
• /
• 2011

Order picking in automotive service parts warehouses is considered to be the most labor-intensive operation. Such warehouses contain hundreds of thousands of items, but normally 20% of products contribute to about 80% of turnover according to Pareto's 80-20 principle. Therefore most fast moving items are located near an outbound area which is called the "Golden Zone". Order picking routing efficiency is related to productivity and labor cost. However, most companies use simple methods. In this paper, we describe a series of computational experiments over a set of test cases where, we compared various previously existing routing heuristics to an optimal algorithm. We focus on examining the influence of the golden zone on the performance and selection of routing methods. The results obtained show that the optimal routing method increases the productivity at least 17.2%, and all the routing methods have better performance as the pick up rate from the golden zone increases.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.451-462
• /
• 2020

There are 82 volcanoes active during the 48 weeks of 2019 (January 30 to December 31, 2019; USGS data) Approximately 80~90 volcanoes are active on the Earth for a year. More than 91% of these volcanoes are took place in the circum-Pacific volcanic belt, which is commonly called 'Ring of Fire'. This status coincides with the distribution maps of active volcanoes on the earth: about 80 percent on subduction zone of the convergent plate boundaries; 15 percent on divergent plate boundaries; 5 percent on intra-plate zone. Typically five volcanoes are most active during the survey period (48 weeks); Dukono (Halmahera, Indonesia) 48 times, Aira (Kyushu, Japan) 47 times, Ebeko (Paramushir Island, Russsia) 46 times, Merapi (Central Java, Indonesia) 37 times, Krakatau (Indonesia) 33 times. The comparison of volcanic activity between 2018 and 2019 showed no significant difference. It is assumed that volcanic activity remains stable.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.307-311
• /
• 2010

The aim of this study is to investigate PAE, as the result of the test of kVp accuracy, according to detector measurement method. Based on the indicated value of 70kVp, each distance between a focus and a kVp meter was 100cm, 80cm and 60cm and the angle of X-ray tube was set on $5^{\circ},\;10^{\circ},\;15^{\circ},\;20^{\circ},\;25^{\circ},\;30^{\circ}$. Each indicated value, 60kVp, 70kVp, 80kVp, 90kVp and 100 kVp, was used compare Small focus with Large focus. As a result, PAE on the side of cathode was higher than it on the side of anode in the case of 100cm and PAE on the side of anode was higher in the case of 80cm and 60cm. The coefficient rate was stable both the side of cathode and anode in the case of 100cm and it was fluctuated in the case of 80cm and 60cm. PAE in the case of Small focus was higher than Large focus and it was disproportionate to an indicated value. Error rate was in inverse proportion to the indicated value.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.928-935
• /
• 2016

Hypsizygus marmoreus (white cultivar), also called white beech mushrooms, are edible mushrooms commercially cultivated in Korea and Japan. This study was carried out to evaluate the antioxidant properties of H. marmoreus. H. marmoreus fruit bodies were divided into pileus and stipe. The pileus and stipe were extracted into water and 80% ethanol and their antioxidant activities were analyzed. The total polyphenol content was highest in the water extract (pileus 1137.39±0.38 mg of GAE (gallic acid equivalents)/100 g, stipe 700.86±0.06 mg of GAE/100 g) compared to the ethanol extract (pileus 923.47±0.18 mg of GAE/ 100 g, stipe 324.05±0.03 mg of GAE/100 g). Ethanol extracts from pileus showed better scavenging ability on DPPH (47.32±0.23% at 10 mg/ml) and ABTS (57.33±0.10% at 10 mg/ml) than the stipe and water extract groups. Water extract from pileus were more effective in reducing power and ORAC (oxygen radical absorbance capacity) value than stipe and ethanol extract. The toxicity of water and ethanol extracts was investigated using WST-1 (Water Soluble Tetrazolium salt) assay on the mouse macrophage cell line RAW 264.7. Overall, total polyphenol content and antioxidant activities of extracts from H. marmoreus increased in a dose dependent manner while pileus was showed better total polyphenol content and antioxidant activities than stipe.

• 월간 기계설비
• /
• s.284
• /
• pp.65-80
• /
• 2014

지난 2011년 3월에 출범한 제8대 집행부는 정해돈 회장을 비롯한 회원사 모두가 한마음으로 노력한 결과 괄목할 만한 사업성과를 거두었다. 특히 설비건설업계의 오랜 숙원사업인 공공공사 분리발주 확대 법제화를 위해 각고의 노력을 기울인 끝에 국가계약법 시행령이 개정되어 올해 1월 1일부터 시행에 들어간 성과는 1994년 법 제정 이후 20년 만에 일구어낸 아주 값진 성과로 평가되고 있다. 또한 녹색건축물조성지원법 시행령에 '국토부 장관이 5년마다 기계설비 발전정책을 수립하도록 의무화'한 조문 신설로 향후 기계설비 발전계획을 정부 차원에서 수립할 수 있게 되었다. 이와 함께 건설산업 공생발전위원회를 통한 주계약자 공동도급 확대와 저가하도급 심사제도 개선 등 불공정하도급 거래 관행 개선으로 회원사의 경영환경을 크게 개선시켰다. 본지는 2011년 3월부터 2014년 2월까지 제8대 집행부의 사업실적을 점검해 본다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.474-477
• /
• 2011

본 논문에서는 내진보강공법의 내진성능향상을 평가하기 위하여 진동대실험을 실시하였다. 실험 구조체는 비보강, 보강 구조체로 각각 실규모 크기의 구조체를 2개 제작하였다. 기둥 상, 중, 하부 및 보에 각각 Strain게이지, 가속도계를 설치한 후 설계펙트럼가속도 0.15g의 30~150%까지 가속도를 증가 시키면서 실험을 수행하였다. 그 결과 비 보강 구조체는 0.2g에서 최대 80cm균열이 발생하였으나 보강 구조체는 균열이 발생하지 않았다. Strain의 변화량에서는 비 보강이 보강보다 최대 1700%크게 나타났다. 가속도의 변화량은 비 보강이 176%크게 나타났다. 진동대 실험결과 본 내진보강공법이 내진성능향상에 지대한 영향을 주고 있음이 증명되었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.73-80
• /
• 1993

There and two important variables in machining process control, which are feed and cutting speed. It is possible to improve the machining accuracy and the productivity by maintaining the optimal feed and cutting speed. In this work, a controller is designed to achieve on-line cutting force control based on the modeling of cutting process dynamics established through step response test. Two schemes are proposed and implemented. The first is feed control under the constant spindle speed and the second is spindle speed control under the constant feed. Finally, both are proved to work properly through simulation and experimentation.