• 대한토목학회논문집
• /
• 제26권2A호
• /
• pp.319-326
• /
• 2006

본 논문에서는 가정응력장과 수정된 형상함수를 이용한 새로운 8절점 hybrid/mixed 평면응력요소를 제시하였다. 가정응력장은 비적합 변위모드로부터 유도하였으며, 이는 요소의 찌그러짐에 대한 민감도를 완화시켜준다. 그리고 Cartesian 좌표계에서 9절점 등매개변수 요소와 동일한 조건하에서 2차 변위를 정확히 보간하도록 수정한 형상함수를 사용하였다. 제시한 8절점 hybrid/mixed 평면응력요소(HQ8-$14{\beta}$)의 수치해석에 대한 정확성과 효율성을 검증하기 위해 기존의 참고문헌들과 비교, 분석하였다. 그 결과 본 논문에서 제시한 요소는 요소가 왜곡된 경우를 포함하여 우수한 성능을 보였다.

• Structural Engineering and Mechanics
• /
• 제29권6호
• /
• pp.643-658
• /
• 2008

In this paper, we present a quadratic element model based on non-conforming displacement modes and modified shape functions. This new and refined 8-node hybrid stress plane element consists of two additional non-conforming modes that are added to the translational degree of freedom to improve the behavior of a membrane component. Further, the modification of the shape functions through quadratic polynomials in x-y coordinates enables retaining reasonable accuracy even when the element becomes considerably distorted. To establish its accuracy and efficiency, the element is compared with existing elements and - over a wide range of mesh distortions - it is demonstrated to be exceptionally accurate in predicting displacements and stresses.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.42-49
• /
• 2001

In this paper the efficient finite element for stress analysis of plane stress/strain problems is proposed. This element is achieved by adding the bubble-mode function to 8-node element. The stiffness matrix of the element is calculated by using modified numerical integration order to avoid spurious zero energy mode. In order to demonstrate the performance of this element numerical tests for various verification problems are carried out. The results of numerical tests show accuracy and reliability of the element presented in this paper.

• 전산구조공학
• /
• 제8권4호
• /
• pp.87-97
• /
• 1995

2차원 유한요소 모델의 동일한 형상과 하중 조건에 있어서 6절점 요소의 굽힘 강성은 8절점 요소의 굽힘 강성보다 더 크게 나타난다. 이와 같은 현상은 3차원 16절점 요소와 20절점 요소에서도 나타나며, 완전 요소의 중간 절점들을 제거하므로 인하여 나타난다. 따라서 이 현상을 상대적 강성강화 현상이라 할 수 있다. 강성강화 현상을 보정하기 위한 매우 효과적인 방법으로 가우스 적분점 수정법을 도출하였으며, 이 방법은 확장적인 강성과 같이 다른 종류의 강성을 변화시키지 않으며, 또한 패취시험을 통과하였다. 적분점 수정량은 재료의 포아송비의 함수로 나타나며, 2차원 평면응력 상태와 평면변형율 상태에 대한 두개의 수정식을 구하였고, 또한 3차원 고체요소에 대하여 확장하였다. 가우스 적분점 수정법의 효과를 검증하기 위하여 보와 판의 자유 및 강제운동 문제를 해석하였으며, 등방성 적층 보와 판에 대해서도 단층보와 단층판과 같은 방법으로 적용하여 그 효율성을 입증하였다.

• Structural Engineering and Mechanics
• /
• 제68권4호
• /
• pp.385-398
• /
• 2018

In the present paper, we offer a new flat shell finite element. It is the result of the combination of a membrane element and a bending element, both based on the strain-based formulation. It is known that $C^{\circ}$ plane membrane elements provide poor deflection and stress for problems where bending is dominant. In addition, they encounter continuity and compliance problems when they connect to C1 class plate elements. The reach of the present work is to surmount these problems when a membrane element is coupled with a thin plate element in order to construct a shell element. The membrane element used is a triangular element with four nodes, three nodes at the vertices of the triangle and the fourth one at its barycenter. Each node has three degrees of freedom, two translations and one rotation around the normal. The coefficients related to the degrees of freedom at the internal node are subsequently removed from the element stiffness matrix by using the static condensation technique. The interpolation functions of strain, displacements and stresses fields are developed from equilibrium conditions. The plate element used for the construction of the present shell element is a triangular four-node thin plate element based on Kirchhoff plate theory, the strain approach, the four fictitious node, the static condensation and the analytic integration. The shell element result of this combination is robust, competitive and efficient.

• 소음진동
• /
• 제8권1호
• /
• pp.132-138
• /
• 1998

The dynamic response of symmetric cross-ply and angle-ply composite laminated plates under impact loads is investigated using a higher order shear deformation theory. A modified Hertz law is used to predict the impact loads and a four node finite element is used to model the plate. By using a higer order shear deformation theory, the out-of-plane shear stresses, which can be a crucial factor in the failure of composite plates, are determined with significant accuracy. This is accomplished by using a stress recovery technique using the in-plane stresses. The results compared with previous investigations showed good agreement. It can be seen that this method of analyzing impact problems is more efficient than current three dimensional methods in terms of time and expense.

• 한국구조물진단유지관리공학회 논문집
• /
• 제4권2호
• /
• pp.113-129
• /
• 2000

This study evaluates the behavior and strength of an anchorage zone of the prestressed concrete box girder bridge on the Kyungboo highway railroad using the 2D SUB-3D STM approach and a linear elastic finite element analysis. The 2D SUB-3D STM approach utilizes several two-dimensional sub strut-tie models that represent the compressive and tensile stress flows of each projected plane of the three-dimensional structural concrete in the selection of a three dimensional strut-tie model, evaluation of the effective strengths of the concrete struts, and verification of the geometric compatibility condition and bearing capacity of the critical nodal zones in the selected three-dimensional strut-tie model. The finite element analysis uses an 8-node brick element and the longitudinal prestressing force is considered as the equivalent nodal force. Analysis results show that the 2D SUB-3D STM approach and linear elastic finite element method can be effectively applied to the analysis and design of three-dimensional structural concrete including a prestressed concrete box girder anchorage zone.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권3호
• /
• pp.470-487
• /
• 1996

The purpose of this study was to investigate the dynamic response of the mandible to impact and provide insight into the fracture mechanism of the mandible, by 3-dimensional finite element method. The finite element model of the mandible was developed and calculated using NASTRAN/XL (MSC co. U.S.A.) and the linear dynamic transient analysis was performed according to the impulsive force direction, force type and impulse time to the mandible. At first, the load was applied on the mandibular symphysis, body, angle and subcondylar area in the horizontal mandibular plane and the computed stress-time histories at 14 locations of the mandible were obtained. Secondly, the impulsive force was directed to the symphyseal area with changing the force magnitude and impulse time, and calculated the node displacement at 8 locations of mandible. The conclusions from from this study were as follows. 1. The appearance of impulsive energy transmission was different to the direction of impulse to the mandible. 2. The impulsive stress and deformation were larger in lingual or medial side than buccal or lateral in the mandible. 3. The velocity, appearance of energy transmission and the fracture pattern in mandible were affected rather impulse time than force. 4. The horizontal impact to the one side of mandible did not have effect on the stress and displacement of contralateral mandible. From the above results, fracture pattern in symphysis can be showed as simple or comminuted, multiple or associated in body and angle and solitary in subcondyle area.

• 한국전산구조공학회논문집
• /
• 제17권1호
• /
• pp.21-30
• /
• 2004

본 연구에서는 유한요소법을 이용한 채널단면을 갖는 복합재료 적층 구조물의 자유진동을 다룬다. 복합적층 절판구조물에 고차항 판이론을 적용하기 위하여 개발된 유한요소 프로그램은 Lagrangian 및 Hermite 보간함수를 병용하여 면내회전각 자유도를 포함한 절점 당 8개의 자유도를 갖는다. 전단보정계수의 가정을 필요로 하지 않고 전단변형의 3차항 비선형 특성이 고려된 본 논문의 절판 요소는 국부좌표계와 전체좌표계에 대한 좌표변환행렬에 의하여 요소 당 32×32의 국부요소행렬로 구성된다. 본 해석 프로그램의 결과는 기존의 고전적 이론 및 일차항 이론에 의한 문헌 결과와 비교ㆍ분석하였으며, 화이버 보강각도, 길이-두께비, 기하학적 형상 변화 등의 다양한 매개변수 연구를 수행하였다. 본 연구에서는 특히 경계조건 및 길이-두께비 변화에 따라 예측하기 힘든 복잡한 거동을 보이는 복합적층 채널단면 구조물의 자유진동에 대하여 정밀한 고차항 이론 적용에 의한 엄밀 해석의 필요성을 제기하였다.