• Food Science of Animal Resources
• /
• v.39 no.5
• /
• pp.756-767
• /
• 2019

This study aimed to evaluate the effect of doneness on the microbial, nutritional, and quality characteristics of 1.5 cm- and 2.0 cm-thick pork neck steaks. Pork neck meat was obtained within 24 h after slaughtering, cut into 1.5 cm- and 2.0 cm-thick slices (n=5), packed in LLD-PE wrap, and stored at $4{\pm}2^{\circ}C$ for 7-10 days until aerobic plate counts (APC) reach 5.51-6.50 Log CFU/g. Then, the pork meat was cooked on a frying pan till it was medium-rare, medium, or well-done. The microbial inhibition rates of the 1.5 cm- and 2.0 cm-thick steak in medium-rare state were 58.26% and 51.70%, respectively, whereas it was 100% for medium-done pork steak of either thickness. The total calories of the 1.5 cm- and 2.0 cm-thick well-done pork steaks were 643.61 kcal/100 g and 675.00 kcal/100 g, respectively, which was higher than that in medium-rare and medium-done steaks. The retention ratios for Fe and K in the well-done steak were significantly lower than those in the medium and medium-rare steak of either thickness (p<0.05). The shear force of the medium-rare and medium steak did not differ, whereas that of the well-done steak was significantly higher than that of the medium-rare steak of either thickness (p<0.05). We observed that the well-done pork steak had tough texture, low mineral content, and high calories. Therefore, consumption of medium and medium-rare pork is more beneficial than that of well-done pork.

• The Korean Journal of Pharmacology
• /
• v.2 no.1 s.2
• /
• pp.21-29
• /
• 1966

Dichloroisoproterenol(DCI) i; one of the well known ${\beta}$-adrenergic receptor blocking agents. According to Moran and Perkins, DCI has sympathomimetic like action in relatively low concentrations. Fleming and Hawkins confirmed that DCI acts upon the receptors concerned with positive chronotropic and inotropic actions in the heart. Vogins reported that DCI, in concentration of $5{\times}10^{-8}$ to $5{\times}10^{-6}g/ml$, had properties of sympathomimetic amine causing positive inotropic and chronotropic actions in normal rat atria. And James and Nadeau found that DCI had not only adrenergic blocking effect in moderate and higher concentrations, but it also blocked the effect on the sinus node by vagal stimulation and of directly administered acetylcholine in higher concentrations. As stated above by many authors, DCI has complicated actions according to its concentrations. Our aim at the present experiments was to study the effects of DCI to the action of ouabain and acetylcholine upon the excised rabbit atria, as well as to the action of barium chloride and acetylcholine upon the excised rabbit intestine. In addition, Pan ax Ginseng is widely used as tonics in oriental nations, its pharmacological action, however, has not been clearly established. So we atempted to investigate the effects of the water extract of Panax Ginseng to the action of ouabain and DCI upon both atria and intestine. The results obtained were as follows. 1) DCI has a negative inotropic effect on the excised rabbit atria at concentration of $10^{-5}$ and a positive inotropic effect at concentration of $10^{-6}$. 2) DCI (at concentration of $10^{-6}$) potentiates the positive inotropic effect of ouabain upon the excised rabbit atria. 3) DCI antagonizes the action of acetylcholine upon the excised rabbit atria. 4) The water extract of Panax Ginseng, at concentration of $10^{-3}$, decreases the contractile force of rabbit atria, and tends to slightly increase that of rabbit atria at $10^{-4}$. 5) The water extract of Panax Ginseng exhibits a synergistic action with ouabain on the contractile force of rabbit atria. 6) DCI, in concentrations of $10^{-7}{\sim}10^{-6}$, depresses the tone and amplitude of contraction of the excised rabbit intestine. The depression of the intestinal tone markedly appears in pretreatment with reserpine 2mg/kg 24 hours. 7) DCI antagonizes the contractile effect of barium chloride on the excised rabbit atria. 8) DCI has no significant influence on the action of acetylcholine upon the excised rabbit intestine. 9) The series of those evidences indicates that DCI has a sympathomimetic-like action and more over a relaxing action directly on the excised rabbit intestine. 10) The water extract of Panax Ginseng in concentrations of $10^{-4}{\sim}10^{-3}$, has transient depression of the intestinal tone, but later gradually recovers its normal motility: 11) The water extract of Panax Ginseng has a synergistic action with ouabain on the intestinal contractility.

• Animal Bioscience
• /
• v.34 no.4
• /
• pp.701-713
• /
• 2021

Objective: The present work was undertaken to evaluate the effects of storage time, choline chloride, and high concentrations of Cu and Zn on the kinetic behavior of vitamin degradation during storage in two vitamin premixes and four vitamin-trace mineral (VTM) premixes. Methods: Two vitamin premixes (with or without 160,000 mg/kg of choline) were stored at 25℃ and 60% humidity. Besides, four VTM premixes were used to evaluate the effects of choline (0 vs 40,000 mg/kg) and trace minerals (low CuSO4+ZnO vs high CuSO4+ZnO) on vitamin stability in VTM premixes stored in room, and the VTM premixes were stored in room temperature at 22℃. Subsamples from each vitamin and VTM premix were collected at 0, 1, 2, 3, 6, and 12 months. The retention of vitamin A (VA), vitamin D3 (VD3), vitamin E (VE), vitamin K3 (VK3), vitamin B1 (VB1), vitamin B2 (VB2), vitamin B3 (VB3), vitamin B5 (VB5), and vitamin B6 (VB6) in vitamin premixes and VTM premixes during storage was determined. The stability of vitamins in vitamin premixes and VTM premixes was determined and reported as the residual vitamin activity (% of initial) at each sampling point. Results: The effect of choline on VK3 retention was significant in vitamin premixes (p<0.05). The negative effect of storage time was significant for the retentions of VD3, VK3, VB1, VB2, VB5, and VB6 in vitamin premix (p<0.05). For VTM premixes, negative effect of storage time was significant (p<0.05) for the losses of vitamin in VTM premixes. Choline and high concentrations of Cu and Zn significantly increased VA, VK3, VB1, and VB2 loss during storage (p<0.05). The supplementation of high concentrations of Cu and Zn significantly decreased the concentrations of VD3 and VB6 (p<0.05) in VTM premixes at extended storage time. Conclusion: The maximum vitamin stability was detected in vitamin and VTM premixes containing no choline or excess Cu and Zn. The results indicated that extended storage time increased degradation of vitamin in vitamin or VTM premixes. These results may provide useful information for vitamin and VTM premixes to improve the knowledge of vitamin in terms of its stability.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.78-86
• /
• 2014

In this paper, a novel intensity-based fiber optic vibration sensor using a mass-spring structure, which consists of four serpentine flexure springs and a rectangular aperture within a proof mass, is proposed and its feasibility test is given by the simulation and experiment. An optical collimator is used to broaden the beam which is modulated by the displacement of the rectangular aperture within the proof mass. The proposed fiber optic vibration sensor has been analyzed and designed in terms of the optical and mechanical parts. A mechanical structure has been designed using theoretical analysis, mathematical modeling, and 3D FEM (Finite Element Method) simulation. The relative aperture displacement according to the base vibration is given using FEM simulation, while the output beam power according to the relative displacement is measured by experiment. The simulated sensor sensitivity of $15.731{\mu}W/G$ and detection range of ${\pm}6.087G$ are given. By using reference signal, the output signal with 0.75% relative error shows a good stability. The proposed vibration sensor structure has the advantages of a simple structure, low cost, and multi-point sensing characteristic. It also has the potential to be made by MEMS (Micro-Electro-Mechanical System) technology.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.330-342
• /
• 1998

Benthic environmental parameters were analysed at 40 stations during the period from April 1995 to February 1996. such as water temperature, salinity, and dissolved oxygen (DO)-concentration in the surface and bottom water layers, grain size, chemical oxygen demand (COD), ignition loss, particulate organic carbon (POC) in the sediment of Youngsan River estuary. The water temperature ranged from 4.1 to $29.8^{\circ}C$ in the surface and 4.0 to $20.7^{\circ}C$ in the bottom layers. Salinity ranged from 15.1 to $33.6\%_{\circ}$ in the surface and 31.5 to $33.2\%_{\circ}$ in the bottom layer. The salinity in the outer pan of the study area was higher than that of inner area from autumn to spring, whereas they remained lower in summer. Dissolved oxygen concentration ranged from 5,1 to 11.2 $mg/\ell$ in the surface, and 0.79 to 10,2 $mg/{\ell}$ in the bottom layers. Hypoxic condition ($\le2.0mg/\ell$) was developed in the bottom water layer from Youngsan dike to Mokpo Harhour in summer due to the summer stratification. The surface sediment type was silty clay with a mean grain size of $9.12{\pm}0.45\phi$. The range of COD was from 6.15 to $15.49mgO_2/g$ with a mean of $10.59{\pm}12.64mgO_2/g$. The COD in the inner stations was relatively higher than that of outer stations, and decreased toward the outer part of the study area. Ignition loss (IL) ranged from 3.35 to $15.45\%$ with a mean of $5.96{\pm}1.91\%$. Principal component analysis was carried out from the following five environmental parameters: water temperature, dissolved oxygen in the bottom layer and mean grain size, clay content and COD in the sediment. The forty stations in the study area were classified into three stational groups. Group I was located in the inner part of the estuary characterised by relatively low surface salinity and bottom water temperature, fine sedimemt texture, high organic matter and low dissolved oxygen concentration during the summer. Meanwhile, Group III showing relatively high bottom salinity and water temperature was located in the outer part of the estuary characterising coarse sediment and low organic content in sediment. Group II was between Group I and Group III. The division of the areal groups had high correlations to the DO in the bottom layer and clay content in the sediment.

• Korean Journal of Food Science and Technology
• /
• v.8 no.3
• /
• pp.136-140
• /
• 1976

To investigate the preservability of Tongil, three types(rough, brown and milled rice) of Tongil and the common variety (being composed of typical varieties) in Korea were stored at a ambient and a low temperature $(15^{\circ}C)$ warehouse from April to October of each year for three years (1972-1974). The results obtained are described as follows; 1) Temperatures of atmosphere and the natural temperature warehouse changed in the same way. 2) Similar changes of relative humidity were observed in atmosphere and both warehouses. 3) Equilibrium moisture content of Tongil at $25^{\circ}C$ was 0.55 % lower in rough and brown rice. 0.33% lower in milled rice than each type of the common variety. 4) Weight loss rate in the natural temperature storage and in the low temperature storage was 1.35% and 0.74% after 6 month storage. 5) The change of fat acidity in browe rice was greater than any others (rough and milled rice). 6) Hardness of Tongil was 1.64kg higher than that of the common variety. 7) Germination rate was about the same during the low temperature storage, but that of brown of the natural temperature storage was abruptly decreased to $23%{\sim}37%$ after August. As a result, it is possible Tongil is applicable to the long-term storage of rice due to Tongil's superior preservability.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.260-266
• /
• 2013

This study was conducted to investigate changes of vegetation and soil characteristics to tidal land of Saemangeum reclaimed land from 2010 to 2012. Soil salinity was 0.16-22.3 dS $m^{-1}$ in the first survey, while the three years later, it was decreased to 0.12-4.22 dS $m^{-1}$. Vegetations were classified as 6 families and 26 species but it was increased to 8 families and 31 species after three years. Numbers of average species in survey site were increased from 7.1 species to 10.6 species. Numbers of vegetation were increased at each survey sites except for survey site 7 : there was decreased halophyte according to decrease in the soil salinity. Biomass production was increased at low production site, and showed highest production in area of dominant vegetation as Phragmites communis. Simpson's dominance ratio(SDR) of main vegetation as Phragmites communis, Calamagrostis epigeios were increased but Suaeda maritima, Salicornia europaea, Puccinellia nipponica and Zoysia sinica were decreased.

• Design & Manufacturing
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2017

In this study, we applied microcellular foaming injection molding process to improve the performance of system air-conditioner drain fan which had been produced by injection molding process and studied the optimization of process conditions through 6-sigma process and response surface method (RSM) to reduce weight and deformation of products. Additive type, melt temperature, mold temperature, and injection screw shape were selected as the factor affecting the weight and deformation of the products by carrying out analysis of trivial many through ANOVA and design of experiment (DOE) method. Among the effect factor, we set the addictive type to Long G/F and screw shape to foaming screw which had the highest level of weight reduction and deformation reduction. The amount of foaming agent gas was set at 60 ml, which was the limit beyond which the weight of product did not decrease any more. For melt temperature and mold temperature, we studied the conditions where both weight and deformation were minimized using the RSM. As a result, we set the melt temperature to $250^{\circ}C$, fixed mold temperature to $20^{\circ}C$, and moving mold temperature to $40^{\circ}C$. The improvement effect was analyzed by appling the selected optimal conditions to the production process using the microcellular foaming injection molding. The results showed that the mean weight of product was measured to be 1,420g which was 19% lower than that measured in the current process. The standard deviations of the weights were found to be similar to those in the current process and it showed a low dispersion. The mean deformation was measured to be 0.9237mm, which represented a 57% reduction compared to the mean deformation in the current process, and the standard deviation decreased from 0.3298mm to 0.1398mm. Moreover, we analyzed the process capability for deformation, and the results showed that the short-term process capability increased from 2.73 to 6.60 which was even higher than targeted level of 6.0.

• Korean Journal of Radiology
• /
• v.20 no.5
• /
• pp.709-718
• /
• 2019

Objective: To investigate the association of myocardial blood flow (MBF) quantified by dynamic computed tomography (CT) myocardial perfusion imaging (MPI) with troponin level and left ventricle (LV) function in patients with ST-segment elevated myocardial infarction (STEMI). Materials and Methods: Thirty-five STEMI patients who successfully had undergone reperfusion treatment within 1 week of their infarction were consecutively enrolled. All patients were referred for dynamic CT-MPI. Serial high-sensitivity troponin T (hs-TnT) levels and left ventricular ejection fraction (LVEF) measured by echocardiography were recorded. Twenty-six patients with 427 segments were included for analysis. Various quantitative parameters derived from dynamic CT-MPI were analyzed to determine if there was a correlation between hs-TnT levels and LVEF on admission and again at the 6-month mark. Results: The mean radiation dose for dynamic CT-MPI was 3.2 ± 1.1 mSv. Infarcted territories had significantly lower MBF (30.5 ± 7.4 mL/min/100 mL versus 73.4 ± 8.1 mL/min/100 mL, p < 0.001) and myocardial blood volume (MBV) (2.8 ± 0.9 mL/100 mL versus 4.2 ± 1.1 mL/100 mL, p = 0.044) compared with those of reference territories. MBF showed the best correlation with the level of peak hs-TnT (r = -0.682, p < 0.001), and MBV showed a moderate correlation with the level of peak hs-TnT (r = -0.437, p = 0.026); however, the other parameters did not show any significant correlation with hs-TnT levels. As for the association with LV function, only MBF was significantly correlated with LVEF at the time of admission (r = 0.469, p = 0.016) and at 6 months (r = 0.585, p = 0.001). Conclusion: MBF quantified by dynamic CT-MPI is significantly inversely correlated with the level of peak hs-TnT. In addition, patients with lower MBF tended to have impaired LV function at the time of their admission and at 6 months.

• Corrosion Science and Technology
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2013

Recently Digital TV industry has drastically been moving the illuminating system, which causes an obvious product change from PDP and LCD to LED model to provide high-definition image. Due to strong competition in the digital industry, TV manufacturers make a great efforts to reduce production cost by using low-priced materials such as steels instead of aluminum and plastic etc. In this paper we have developed a new low-priced electrogalvanized steel sheet, which has a black resin composite layer, to substitute conventional high-priced PCM steel and plastic mold for rear cover panel in the digital TV. The black resin composite was prepared by mechanical dispersion of the mixture solution that consists of high solid polyester resin, melamine hardener, black pigment, micronized silica paste, polyacrylate texturing particle and miscellaneous additives. The composite solution was coated on the steel sheet using roll coater followed by induction furnace curing and cooling. Although the coated layer has a half thickness compared to the conventional PCM steels having $23{\mu}m$ thickness, it exhibits excellent quality for the usage of rear cover panel. The new steel sheet was applied to test products to get quality certification from worldwide electronic appliance customers. Detailed discussion provides in this paper including preparation of composite solution, roll coating technology, induction curing technology and quality evaluation from customers.